Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
There are 772 products.
Active filters
Fosroc Supastik E10 Adhesive is a two-pack epoxy adhesive for use on concrete. Suitable for use as an adhesive with selected Fosroc products including Fosroc Expoband H45. Please see the Product Data Sheet for the relevant base product for application and mixing details for Supastik E10 Adhesive. More Information Delivery Info
£241.46 (incl. VAT)
£201.22 (ex. VAT)
A solvent based fibrous acrylic coating designed for application onto manual prepared surfaces and in colder climates. The coating has been designed as an emergency waterproof coating that can be applied to leaking mineral felt, GRP, Metal and concrete surfaces. The product can be used for small in-situ repairs or as a low cost short term...
£117.00 (incl. VAT)
£97.50 (ex. VAT)
Sika 1 Pre-Bagged Spritz & Bonding Coat Mortar is part of the Sika 1 Pre-Bagged Structural Waterproofing System and is the first layer of the render or screed system. These special mortars are pre-bagged kiln dried blends of specially graded aggregates and cements, with waterproofing admixtures, packaged in 4 grades at the appropriate mix...
£59.98 (incl. VAT)
£49.98 (ex. VAT)
Sika 1 Pre-Bagged Screed Mortar is part of the Sika 1 Pre-Bagged Structural Waterproofing System and is the third layer of the floor screed system. These special mortars are pre-bagged kiln dried blends of specially graded aggregates and cements, with waterproofing admixtures, packaged in 4 grades at the appropriate mix ratios for optimum...
£55.56 (incl. VAT)
£46.30 (ex. VAT)
Resichem 570 Concrete Patch Repair XF is a self-priming three part solvent free epoxy repair mortar designed for use on cementitious surfaces. The product offers good chemical and abrasion resistance and is ideal for quick repairs to damaged concrete substrates. Suitable for rebuilding floors, steps, ramps, and coving expansion joints. For...
£66.60 (incl. VAT)
£55.50 (ex. VAT)
Resichem 571 Concrete Repair LW is a light weight three part solvent free epoxy repair mortar designed for use on cementitious surfaces. The light weight nature of the material makes it ideal for repairs to overhead columns, sills and vertical concrete surfaces. Suitable for rebuilding lintels, sills, walls, and ceilings. For professional...
£66.60 (incl. VAT)
£55.50 (ex. VAT)
Resichem 572 Concrete Seal CWC is a single component, engineering grade, polymer modified, reactive cementitious coating with high adhesive properties. It is used in permanent immersion or negative pressure waterproofing. It incorporates the most advanced micro-silica, polymer and fibre technology, curing to give a dense matrix which is...
£126.00 (incl. VAT)
£105.00 (ex. VAT)
Resichem 573 Fastfill Screed is a single component fast curing engineering grade, polymer modified, reactive cementitious coating with high adhesive properties. It is used in permanent immersion or negative pressure waterproofing. It incorporates the most advanced micro-silica, polymer and fibre technology, curing to give a dense matrix which...
£126.00 (incl. VAT)
£105.00 (ex. VAT)
Resichem 574 Fastfill Plug is a single component fast curing engineering grade, polymer modified, reactive cementitious putty for arresting water seepage and infiltration under pressure through cracks, joints and voids in concrete and masonry. For professional use only Please note: this product is subject to a 28 Working Day lead time More...
£90.00 (incl. VAT)
£75.00 (ex. VAT)
Resichem 575 Expansion Joint Filler is a pitch modified two part polyurethane sealant for filling/sealing expansion joints. Suitable for concrete paved areas, airfield runways, major carriageways, docks, container depots, industrial factories and warehousing. It is capable of accommodating movement and severe climatic conditions, as well as...
£171.00 (incl. VAT)
£142.50 (ex. VAT)
Resimac 302 Epoxy Repair Cement is a high performance, two pack, solvent-free epoxy repair system for use on metallic surfaces. The product is ideal for applications where only minimal surface preparation can be carried out. Suitable for rebuilding corrosion pitting on metallic structures such as internal/ external tank surfaces, pipelines...
