- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Roof Scrim and Tape
Roof Scrim and Tape provide essential reinforcement for flat and pitched surfaces, sealing overlaps, joints, cracks, and gaps in roofing systems. Designed to work with liquid membranes and other building supplies, these materials help strengthen weak points and prevent water ingress across vulnerable areas. Tapes are often used around skylights, vents, and flashing, while scrim fabric is embedded into coatings to improve tensile strength.
Rust-Oleum Mathys Noxyde Tape
Single pack self-adhesive butyl rubber tape. For reinforcing overlaps on metal cladding roof and wall panels. Excellent adhesive properties with high heat stability and adhesion at low temperatures. Certified with reliable performance in extreme temperatures and environmental conditions.
Britannia Reinforcing Scrim
Britannia Reinforcing Scrim is a polyester-based mesh that can be used to reinforce the following: roof fixings, cracks, splits, holes and joints in asbestos gutters and sheeting, rooflights, metal, bituminous felts/coatings and asphalt surfaces, felted surfaces, single ply and fibreglass roofs and wood. Used as a reinforcement with...
Bullet Roof Reinforcement Tape
100mm x 10m reinforcement tape. Compatible with Bullet Mono and Rapid Range system.
Watco Roofite Reinforcing Scrim
For bridging holes and gaps in roofs before applying Watco Roofite/Roofite Solar Reflective. Part of the Roofite range - a range of products to repair, protect and waterproof roofs Can cut to size, used to bridge larger gaps and holes For exterior use
Cromar HydroSil HD Reinforcement Roll
A heavy‐duty stitch bonded high performance fabric for use in cold applied restoration roofing and roof maintenance systems. It comes with lay lines for one and two ply roof systems. It is ideal as the reinforcing component in cold process roofing and repair with water‐based asphalt emulsion, acrylic coating, solvent type coatings, or mastics....
Sika Flexitape Heavy Duty
Sika Flexitape Heavy Duty is used for additional partial reinforcement under Sika Reemat Premium on cracks/joints subject to movements of >15% (expansion joints) and to bridge smaller seams between different substrates. Expansion joints require special advice with a release adhesive tape. Please Note: 50m x 150mm Roll is only available on...
Sika MultiSeal
Sika MultiSeal is a self-adhesive sealing tape made from bitumen rubber compound, protected by a reinforced aluminium film. Use for general repair to existing flashing, roofs including sheet metal work, facades, broken roof tiles, leaking gutters, duct work, sealing projections through the roof. Features and Benefits Very easy to apply...
Cromar Cromapol Reinforcement Scrim
Cromar Cromapol Reinforcement Scrim is a synthetic fibre fabric used when extra reinforcement is required, for example cracks in corrugated asbestos, gutters, splits in felt and asphalt roofing. Provides significantly greater elongation, recovery and freedom from stress breakage Leno weave gives stability to the fabric, eliminating the...
Tor Elastascrim BT
Tor Elastascrim BT is a non-flammable, butyl, rubber based, self-adhesive tape with a polymeric textile reinforcement protection fleece. Used for the bridging of roof sheet lap joints, stabilised cracks, movement joints, small gaps, abutment details etc, prior to application of Tor roof waterproofing and protective coating systems etc. Part...
APOC Heavy Duty All-Purpose Incredible Tape
APOC Fleece-Top Heavy Duty All-Purpose Incredible Tape is a versatile, heavy-duty, easy-to-use leak repair, reinforcement and construction tape for residential, commercial and industrial applications that forms a tough and durable repair with a lifetime of dependability. Immediately seals materials, stopping air, moisture and water...
Tor Elastascrim FT
Tor Elastascrim FT (SS6000140) is a non-flammable, semi-elastic, putty-like butyl rubber based strip encapsulant/sealant. Supplied in roll form on siliconised paper release backing for use as a formable pre-coat encapsulant and sealant over roof sheet bolts etc. Also usable as a lap joint gap filler/sealer on sheeted (profile metal,...
Kovertek TekGuard TekShield Tape
KoverTek TekGuard/TekShield Tape is a high-quality woven tape designed for the use of localised reinforcement of OSB3 cut panels when tongue and groove panels are not in use. TekGuard/TekShield Woven Tape is used and included in Kovertek TekShield GRP Roof Kits and KoverTek TekGuard Flexi-GRP Fire Resistant Kits.
Cromar Acrypol+ Scrim
Cromar Acrypol+ Scrim is an ancillary product for use alongside Cromar Acrypol+ Waterproof Roof Coating. More Information Delivery Info
Need Help?
Need Help?
Roof Scrim and Tape for Reinforcement and Repairs
Used in conjunction with primers, sealants and coatings, roof scrim and tape support a wide variety of building supplies during application. These products reinforce seams, edges, upstands and detail work, where movement or cracking is most likely. Applied as part of a wet-on-wet system, they bond well with solvent-based, water-based, and polyurethane coatings. Some variants can even be embedded in damp conditions.
This category complements roof paints by providing structural support beneath the topcoat. Ideal for use in areas of standing water, around gutters and upstands, or over worn patches, scrim and tape help extend the life of roofing membranes. Options include self-adhesive tapes, polyester scrims, fleece bands, and compatible glass fibre meshes.
Roof Scrim and Tape FAQs
What substrates can roof scrim and tape be used on?
They can be used on most common roof surfaces, including asphalt, bitumen, metal, concrete, and GRP. Compatibility with the topcoat or membrane is essential, so always check product guidance.
Do scrims or tapes provide waterproofing on their own?
No, they are not standalone waterproofing systems. Scrims and tapes must be used in conjunction with suitable liquid-applied membranes or coatings.
Can scrim and tape be used in cold or damp conditions?
Some tapes and scrims are suitable for damp surfaces or low temperatures, but always check the specific product's data sheet.
How are scrims and tapes applied?
Typically, they are laid directly into the base coat of a liquid membrane while still wet, ensuring full saturation and adhesion.