Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
There are 772 products.
Active filters
Fosroc Nitoseal MS600 is a one part, engineering sealant for immersed conditions based on hybrid silyl modified polyether technology. Suitable for use for sealing movement joints in buildings and civil engineering structures including joints that will be subject to intermittent or permanent immersion. Typical applications include - Potable...
£20.66 (incl. VAT)
£17.22 (ex. VAT)
Fosroc Nitoseal MS100 is a one-part, primerless*, damp tolerant, non-staining façade sealant producing a tough, durable elastomeric seal. Uses: Formulated for stain-free sealing of joints in and around concrete, brick, masonry, pre-cast panels, stone cladding, windows, doors and fibre cement sheeting. Suitable for use over a wide range of...
£338.75 (incl. VAT)
£282.29 (ex. VAT)
Fosroc Hydrocell XL is a cross linked, semi-rigid, closed cell polyethylene sheet material used for forming or filling expansion joints between adjacent in-situ or precast components. Suitable for use in concrete, brickwork and blockwork providing excellent support to sealants subject to hydrostatic pressure and is particularly recommended...
£86.17 (incl. VAT)
£71.81 (ex. VAT)
Resimac 101 Metal Repair Paste is a two component solvent free epoxy metal repair compound designed to fill surface erosion & corrosion on metallic surfaces and, once cured, is readily machinable.Apply to mechanically & abrasive blast cleaned surfaces High mechanical adhesion to metal substrates Apply at thicknesses up to 25mm...
£112.39 (incl. VAT)
£93.66 (ex. VAT)
Resimac 102 Metal Repair Fluid is a two component solvent free epoxy metal repair fluid designed to resurface and protect metallic surfaces and, once cured, is readily machinable.Suitable for filling mechanically or abrasive blast cleaned surfaces where excessive pitting and scarring has been caused by corrosion or chemical attack The...
£96.34 (incl. VAT)
£80.28 (ex. VAT)
Resimac 103 Metal Repair Stick is a two component repair material in stick form to seal or rebuild damaged surfaces, which cures rapidly at room temperature after mixing. It is a metal repair adhesive which develops high mechanical strength in a short period of time. Typical applications include cracked pump or valve casings, scored hydraulic...
£181.44 (incl. VAT)
£151.20 (ex. VAT)
104 Metal Repair Fluid XF is a two component fast curing solvent free epoxy metal repair fluid. The product has been designed for use on a wide range of surfaces and is tolerant of less than ideal surface preparation and surfaces contaminated with grease, oil and lubricants. Suitable for emergency repairs to worn surfaces, as an anti-slip...
£58.21 (incl. VAT)
£48.51 (ex. VAT)
Resimac 105 Aqua Stick is a two component repair material in stick form which cures underwater after mixing. It is a metal repair adhesive which develops high mechanical strength in a short period of time. Suitable for repairs to concrete and metallic surfaces underwater. For professional use onlyMore Information Delivery Info
£181.44 (incl. VAT)
£151.20 (ex. VAT)
106 Metal Repair Fluid XF is a fast curing two component solvent free epoxy metal repair compound. The product has been designed for use on a wide range of metallic surfaces, including underwater applications, and once cured is readily machineable. Typical applications include damaged pump shafts, cracked pump or valve casings, damaged...
£82.46 (incl. VAT)
£68.72 (ex. VAT)
107 Metal Repair Paste XL is a two component solvent free epoxy metal repair compound. The product has an extended usable life for applications in warmer climates and has been designed for use on a wide range of metallic surfaces and once cured is readily machinable. Suitable for emergency repairs or part of planned maintenance to equipment...
£389.36 (incl. VAT)
£324.47 (ex. VAT)
201 Ceramic Repair Paste is a two component solvent free epoxy repair compound containing hardened ceramic fillers designed to fill surface erosion & corrosion on metallic surfaces.Typical applications include worn impellers, damaged valves, separator housings, damaged pump casings, eroded pipe work, propeller, bow thrusters, rudders,...
