Resurfacing Floor Screeds

Resurfacing and self-levelling floor screeds and compounds available at Rawlins Paints range from economical cementitious based to high performing epoxy and polyurethane screeds – see each product’s data-sheet for full specification. Self levelling floor screeds are used to create an even finish on un-even sub-floors and structures, and can be applied to varying thicknesses using a series of tools and application methods.

Floor screeds and compounds are always a popular choice when planning any flooring project but they can be confusing with such a large range of different products being available and can often be incorrectly chosen. Of the floor screeds available for next day delivery from Rawlins Paints, some of the more popular manufacturers include Sika and Rust-Oleum.

There are 7 products.

Showing 1-7 of 7 item(s)

Active filters

  • Brand: Fosroc
  • Brand: Resin Surfaces Limited

RSL Cemcrete SM/TX

Cemcrete (formerly known as R.S. Cemcrete and Sher-Crete), a water based, polymer modified cementitious coating designed for application to a wide range of floor and wall surfaces. Provides a smooth (SM) or textured (TX), durable finish strongly bonded to the substrate with a degree of flexibility.Can be built up to a range of thicknesses...

Price £60.99 (ex. VAT)
In Stock and Available for Delivery

RSL FasTop Multi Bu

RSL FasTop Multi Bu (formerly known as Resufil) is a three component, granite reinforced polyurethane infill screed designed to fix holes or dents in a concrete subfloor, before overlaying occurs. It can also back-fill drainage waterways.Can be applied from 6mm to 60mm Can back-fill drainage channels Forms falls or ramps Fast curing...

Price £52.91 (ex. VAT)
In Stock and Available for Delivery

Fosroc Cemtop GP

Fosroc Cemtop GP is a polymer modified, cement based, floor levelling compound. Suitable for use as a general purpose self-levelling underlayment before the application of floor finishes such as tiles, carpet, vinyl or Fosroc Cemtop XD. Cemtop GP is also suitable as a floor finish for foot traffic or light commercial areas. Please also see...

Price £61.92 (ex. VAT)
In Stock and Available for Delivery

Fosroc Cemtop XD

Fosroc Cemtop XD is a polymer modified, cement based, floor levelling compound. For use as a heavy duty, highly abrasion resistant floor surfacing system. Suitable for industrial and commercial buildings, for new construction or refurbishment projects. Please also see the 'Uses' table in the Product Data Sheet. Fosroc Cemtop GP is also...

Price £76.46 (ex. VAT)
In Stock and Available for Delivery

Fosroc Nitomortar S

Fosroc Nitomortar S is a solvent-free high strength, abrasion-resistant epoxy reinstatement mortar. Suitable for use for the fast and permanent reinstatement of concrete, particularly where high strength, abrasion-resistance and resistance to chemicals is required. The product is designed for horizontal use but can be applied vertically,...

Price £140.51 (ex. VAT)
In Stock and Available for Delivery

RSL Sher-Crete SLX

Cementitious pumped industrial underlayment and wearing course screed. Suitable for resin flooring toppings, polishing or silicate anti-dust treatment, and underfloor heating systems.Self-levelling industrial grade flooring system Ideal for overcoating with Sherwin-Williams Resuflor, Resudeck, Resupen, Elladur and SofTop resin coating...

Price £31.24 (ex. VAT)
In Stock and Available for Delivery

RSL Sher-Crete BU

Cementitious pumped industrial underlayment base screed. Recommended as a base screed for Sher-Crete BU or SW resinous seal coats and toppings, suitable for resin flooring toppings and underfloor heating systems.Ideal for overcoating with Sherwin-Williams Resuflor, Resudeck, Resupen, Elladur and SofTop resin coating systems Fast...

Price £25.88 (ex. VAT)
In Stock and Available for Delivery

Need Help?

Need Help?

A good concrete floor screed design will include strength, bonding and compatibility with what is to be used over it – whether that be another covering or simply left as a wearing surface. If you require any technical or application support, give Rawlins Paints a call on 0113 245 5450. The traffic and load expectations of the floor will need to be taken into consideration prior to the floor screed’s application to ensure that the strength of the screed will be built to match the required specification.

The Differences Between Concrete and Screed

A key difference between screeds and concrete (which can have the same material ingredients) is that a screed is usually only as a top layer or finish to a concrete base. There is also a different texture between concrete and screed, with concrete being more coarse, rough and containing more aggregate and stones in with the sand and cement. Both floor screeds and concrete can be painted with a heavy duty concrete floor paint, also available at Rawlins Paints. Screed has a smoother texture than concrete, and is more like a mortar with its smaller aggregate components. Once laid, this makes for a much smoother and finer grain appearance than concrete.

How to Screed a Floor

At Rawlins Paints, our focus is on commercial and industrial properties, whose floor space far exceeds domestic settings. Professional applicators with experience of laying and installing these self-levelling floor screeds and compounds, will most likely have adapted their application methods to include things they find helpful to speed up the process and provide a better overall finish. For first time users and professionals alike, each resurfacing screed typically comes with an application guide, and Rawlins Paints’ blog also covers many application techniques for industrial and commercial purposes.

Sika Resurfacing Floor Screeds

SikaCem

SikaCem 810 is a modified SBR polymer admixture that is a patented latex combination of SBR, silica fume and superplasticiser. It is used for bonding and improving mortars, renders and screeds.

Sika Monotop

Sika MonoTop 620 is a one component cementitious polymer modified mortar, which can be used as a concrete pore sealer, levelling mortar and smoothing coat to repair minor defects on an internal or external concrete floor.

Sikagard

Sikagard 720 EpoCem is a 3-part cement and epoxy combination micro mortar for surface sealing that is a cementitious, thixotropic, fine textured mortar perfect for the levelling and finishing of damaged concrete, mortar or stone surfaces.

Sikafloor PurCem Range

Multi-component, resin rich, smooth coloured polyurethane modified, cement and aggregate screeds suitable for floors subject to heavy loading, abrasion and chemical exposure.

Rust-Oleum Speed Screed

Rough concrete floors can be transformed rapidly and easily with this self-smoothing, hard wearing material designed to meet the demands of industrial use. Rust-Oleum Speed Screed gives a mid grey, non-dusting, slip-resistant surface that requires no further treatment before use.