Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
There are 772 products.
Active filters
Keim Silex OH is an ethyl silicate stone consolidant which can be overcoated, for use on any porous mineral substrate including natural stone, sandstone and render.Density: Q = 0.992g/cm3. Flash Point: 2°C.More Information Delivery Info Consumption Rate Samples
£279.00 (incl. VAT)
£232.50 (ex. VAT)
For essential concrete floor repairs during the winter months and cold environments. Ideal for use in freezer or chiller rooms and unheated areas, inside or outside. Damaged steps, worn and holed floors, fitting guide rails, different levels, and spalled expansion joints.Use inside or out as low as minus 20°C Heavy duty, polyaspartic...
£175.44 (incl. VAT)
£146.20 (ex. VAT)
A siloxane based water repellent impregnation to reduce the water absorption of mineral substrates, including natural stone. Keim Lotexan is recommended by the manufacturer for stone with lime pointing. Also used as a dust suppressant for numerous mineral and concrete surfaces.Easy to apply Water vapour permeable Totally clear Density:...
£140.10 (incl. VAT)
£116.75 (ex. VAT)
A siloxane based water repellent impregnation to reduce the water absorption of natural stone. Also used as a dust suppressant. Suitable as a water repellent protective treatment.Easy to apply Water vapour permeable Totally clear Surfaces show no sign of treatment For lime-pointed stone, the manufacturer recommends Keim Lotexan...
£140.10 (incl. VAT)
£116.75 (ex. VAT)
Rapid set concrete repair mortar for heavy wear, cold areas, that can be applied at 50mm thick at -20°C. Ideal for use in cold stores, securing railings, poles and posts, roads and manhole frames, etc.Easy to use – just add water, mix, and apply Starts to harden in 10 minutes, fully hard in five hours when suitably insulated (at -10°C)...
£107.82 (incl. VAT)
£89.85 (ex. VAT)
Keim Brillantputz-Rille is a high quality, mineral thin layer, lightweight grooved render made from mineral binders and high-quality fillers. Suitable as a finishing render for all level mineral substrates and as a top coat for Keim Universal Render. Suitable for subsequent application of Keim Mineral Paints.Water absorption: w < 0.5...
£87.00 (incl. VAT)
£72.50 (ex. VAT)
Keim Brillantputz Rauputz is a high quality, mineral thin layer, lightweight rough render made from mineral binders and high-quality fillers. Suitable as a finishing render for all level mineral substrates and as a top coat for Keim Universal Render. Suitable for subsequent application of Keim Mineral Paints.Water absorption: w < 0.5...
£87.00 (incl. VAT)
£72.50 (ex. VAT)
Quick setting, pourable repairs for filling holes in heavily trafficked concrete floors, inside and out. Ideal for filling deep holes before screeding with Watco Flowtop.Flowpatch and Flowpatch Coloured Easy to use rapid dry formula Takes forklifts in just 2 hours Just add water, mix and pour Fibre reinforced for added strength...
£74.40 (incl. VAT)
£62.00 (ex. VAT)
Keim Brillantputz Glattputz is a high quality, mineral thin layer, lightweight smooth render made from mineral binders and high-quality fillers. Suitable as a finishing render for all level mineral substrates and as a top coat for Keim Universal Render. Suitable for subsequent application of Keim Mineral Paints.Water absorption: w < 0.5...
£87.00 (incl. VAT)
£72.50 (ex. VAT)
Keim Ecotec is a solvent free, silicone micro-emulsion based hydrocarbon concentrate for use as an environmentally friendly water repellent and dust suppressant.Environmentally friendly Free from solvents, dilute with water Excellent water repellency Good surface penetrationMore Information Delivery Info Consumption Rate Samples...
£121.14 (incl. VAT)
£100.95 (ex. VAT)
Fast, pourable and strong, heavy-duty repairs for asphalt and tarmac. Ideal for car parks, loading areas, drives and paths, internal asphalt floors, etc.Tough, fibre reinforced repairs for heavy wear areas For concrete see Watco Flowpatch Quick Setting Pourable Repair Mortar Just add water, mix & pour Can be applied to damp (not...