£105.84 (incl. VAT)
£88.20 (ex. VAT)
Resichem 576 Quartz Screed is an epoxy resin based solvent free high build trowel screed. The product has been designed to be applied to uneven concrete surfaces to a wet film thickness of 10-30mm (3/8”- 1 1/4”). On curing the product will ensure any imperfections on the surface of the concrete are reduced. Ideal for coating concrete floors,...
£225.00 (incl. VAT)
£187.50 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
For asphalt patching we stock Rust-Oleum Asphalt Repair and a Rust-Oleum tamper. It’s a durable bitumen-based patch repair material made up of a liquid binder and polished aggregate. These products can be used to repair holes between 25 and 100mm in size, so it’s great if you have to repair larger asphalt damage to a road surface.
With over 50 Sika products in this repair materials section on rawlinspaints.com, order now and get your purchase delivered in the UK. Popular products include:
Sika MonoTop 610 - a cementitious based steel reinforcement primer and bonding bridge. Also available is Sika MonoTop 620, here.
Sikalastic 1K - a one component, flexible, fibre-reinforced mortar.
Sikatop Seal 107 - a two part polymer modified cementitious waterproof mortar slurry.
Sikascreed Hardtop - a high strength, rapid hardening, floor levelling mortar.
Sikafloor Level 30 - a high performance, cementitious, self levelling and fast drying, cementitious screed.
Sika Damp Proofing Slurry - a 1-component damp proofing and waterproofing mortar for the damp-proofing of underground buildings.
Click here for more information and products from Sika.
Rust-Oleum Verti-Patch is a unique repair product with special lightweight fillers, meaning it can repair damaged vertical render, concrete and stone. Perfect for kerb repair or wall repair, this epoxy repair mortar dries as hard as granite and can be used inside and outside. It’s easy to use and great for frost-spalled concrete surfaces that need to be reinforced.
Very cold weather and temperatures can make concrete tricky to repair. Sometimes conventional repair mortars can’t fully dry or cure in low temperatures and something like Coo-Var CSP Mortar is needed. This is an epoxy-based repair mortar for concrete surfaces (either walls or floors) that need to be repaired before they can be painted or coated, or just need a stand-alone repair.
For a really fast repair to concrete, troughs, ramps, coving and steps, Rust Oleum Speed Patch works well. It sets fast and is a very high-strength concrete repair mortar, giving you the finish you want with the minimum of fuss and expense.
If you need a very strong floor repair, choose Rust-Oleum Epoxy Repair Mortar. This product is actually stronger than concrete, making it perfect to repair floors that endure a lot of heavy traffic. Specifically for fixing and repairing bay edges, eroded or damaged concrete and broken steps, this epoxy mortar doesn’t shrink or crack. It can be used inside or outside and means the surface will quickly be back in action. Repairs made with this product are pretty much indestructible.
For quick and lighter repairs on concrete floors and walls, try Rust-Oleum Light Duty Epoxy Repair and Sikagard 720 EpoCem, which is a three part epoxy and cement combination micro mortar for surface repairs.
Smoothing uneven surfaces and floors calls for a fast acting and durable product, like Rust-Oleum Speed Screed. Ideal for transforming rough concrete floors this is a self-smoothing screed that leaves a slip-resistant surface in a light grey colour. Ideal for industrial areas that are exposed to heavy traffic and chemicals.
Rust-Oleum’s Scrape Coat is also self-levelling and can be used to flatten concrete floors to ensure a smooth, safe surface. Solvent-free, scrape coat provides a seamless finish and is simple to use.
SikaLevel Latex Ultra is a very quick setting cement-based powder that can be mixed with water and used to level out uneven floors and screeds. It can either be covered with a floor coating or can be left as is for a smooth, even surface. Another powder repair product, Rust-Oleum Pegacrete can also be mixed with water to level and repair cracks in cement renderings, concrete and brickwork. It’s guaranteed not to shrink and can be used inside or outside.
Fine cracks in concrete need specific products to fix and repair them. A specifically developed liquid crack filler for concrete, Rust-Oleum Epoxyshield Fine Crack Repair that is guaranteed to be non-shrink ensuring a smooth finish to the concrete surface. This is an economic way to repair a concrete floor and works well for cracks up to 3mm wide.
