Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
At Rawlins Paints, we stock a wide range of asphalt, concrete and metal repair products to deal with damage to floors, walls, pipes, driveways and other surfaces.
We have everything from epoxy repair mortars, flexible fillers, self-levelling screeds, emergency pipe repair kits and road repair products to ceramic pipe repair products, for interior and exterior use. If you’re not sure which repair product you need, then get in touch with our Technical Team who will be happy to talk you through the different options.
There are 18 products.
Active filters
A fibre modified concrete for backfilling around manhole frames and gullies and can also be used for surface repairs.HAPAS Approved since 2005 Shrinkage compensated Rapid set: 10-20 minutes 20N/mm² compressive Open to traffic: 90 minutes strength after 90 minutesCoverage Calculator
£1,296.20 (incl. VAT)
£1,080.17 (ex. VAT)
Designed for thick section repairs, haunching reinstatements, ironwork backfilling and commerical sign/post installation.HAPAS Approved since 2005 20N/mm² compressive Rapid set: 10-20 minutes strength in 2 hours Open to traffic: 2 hours • Shrinkage compensatedMore Information Delivery Info
£1,246.93 (incl. VAT)
£1,039.11 (ex. VAT)
Instarmac UltraCrete Enviro Mastic, a hot applied polymer modified mastic asphalt that gives superior performance in the patching and repairing of carriageways, footpaths, footways and cycle tracks or as a surface finish when installing street furniture and access covers.Please note, this product is only available with a minimum order of...
£1,020.28 (incl. VAT)
£850.23 (ex. VAT)
For the patching and reinstating of high friction areas after maintenance work has taken place.Restores anti-skid Fast return to service Available in a range of colours Grey, Buff, Red, Green, Black Easy to use Set time: 1-2 hours Please note: This product is subject to minumum order quantities of 5 units for Black, Green and Red and...
£111.77 (incl. VAT)
£93.14 (ex. VAT)
Instarmac UltraFloor Level IT Two is a mid-strength smoothing underlayment. A two-component system consisting of a powered blend of cements, graded fillers and additives, and a pre-gauged polymer liquid.Suitable for depths between 2-12mm Specifically designed for use over a wide variety of subfloors including: concrete, sand & cement,...
£288.13 (incl. VAT)
£240.11 (ex. VAT)
Instarmac UltraFloor Level IT Bond is a rapid curing, high performance free flowing two-part smoothing underlayment. It consists of a powdered component incorporating a blend of high specification cements, graded fillers and additives and a pre-gauged high polymer content liquid component. UltraFloor Level IT Bond is suitable for depths...
£441.26 (incl. VAT)
£367.72 (ex. VAT)
Instarmac UltraFloor Level IT Super30 is a high strength, rapid setting and drying smoothing underlayment. A two-component system consisting of a powered blend of high specification cements, graded fillers and additives and a pre-gauged polymer liquid. UltraFloor Level IT Super30 is suitable for depths between 2-15mm.Ready to receive...
£389.74 (incl. VAT)
£324.78 (ex. VAT)
UltraFloor Level IT Renovate is a single part, fibre reinforced smoothing underlayment. The product’s unique formulation consists of a powered blend of cements, graded fillers and additives. UltraFloor Level IT Renovate is suitable for the refurbishment of existing internal and external floors and is suitable for use on both commercial and...
£876.72 (incl. VAT)
£730.60 (ex. VAT)
Instarmac UltraFloor Level IT Smooth is a high strength, single part, cementitious smoothing underlayment, incorporating a blend of specially graded fillers, fine cements and polymers. It can be applied between thicknesses of 2-30mm.Extremely smooth finish ideal for large flooring projects Foot traffic in 2-3 hours & ready to receive...
£903.58 (incl. VAT)
£752.98 (ex. VAT)
Instarmac Ultra Floor Level IT Base is a rapid setting and hardening, high strength, single part, cementitious smoothing underlayment incorporating recycled raw materials. Level IT Base may be mixed up and applied as single units and is especially suited to larger projects where it is deal for pumping applications and can be applied up to...
£862.20 (incl. VAT)
£718.50 (ex. VAT)
Instarmac UltraFloor Level It Top is a polymer rich, high strength, single part, cementitious smoothing underlayment incorporating recycled raw materials. It has exceptional abrasion resistance and is designed for use as a finished wear surface in both industrial and commercial applications. Its early strength development formulation also...
