List of products by brand Rawlins Testing Equipment

Bresle Patch Test

The Bresle Test will measure water-soluble salts and corrosion products on blast-cleaned steel. These compounds are almost colourless and are localized at the lowest point of the rust pits. Compliant with ISO 8502-6 and ISO 8502-9 Supplied in an industrial foam-filled Carrying Case with Bresle Patches (pack of 35), Conductivity Meter,...

Price £318.50 (ex. VAT)

Shop now

Trustpilot

 In Stock and Available for Delivery

Coating Thickness Meter

One of the most advanced portable Coating Thickness Meters on the market, measuring all coatings on metallic substrates using the magnetic induction or eddy-current principles, ensuring the correct coating thickness has been applied. Supplied in an industrial foam-filled carrying case with probes, set of 8 Calibration Foils & Zero Disks....

Price £514.50 (ex. VAT)

Shop now

Trustpilot

 In Stock and Available for Delivery

Cross Hatch Cutter

The Cross Hatch Cutter is a multi-blade cutting tool which enables an assessment to be made of the adhesion resistance of coatings to separation from substrates. The coating thickness determines the Cutter size used. Available in the following Cross Hatch Cutter models:  X2001 1mm Cutter - Suitable for coatings under 60 microns X2002...

Price £318.50 (ex. VAT)

Shop now

Trustpilot

 In Stock and Available for Delivery

Dewpoint Meter

The Dewpoint Meter enables testing for the estimation of the probability of condensation on a surface to be painted and establishing whether conditions are suitable for painting or not. Sounds an alarm and changes display colour when dewpoint is below 3°C Shows measurements of relative humidity, dew point and air temperature...

Price £416.50 (ex. VAT)

Shop now

Trustpilot

 In Stock and Available for Delivery

Dust Tape Test

The Dust Tape Test using the Dust Test Tape and Dust Test Comparator will allow you to assess the quantity and size of dust particles on blast-cleaned steel. Dust particles on blast-cleaned steel surfaces may reduce the adhesion of applied coatings, and by absorbing moisture may promote the corrosion of the steel surface. Compliant with...

Price £122.50 (ex. VAT)

Shop now

Trustpilot

 In Stock and Available for Delivery

Gloss Meter

The Gloss Meter will measure the gloss and haze* of a surface where an aesthetic appearance of the coating finish is required and to ensure uniformity of the surface finish. Gloss is measured with angles of 60° and 20°. The 60° angle is universal for all applications. The 20° angle gives improved differentiation of measurement on high-gloss...

Price £975.10 (ex. VAT)

Shop now

Trustpilot

 In Stock and Available for Delivery

HATE Adhesion Tester

One of the most accurate and versatile adhesion testers currently available, the HATE Adhesion Tester measures the adhesion bond strength of applied coatings with ease and precision. Calibration Certificate, with traceability to UKAS, can be purchased separately from the drop-down menu below Supplied in an industrial foam-filled Carrying...

Price £1,298.50 (ex. VAT)

Shop now

Trustpilot

 In Stock and Available for Delivery

Holiday Detector

The Holiday Detector is a DC voltage Holiday Detector for detecting pinholes and flaws in insulated coatings on conductive substrates. Where coatings must provide an effective safeguard against corrosion, it is essential that any pinholes or flaws that will eventually lead to corrosion are detected at the earliest possible stage, preferably...

Price £1,200.50 (ex. VAT)

Shop now

Trustpilot

 In Stock and Available for Delivery

ISO Rust Grade Book

The ISO Rust Grade Book specifies a series of Rust Grades and Preparation Grades of blast-cleaned steel surfaces. The various Grades are defined by written descriptions together with photographs. Compliant with ISO 8501-1 Identifies four levels (designated as Rust Grades) of mill scale and rust commonly found on surfaces of uncoated...

Price £318.50 (ex. VAT)

Shop now

Trustpilot

 In Stock and Available for Delivery

Paint Inspection Kit (Metric) (K3001)

The Paint Inspection Kit contains all the essential equipment needed for the testing of blast-cleaned steel and coating inspection. Supplied in an industrial Carrying Case with Testex Replica Tape / Replica Tape Gauge,  Bresle Patch Test, Dust Tape Test, Dewpoint Meter, Coating Thickness Meter (C5001) and Wet Film Gauge (pack of 5). When...

Price £1,494.50 (ex. VAT)

Shop now

Trustpilot

 In Stock and Available for Delivery

Pinhole Detector

The Pinhole Detector will detect pinholes and flaws in coatings on conductive substrates using the wet sponge principle to detect through-pinholes, cracks and damaged areas on non-conductive coatings on conductive substrates.  These flaws would eventually lead to corrosion and premature failure of the coating. Compliant to ISO 29601...

Price £318.50 (ex. VAT)

Shop now

Trustpilot

 In Stock and Available for Delivery

Surface Roughness Comparator

The Surface Roughness Comparator is a precision nickel comparator plate for grit and shot-blast surface roughness comparison measurement. The Surface Roughness Comparator is supplied in a protective Wallet. Available in the following Surface Roughness Comparator models:  R2006 Surface Roughness Comparator Grit R2007 Surface Roughness...

Price £122.50 (ex. VAT)

Shop now

Trustpilot

 In Stock and Available for Delivery