The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. ADVANTAGES Clear or stained finish Tough/Durable finish UV and wear protection (Matt & Satin) Enhances natural beauty
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Roof Fire Barriers
Roof fires are more likely in terraced and semi-detached properties since fire can move through loft spaces filled with combustible materials such as boxes and plastics.
Help prevent fire from spreading across roofs and in loft voids with fire breaks for membranes and internal fire barriers from Envirograf, which are ideal for commercial and industrial buildings that house several companies under one roof.
Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.
For clarification on minimum requirements before buying one of our fire-stopping products, please review the information provided in the 'DATASHEETS' tab on the product in question. A written specification should be obtained from our Technical Department for your project prior to use to ensure the product will be suitable.
A non-pourous Fire Break Membrane for roofs, preventing spread of fire between adjoining properties for up to 60 minutes. Waterproof Fits below roofing profiles Other sizes can be made to order, for wider or narrower gaps between trusses each side of partition walls. Contact our sales team on 0113 245 5450 for more information.
An Internal Roof Fire Break Barrier to help prevent spread of fire through roof spaces, such as semi-detached and terraced housing. Easy to install from inside loft spaces, by 1 or 2 people. Economical Supplied with adhesive, fixing battens, FB70 barrier cloth and fire-proof sponge Priced per linear metre
Firetherm 30/90, providing a 30 or 90-minute fire and smoke barrier in roof voids and large volume areas. Can also be used to provide a fire and smoke barrier in suspended ceiling applications and raised floors. Click to see size references below for 30 or 90-minute fire barriers Lightweight for easy installation to steel or timber (click...