£112.39 (incl. VAT)
£93.66 (ex. VAT)
Resimac 202 Ceramic Repair Fluid is an erosion/ corrosion resistant for heavy abrasion environments. The product contains hardened ceramic fillers and is ideal for protecting metallic surfaces in aggressive fluid flow environments.Typical applications include worn impellers, damaged valves, separator housings, damaged pump casings, eroded...
£112.39 (incl. VAT)
£93.66 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
For asphalt patching we stock Rust-Oleum Asphalt Repair and a Rust-Oleum tamper. It’s a durable bitumen-based patch repair material made up of a liquid binder and polished aggregate. These products can be used to repair holes between 25 and 100mm in size, so it’s great if you have to repair larger asphalt damage to a road surface.
With over 50 Sika products in this repair materials section on rawlinspaints.com, order now and get your purchase delivered in the UK. Popular products include:
Sika MonoTop 610 - a cementitious based steel reinforcement primer and bonding bridge. Also available is Sika MonoTop 620, here.
Sikalastic 1K - a one component, flexible, fibre-reinforced mortar.
Sikatop Seal 107 - a two part polymer modified cementitious waterproof mortar slurry.
Sikascreed Hardtop - a high strength, rapid hardening, floor levelling mortar.
Sikafloor Level 30 - a high performance, cementitious, self levelling and fast drying, cementitious screed.
Sika Damp Proofing Slurry - a 1-component damp proofing and waterproofing mortar for the damp-proofing of underground buildings.
Click here for more information and products from Sika.
Rust-Oleum Verti-Patch is a unique repair product with special lightweight fillers, meaning it can repair damaged vertical render, concrete and stone. Perfect for kerb repair or wall repair, this epoxy repair mortar dries as hard as granite and can be used inside and outside. It’s easy to use and great for frost-spalled concrete surfaces that need to be reinforced.
Very cold weather and temperatures can make concrete tricky to repair. Sometimes conventional repair mortars can’t fully dry or cure in low temperatures and something like Coo-Var CSP Mortar is needed. This is an epoxy-based repair mortar for concrete surfaces (either walls or floors) that need to be repaired before they can be painted or coated, or just need a stand-alone repair.
For a really fast repair to concrete, troughs, ramps, coving and steps, Rust Oleum Speed Patch works well. It sets fast and is a very high-strength concrete repair mortar, giving you the finish you want with the minimum of fuss and expense.
If you need a very strong floor repair, choose Rust-Oleum Epoxy Repair Mortar. This product is actually stronger than concrete, making it perfect to repair floors that endure a lot of heavy traffic. Specifically for fixing and repairing bay edges, eroded or damaged concrete and broken steps, this epoxy mortar doesn’t shrink or crack. It can be used inside or outside and means the surface will quickly be back in action. Repairs made with this product are pretty much indestructible.
For quick and lighter repairs on concrete floors and walls, try Rust-Oleum Light Duty Epoxy Repair and Sikagard 720 EpoCem, which is a three part epoxy and cement combination micro mortar for surface repairs.
Smoothing uneven surfaces and floors calls for a fast acting and durable product, like Rust-Oleum Speed Screed. Ideal for transforming rough concrete floors this is a self-smoothing screed that leaves a slip-resistant surface in a light grey colour. Ideal for industrial areas that are exposed to heavy traffic and chemicals.
Rust-Oleum’s Scrape Coat is also self-levelling and can be used to flatten concrete floors to ensure a smooth, safe surface. Solvent-free, scrape coat provides a seamless finish and is simple to use.
SikaLevel Latex Ultra is a very quick setting cement-based powder that can be mixed with water and used to level out uneven floors and screeds. It can either be covered with a floor coating or can be left as is for a smooth, even surface. Another powder repair product, Rust-Oleum Pegacrete can also be mixed with water to level and repair cracks in cement renderings, concrete and brickwork. It’s guaranteed not to shrink and can be used inside or outside.
Fine cracks in concrete need specific products to fix and repair them. A specifically developed liquid crack filler for concrete, Rust-Oleum Epoxyshield Fine Crack Repair that is guaranteed to be non-shrink ensuring a smooth finish to the concrete surface. This is an economic way to repair a concrete floor and works well for cracks up to 3mm wide.