£182.04 (incl. VAT)
£151.70 (ex. VAT)
Carboline Windmastic HSX Repair Kit is two-pack reinforced high solid aliphatic polyurethane matt weathering resistant topcoat with excellent abrasion resistance for use on wind turbine rotor blades.Durable topcoat in combination with epoxy primer for long service life Fast curing Heat resistant up to 110°C continuous High solid, low...
£53.46 (incl. VAT)
£44.55 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
For asphalt patching we stock Rust-Oleum Asphalt Repair and a Rust-Oleum tamper. It’s a durable bitumen-based patch repair material made up of a liquid binder and polished aggregate. These products can be used to repair holes between 25 and 100mm in size, so it’s great if you have to repair larger asphalt damage to a road surface.
With over 50 Sika products in this repair materials section on rawlinspaints.com, order now and get your purchase delivered in the UK. Popular products include:
Sika MonoTop 610 - a cementitious based steel reinforcement primer and bonding bridge. Also available is Sika MonoTop 620, here.
Sikalastic 1K - a one component, flexible, fibre-reinforced mortar.
Sikatop Seal 107 - a two part polymer modified cementitious waterproof mortar slurry.
Sikascreed Hardtop - a high strength, rapid hardening, floor levelling mortar.
Sikafloor Level 30 - a high performance, cementitious, self levelling and fast drying, cementitious screed.
Sika Damp Proofing Slurry - a 1-component damp proofing and waterproofing mortar for the damp-proofing of underground buildings.
Click here for more information and products from Sika.
Rust-Oleum Verti-Patch is a unique repair product with special lightweight fillers, meaning it can repair damaged vertical render, concrete and stone. Perfect for kerb repair or wall repair, this epoxy repair mortar dries as hard as granite and can be used inside and outside. It’s easy to use and great for frost-spalled concrete surfaces that need to be reinforced.
Very cold weather and temperatures can make concrete tricky to repair. Sometimes conventional repair mortars can’t fully dry or cure in low temperatures and something like Coo-Var CSP Mortar is needed. This is an epoxy-based repair mortar for concrete surfaces (either walls or floors) that need to be repaired before they can be painted or coated, or just need a stand-alone repair.
For a really fast repair to concrete, troughs, ramps, coving and steps, Rust Oleum Speed Patch works well. It sets fast and is a very high-strength concrete repair mortar, giving you the finish you want with the minimum of fuss and expense.
If you need a very strong floor repair, choose Rust-Oleum Epoxy Repair Mortar. This product is actually stronger than concrete, making it perfect to repair floors that endure a lot of heavy traffic. Specifically for fixing and repairing bay edges, eroded or damaged concrete and broken steps, this epoxy mortar doesn’t shrink or crack. It can be used inside or outside and means the surface will quickly be back in action. Repairs made with this product are pretty much indestructible.
For quick and lighter repairs on concrete floors and walls, try Rust-Oleum Light Duty Epoxy Repair and Sikagard 720 EpoCem, which is a three part epoxy and cement combination micro mortar for surface repairs.
Smoothing uneven surfaces and floors calls for a fast acting and durable product, like Rust-Oleum Speed Screed. Ideal for transforming rough concrete floors this is a self-smoothing screed that leaves a slip-resistant surface in a light grey colour. Ideal for industrial areas that are exposed to heavy traffic and chemicals.
Rust-Oleum’s Scrape Coat is also self-levelling and can be used to flatten concrete floors to ensure a smooth, safe surface. Solvent-free, scrape coat provides a seamless finish and is simple to use.
SikaLevel Latex Ultra is a very quick setting cement-based powder that can be mixed with water and used to level out uneven floors and screeds. It can either be covered with a floor coating or can be left as is for a smooth, even surface. Another powder repair product, Rust-Oleum Pegacrete can also be mixed with water to level and repair cracks in cement renderings, concrete and brickwork. It’s guaranteed not to shrink and can be used inside or outside.
Fine cracks in concrete need specific products to fix and repair them. A specifically developed liquid crack filler for concrete, Rust-Oleum Epoxyshield Fine Crack Repair that is guaranteed to be non-shrink ensuring a smooth finish to the concrete surface. This is an economic way to repair a concrete floor and works well for cracks up to 3mm wide.