£1,134.36 (incl. VAT)
£945.30 (ex. VAT)
Instarmac UltraFloor Screed It UltraCem is a fibre modified hydraulic binder which, when mixed with graded aggregates and water, can produce a rapid drying high strength screed ready to receive floor finishes such as ceramic/natural stone tiles, wood, lino, carpet etc. between 24hrs and 4 days. UltraCem can be used to form screeds that are...
£658.26 (incl. VAT)
£548.55 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
For asphalt patching we stock Rust-Oleum Asphalt Repair and a Rust-Oleum tamper. It’s a durable bitumen-based patch repair material made up of a liquid binder and polished aggregate. These products can be used to repair holes between 25 and 100mm in size, so it’s great if you have to repair larger asphalt damage to a road surface.
With over 50 Sika products in this repair materials section on rawlinspaints.com, order now and get your purchase delivered in the UK. Popular products include:
Sika MonoTop 610 - a cementitious based steel reinforcement primer and bonding bridge. Also available is Sika MonoTop 620, here.
Sikalastic 1K - a one component, flexible, fibre-reinforced mortar.
Sikatop Seal 107 - a two part polymer modified cementitious waterproof mortar slurry.
Sikascreed Hardtop - a high strength, rapid hardening, floor levelling mortar.
Sikafloor Level 30 - a high performance, cementitious, self levelling and fast drying, cementitious screed.
Sika Damp Proofing Slurry - a 1-component damp proofing and waterproofing mortar for the damp-proofing of underground buildings.
Click here for more information and products from Sika.
Rust-Oleum Verti-Patch is a unique repair product with special lightweight fillers, meaning it can repair damaged vertical render, concrete and stone. Perfect for kerb repair or wall repair, this epoxy repair mortar dries as hard as granite and can be used inside and outside. It’s easy to use and great for frost-spalled concrete surfaces that need to be reinforced.
Very cold weather and temperatures can make concrete tricky to repair. Sometimes conventional repair mortars can’t fully dry or cure in low temperatures and something like Coo-Var CSP Mortar is needed. This is an epoxy-based repair mortar for concrete surfaces (either walls or floors) that need to be repaired before they can be painted or coated, or just need a stand-alone repair.
For a really fast repair to concrete, troughs, ramps, coving and steps, Rust Oleum Speed Patch works well. It sets fast and is a very high-strength concrete repair mortar, giving you the finish you want with the minimum of fuss and expense.
If you need a very strong floor repair, choose Rust-Oleum Epoxy Repair Mortar. This product is actually stronger than concrete, making it perfect to repair floors that endure a lot of heavy traffic. Specifically for fixing and repairing bay edges, eroded or damaged concrete and broken steps, this epoxy mortar doesn’t shrink or crack. It can be used inside or outside and means the surface will quickly be back in action. Repairs made with this product are pretty much indestructible.
For quick and lighter repairs on concrete floors and walls, try Rust-Oleum Light Duty Epoxy Repair and Sikagard 720 EpoCem, which is a three part epoxy and cement combination micro mortar for surface repairs.
Smoothing uneven surfaces and floors calls for a fast acting and durable product, like Rust-Oleum Speed Screed. Ideal for transforming rough concrete floors this is a self-smoothing screed that leaves a slip-resistant surface in a light grey colour. Ideal for industrial areas that are exposed to heavy traffic and chemicals.
Rust-Oleum’s Scrape Coat is also self-levelling and can be used to flatten concrete floors to ensure a smooth, safe surface. Solvent-free, scrape coat provides a seamless finish and is simple to use.
SikaLevel Latex Ultra is a very quick setting cement-based powder that can be mixed with water and used to level out uneven floors and screeds. It can either be covered with a floor coating or can be left as is for a smooth, even surface. Another powder repair product, Rust-Oleum Pegacrete can also be mixed with water to level and repair cracks in cement renderings, concrete and brickwork. It’s guaranteed not to shrink and can be used inside or outside.
Fine cracks in concrete need specific products to fix and repair them. A specifically developed liquid crack filler for concrete, Rust-Oleum Epoxyshield Fine Crack Repair that is guaranteed to be non-shrink ensuring a smooth finish to the concrete surface. This is an economic way to repair a concrete floor and works well for cracks up to 3mm wide.
