Filter By

CLEARANCE - Axalta ViterClad 50 Finish

Axalta ViterClad 50 Finish is a two pack recoatable polyurethane finish specially formulated for the maintenance and repainting of architectural cladding, especially recommended for the maintenance of Corus Colorcoat HP200 and HPS200 cladding. Available in 350+ colours Expected system lifetime up to 15 years (depending on exposed...

Price £55.81 Regular price £111.63
In stock

CLEARANCE - Bradite One Can

Bradite One Can is a quick-drying primer/finish coat in one can, with excellent adhesion, stain blocking and anti-corrosive properties. Suitable for use over most properly cleaned and prepared commercial wood, uPVC, glass, plastic and metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Available in...

Price £9.99 Regular price £19.95
In stock

CLEARANCE - Bradite Industrial Degreaser

Bradite Industrial Degreaser is an aqueous alkaline low foaming detergent used for degreasing contaminated surfaces prior to painting. Ideally suited for degreasing oily or soiled surfaces and for removing road dirt. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Biodegradable in general use...

Price £5.69 Regular price £11.38
In stock

CLEARANCE - Bradite Pre-Treat Galvanised Steel

Bradite Pre-Treat Galvanised Steel is a mordent solution used as a pre-treatment for galvanised steel, to provide a key for all paint primers and finishes. Easy to use solution; clean up with water after use. Advantages British gas reference BGC MO1. Department of Transport Item NO:155. ISO 9001:2008 ISO 140001:2004 1 x 1l available...

Price £5.25 Regular price £10.51
In stock
All sale products

Need Help?

Road Studs

There are 6 products.

Showing 1-6 of 6 item(s)

Active filters

Stimsonite 980 Road Studs

Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.

Price £195.21
In stock

Stimsonite 381/C80 Inset Road Studs

Stimsonite 381/C80 Inset Road Studs are a two way snow-ploughable road markers made from hardened cast iron housings designed to withstand all climate conditions that can provide retro-reflectivity from linear distances over 300m away and retain specific intensity values above 150 mcd/lux/m².

Price £10.50
In stock

Ennis-Flint Prismo Temporary Road Studs

Ennis-Flint Prismo Temporary Road Studs are BSEN 1463 compliant with self adhesive stick-on pads for easy application. The stud body is fluorescent to give excellent day and night time visibility. Ennis-Flint Prismo Temporary Road Studs are used on contra flows and areas within road works to designate lanes.

Price £1.40
In stock

Ennis-Flint Prismo II Road Studs

Ennis-Flint Prismo II Road Studs are aluminium reflecting road studs which are resistant to the corrosive effects of salt and grit and fully compliant with BS EN 1463-2:2000 (S1, R1). Designed for easy installation and stability they are fixed to the road surface with an anti-twist stem and suitable for centre line, edge marking or lane...

Price £8.64
In stock

Ennis-Flint Bundy Pad Adhesive

Ennis-Flint Bundy Pad Adhesive securely adheres plastic road studs for horizontal paved surfaces of roadways and parking bays, liquifying to provide a bond that is suitable for the markers lifetime. Bundy Pad Adhesive is non-toxic and is ideal for maintenance applications as the ease of installation offers quick repairs for road studs without...

Price £96.23
In stock

Stimsonite Road Stud Adhesive

Stimsonite Road Stud Adhesive is a high performance hot-melt modified bituminous product used to bond Stimsonite road studs to both asphalt and concrete in temperate climates. Stimsonite Road Stud Adhesive exhibits improved flexibility at low temperatures, while retaining good flow resistance. When melted it forms a highly adhesive...

Price £36.26
In stock