Filter By

Brand

Brand

CLEARANCE - Axalta ViterClad 50 Finish

Axalta ViterClad 50 Finish is a two pack recoatable polyurethane finish specially formulated for the maintenance and repainting of architectural cladding, especially recommended for the maintenance of Corus Colorcoat HP200 and HPS200 cladding. Available in 350+ colours Expected system lifetime up to 15 years (depending on exposed...

Price £55.81 Regular price £111.63
In stock

CLEARANCE - Bradite One Can

Bradite One Can is a quick-drying primer/finish coat in one can, with excellent adhesion, stain blocking and anti-corrosive properties. Suitable for use over most properly cleaned and prepared commercial wood, uPVC, glass, plastic and metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Available in...

Price £9.99 Regular price £19.95
In stock

CLEARANCE - Bradite Industrial Degreaser

Bradite Industrial Degreaser is an aqueous alkaline low foaming detergent used for degreasing contaminated surfaces prior to painting. Ideally suited for degreasing oily or soiled surfaces and for removing road dirt. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Biodegradable in general use...

Price £5.69 Regular price £11.38
In stock

CLEARANCE - Bradite Pre-Treat Galvanised Steel

Bradite Pre-Treat Galvanised Steel is a mordent solution used as a pre-treatment for galvanised steel, to provide a key for all paint primers and finishes. Easy to use solution; clean up with water after use. Advantages British gas reference BGC MO1. Department of Transport Item NO:155. ISO 9001:2008 ISO 140001:2004 1 x 1l available...

Price £5.25 Regular price £10.51
In stock
All sale products

Need Help?

There are 8 products.

Showing 1-8 of 8 item(s)

Active filters

Rust-Oleum 5412 Epoxy Filler

Rust-Oleum 5412 Epoxy Filler is a solvent free, two component epoxy putty for repair of small cracks, air-pockets and/or blow-holes in concrete walls and floors. Extremely strong: 3x stronger than concrete Solvent-free and shrink-free Easy 1:1 mixing ratio Low odour For indoor and outdoor use

Price £34.17
In stock

Remmers WP Sulfatex Rapid

Remmers WP Sulfatex Rapid (formerly Sulfatex Rapid Filler) is a quick-setting waterproofing mortar for grouting and filling with high sulphate resistance. Quick, waterproof repair of defective areas Joint and surface filler Fast curing Water pressure tight High sulphate resistance and low active alkali content (SR/NA)

Price £65.52
In stock

Remmers Mould Restoration Filler

Remmers Mould Restoration Filler is a mineral surface filler & fine render with high water retention capacity used to smooth Mould Restoration Panels SLP CS to produce a fine & closed render surface ready to paint in indoor areas. Capillary active & diffusive, insensitive to moisture, high adhesion, application of one layer ≤ 2mm....

Price £40.80
In stock

Remmers iQ-Fill Q4

Remmers iQ-Fill Q4 is a mineral surface filler with high capillary conductivity for smoothing iQ Fill and iQ Top SP in the iQ Therm-System and for filling works according to quality levels 'Q2 - Q4 - smoothed' indoors. The fine filler is smooth, has good filling properties, is green stable, can be feathered out to zero and adheres tightly....

Price £45.22
In stock

Mathys Mur-Filler

Mathys Mur-Filler is an elastic joint filler that contains quartz for the preparation of active and non-active cracks, can be used interior and exterior. Elastic High filling power Not sandable (contains quartz)

Price £3.81
In stock

Mathys Plastopan Latex

Mathys Plastopan Latex is a water based, extra white, flexible putty filler for equalising inside walls before applying a latex coating. Easy to apply, easy to sand and can be used on alkaline substrates. Easy to apply Easy to sand Can be applied on alkaline substrates

Price £17.78
In stock

Sikadur 52 Injection Type N

Sikadur 52 Injection Type N is a two part, solvent-free, low viscosity injection liquid, based on high strength epoxy resin. Type N (= Normal Potlife) is used for substrate temperatures between +5°C and +30°C (UK). Used as an injection resin with good adhesion to concrete, mortar, stone, steel and wood.  Features & Benefits...

Price £49.48
In stock

Sika Concrete Crack Repair

Sika Concrete Crack Repair is a two part grey epoxy paste, mix in the tube adhesive for high strength repairs to concrete. Can be injected into cracks, can be used on damp concrete, excellent adhesion, economic - only use as much as required, can be applied in vertical and overhead situations, resistant to water, chemicals and solvents....

Price £192.02
In stock

Open a Credit Agreement Trade Account at Rawlins Paints

To open a Credit Agreement Trade Account at Rawlins Paints, simply click on the link below to download a Account Application Form. Once filled in, please return the Application Form to [email protected]

Alongside standard Technical and Sales Support Rawlins Paints offers to its customers, Credit Agreement Trade Account members will also benefit from:

  • 30 Days Credit
  • Preferential Pricing
  • Access to Training
  • Further Guarantees and Warranties
  • And More

For further information, contact [email protected]

Download you Credit Agreement Trade Account Application Form here.