Resimac is a UK based manufacturer of epoxy, polyurethane & silicon coatings and repair materials to the Oil & Gas, Petrochemical, Marine, Paper & Pulp, Water, Power Generation & Chemical Industries.
Their team of product development scientists have unparalleled knowledge and industry experience, enabling the company to develop innovative and unique materials for some of the most demanding industrial operating environments.
The product range is capable of protecting process equipment, process systems, metallic and concrete structures from chemical attack, erosion & corrosion, wear & abrasion, UV degradation & weathering, heat loss, and impact.
108 Pipe Repair Tape is a high performance rapid curing moisture activated repair bandage, specifically developed for the repair of leaking pipes (up to 450mm diameter), which is activated by immersion in water. Suitable for metallic, GRP & plastic surfaces.
For professional use only
Multiple tapes may be required depending on the size...
104 Metal Repair Fluid XF is a two component fast curing solvent free epoxy metal repair fluid. The product has been designed for use on a wide range of surfaces and is tolerant of less than ideal surface preparation and surfaces contaminated with grease, oil and lubricants.
Suitable for emergency repairs to worn surfaces, as an anti-slip...
Resimac 101 Metal Repair Paste is a two component solvent free epoxy metal repair compound designed to fill surface erosion & corrosion on metallic surfaces and, once cured, is readily machinable.
Apply to mechanically & abrasive blast cleaned surfaces
High mechanical adhesion to metal substrates
Apply at thicknesses up to 25mm...
Resimetal 109 Self-Amalgamating Repair Tape is a high performance instant curing silicone based repair bandage, specifically developed for the repair of "live" leaking pipes.
For professional use only
Please Note: This product is supplied by the manufacturer in either Black OR Clear depending on the current availablity of raw materials,...
Resichem 511 UCEN is a high build solvent-free epoxy novalac coating designed to provide outstanding chemical and corrosion protection of steel and concrete structures.
The coating is particularly resistant to attack by strong acids including 98% sulphuric acid and 36% hydrochloric acid in immersion conditions. Must be applied as a 2 coat...
Resichem 551 ER Membrane is a solvent based fibrous acrylic coating designed for application onto manual prepared surfaces and in colder climates.
The coating has been designed as an emergency waterproof coating that can be applied to leaking mineral felt, GRP, Metal and concrete surfaces. The product can be used for small in-situ repairs or...
Resimac 204 Heavy Duty Ceramic Repair Paste is a two component solvent free epoxy repair compound which contains 0.2mm – 1.5mm ceramic beads. The product is ideal for resurfacing and protecting metallic substrates subject to medium sliding abrasion.
Typical applications include Pipe bends, Chutes, Hoppers, Valves, Pumps, Pipe surfaces.
For...
301 Epoxy Resin and Hardener is a two component thixotropic solvent free epoxy material used for injection applications, bonding of dissimilar materials and for use in conjunction with 701/702 Glass Tape to produce high strength composite repairs.
Can be applied to manual or mechanically prepared surfaces and then wrapped with woven glass...
Resichem 501 CRSG NF is a high build solvent-free epoxy coating designed for the long term protection of steel and concrete structures against corrosion and chemical attack.
The coating can be applied to mechanical or abrasive blast clean surfaces and will cure at temperatures as low as 8°C
Typical applications include: Pipelines, internal...
Resimac 103 Metal Repair Stick is a two component repair material in stick form to seal or rebuild damaged surfaces, which cures rapidly at room temperature after mixing. It is a metal repair adhesive which develops high mechanical strength in a short period of time.
Typical applications include cracked pump or valve casings, scored hydraulic...
Resichem 575 Expansion Joint Filler is a pitch modified two part polyurethane sealant for filling/sealing expansion joints.
Suitable for concrete paved areas, airfield runways, major carriageways, docks, container depots, industrial factories and warehousing. It is capable of accommodating movement and severe climatic conditions, as well as...
Resichem 575 Expansion Joint Filler Primer is a single component, solvent borne, polyurethane priming coat to be used with Resichem 575 expansion joint filler.
Suitable for priming dry, porous surfaces which form the bonding face to an expansion joint. It can be used on concrete, cementitious or epoxy mortars, timber, and porous stone...
Resimac's industrial coatings and repair products help keep infrastructure running, minimising expensive downtime in critical workplaces. Their product range covers typical applications such as:
