Ronacrete are one of the few successful family-run independent British companies in the building materials industry, and are a member of several trade bodies including The Concrete Society, FeRFA and BALI. Its products are widely specified with a long list of case studies and often provide the solution to a problem others cannot overcome. Rawlins Paints are official Uk suppliers of Ronacrete's full range of products, including:
Concrete repair and waterproofing
Resin bound and bonded surfacing
Screeds and flooring
Ronacrete's specialised range of products are designed for installation by expert contractors and is deliberately limited to allow for full support on each material. Contact Rawlins Technical on 0113 2455450 (option 2) or send a message to [email protected] for free advice on specification and application.
A liquid applied surface damp proof membrane designed to reduce the passage of water vapour and allow the adhesion of thin bonded and fast drying screeds to concrete which is either not fully dry or does not have a functioning DPM.Ronacrete Monoprufe DPM conforms to BS EN 1504-2 Water-based membrane system - reduces water and water vapour...
Decorative, water-based, anti-carbonation coating used as a protective and decorative coating for new, maintenance and refurbishment work and can be applied to most traditional building surfaces including concrete, repair mortar, render and masonry after preparation.Ronacrete RonaBond Anti-Carbonation Coating WB has excellent CO2...
High build, elastomeric waterproof anti-carbonation façade coating, with permanent flexibility and excellent self-cleaning properties.Has excellent CO2 resistance Dynamic crack accommodation up to 2mm Water based matt finish 1-3 coats using roller or airless spray application Available in white - colours available on request Case...
Coating designed to improve equivalent concrete cover to reinforcement. A 2mm layer provides 150mm equivalent concrete cover providing corrosion protection to steel reinforcement, thus extending the life of the concrete.Protective coating for concrete Elastic, covers fine cracks Waterproof, easy to apply, and touch dry is as little as 30...
High build concrete repair mortar for vertical and overhead surfaces where ease of application is as important as strength.Conforms to BS EN 1504-3 - high build repairs to 75mm, application from 6mm Pre-packed formulations offer assurance of consistent high performance Use for structural concrete repair, dubbing out - excellent for thick...
High build concrete repair mortar for vertical and overhead surfaces where ease of application is as important as strength.Rapid set and strength gain - high build repairs to 75mm Low temperature use - waterproof and frost proof Smooth surface finish prior to application of protective/decorative coating Use for structural concrete...
Pre-packed lightweight concrete repair mortar for repairing concrete on vertical and overhead surfaces where ease of application is as important as high strength. Bonds well to concrete, steel and other building surfaces, offering long term performance and protection to structures.Conforms to BS EN 1504-3 - high build repairs to 75mm,...
Pre-packed polymer modified concrete repair mortar used to repair and replace concrete damaged as a result of spalling through reinforcement corrosion, freeze/thaw cycling, impact or other damage.Conforms to BS EN 1504-3 and is approved by WRC for use in contact with potable water Excellent long term durability - will last as long as the...
Prepacked flowable repair concrete for pumping or pouring, used for reinstatement of structural elements such as columns and beams. For when hand application of mortars is impractical or undesirable.Conforms to BS EN 1504-3 High strength flowable micro concrete - free flows in to shuttering and formwork Shrinkage compensated - protects...
Polymer modified, pre-packed fairing coat. Applied as a skim coat in thicknesses up to 3mm to provide a smooth, hard finish to damaged, blemished and repaired concrete surfaces.Conforms to BS EN 1504-2 1mm - 3mm application thickness Fair-faced finish on walls and soffits Covers minor blemishes Apply by trowel Apply prior to...
Polymer modified, pre-packed fairing coat. Applied as a skim coat in thicknesses up to 3mm to provide a smooth, hard finish to damaged, blemished and repaired concrete surfaces.Ronacrete RonaBond FC for Prison Cells is used as a levelling mortar prior to the application of protective coatings and paints Can also be used to give a "harder...
A two pack solvent free, liquid applied surface damp proof membrane designed to reduce the passage of water vapour.Reduces water and water vapour permeability Can be applied on substrates with a Relative Humidity up to 97% Excellent adhesion to concretes and screeds Reduces project timescale; less time waiting for screed and concrete...