Quelfire have over 40 years’ experience as one of the UK’s leading passive fire protection manufacturers for buildings of all sizes, types, and ages. Quelfire’s anti-fire systems have been tested to the latest BS & EN standards, and a range of fire collars, fire sleeves and intumescent wraps also carry CE Mark Certification.
Installed on thousands of projects throughout the world, including many hotels, apartments, care homes and offices, Quelfire’s products are also used frequently on the London Underground. Quelfire work with a whole host of contractors specialising in firestopping, mechanical, electrical and façades such as specifiers, architects, engineers, and contractors to ensure a fully tested and compliant firestopping solution is reached:
Click to see more information on Quelfire and their range of fire stopping products further below.
There are 17 products.
Accessories for use with Quelfire fire stopping products and systems.
Quelfire CFC Ceiling Fan Cuffs prevent the spread of fire through ceilings where plastic ceiling fans penetrate the fire line plasterboard, with built in spring clips holding it to the plasterboard ceiling. Up to 90 minutes Integrity and Insulation. More Information
Quelfire Intumescent & Acoustic Putty Pads are designed to maintain the fire resistance (up to 2 hours) of plasterboard partitions where they have been penetrated by single or double plastic or metal electric socket boxes. They also make a significant contribution to the reduction of air leakage in properties, helping reduce energy costs...
Quelfire MW Mineral Wool Shuttering Slab, a non-combustible mineral wool batt which will provide increased fire resistance when used as a shutter for fire protection compounds. It is easy to cut facilitating installation around services and is used as a fire resistant permanent or temporary shuttering to all types of fire protection compound....
QF2 Fire Protection Compound is intended for use as a gap filling material where cables and pipework services penetrate fire compartment floors and walls. Up to 4 hours fire rating, tested to BS 476-20-1987 and BS EN1366-3-2009. It expands slightly on curing (0.1%), to form a rigid seal and is also suitable for use in load bearing situations....
Quelfire QFP QuelStop Intumescent Fire Pillows help prevent the spread of fire through metal cable trunking systems that penetrate through flexible and rigid fire compartment walls, with up to 60 mins integrity Can be used inside steel cable trunking up to 150x150mm where they penetrate fire compartment walls. More Information
Quelfire QI Intufoam Linear Gap Seal is a versatile fire resistant linear gap seal intended to provide a fire stop seal for linear joints or at the junction of compartment floors and walls. The compressible foam core accommodates different joint widths and a number of products are available providing different fire ratings, in different gaps...
Quelfire QIF Insulated Fire Sleeve prevents the spread of fire where combustible (plastic) and non-combustible (metal) pipes penetrate fire compartment walls and floors, for up to 4 hours. Suitable for use in concrete floors and various wall constructions including solid concrete masonry/block walls and flexible fire rated plasterboard...
Quelfire QRS Intumescent Fire Sleeves prevent the spread of fire where plastic ducts penetrate fire compartment walls, for up to 2 hours. Requires no mechanical fixing or framework support, relying on the fire rated wall construction, plasterboard or solid masonry/block (or QuelStop Fire Batt) to hold it in place. Slim version available for...
Quelfire QRS Intumescent Slim Fire Sleeves prevent the spread of fire where plastic ducts penetrate fire compartment walls, for up to 2 hours (note: QRS220/90SS is rated 60 minutes only). They are specifically designed to be slim for applications where there is limited space around the duct. Requires no mechanical fixing or framework support,...
QuelCoil CE Marked Continuous Intuwrap is a universal intumescent pipe wrap used to maintain the fire rating of walls where they have been penetrated by plastic pipes and/or metallic pipes with combustible insulation, up to 2 hour fire rating (EI120). Cut to length on site to suit the specific pipe diameter and material. It can be used around...
QuelStop Fire Batt System, a coated mineral wool board used to reinstate the fire rating of wall and floor constructions where they have been penetrated by services, up to a 2 hour fire rating. Available alongside QuelStop Ablative Coating, a flexible coating for use when installing the QuelStop Ablative Coated Fire Batt system. QuelStop Fire...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
