A silicone additive for Selemix solventborne cellulose, polyurethane and fast dry synthetic topcoats to achieve attractive Hammer Effect finishes.For use with:Selemix 7-610 and 7-611 Fast Dry Synthetic Topcoats Selemix 1K Cellulose Topcoats 7-510 Polyurethane Topcoat Selemix Direct Pro High Gloss (first coat must be sprayed without...
Drier additive for Selemix 7-649 1K Extra Fast Dry Topcoat (added in colour mix*).Drier for 1K Extra Fast Drying Synthetic Binder For Professional Use Only*Please note: This product must be added to the relevant topcoat at the colour mix stage - please contact our Technical Department before placing an order on 0113 2455450 (option 2)...
Fine and coarse polyethylene powder paint additives. Creates a uniform finely textured surface with good abrasion resistance.Compatible with all Selemix System 1K and 2K topcoats without any impact on colour and on drying process They are also compatible with Selemix 8-110/1 Waterborne Topcoats For Industrial Use OnlyPlease note: The...
An additive which can be added to Selemix 2K Polyurethane or Acrylic Topcoats in order to help eliminate foaming during application.Foaming can result from high pressure spray application (airless or air-assisted airless spray), which can cause pinholes and a loss of gloss in the final finish For Professional Use OnlyMore Information...
An additive which can be added to Selemix 1K Synthetic Primers and Topcoats in order to improve the brushing capabilities. The additive extends the open time and gives more flow to help eliminate brush marks.It can be used in Selemix 7-610, 7-611, and 7-630 Topcoats, and 7-810 and 7-820 Primers. For Industrial Use OnlyMore Information...
A 2K waterborne, acrylic topcoat, suitable for use on primed or painted surfaces exposed to weathering, mechanical and chemical stress, for both interior and exterior use. Available in High Gloss (8-110) and Matt (8-111). Fast Curing version available here.Excellent gloss and colour retention and excellent hardness Can be used over...
A fast-curing 2K waterborne, acrylic topcoat, suitable for use on primed or painted surfaces exposed to weathering, mechanical and chemical stress, for both interior and exterior use. Available in High Gloss (8-110) and Matt (8-111). Standard Curing version available here.Excellent gloss and colour retention and excellent hardness Can be...
For use with selected Selemix Waterbased products including Selemix 8-110/8-111 2K WB Acrylic Topcoat/DTM Finish.Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use OnlyMore Information Delivery Info
For use with selected Selemix Waterbased products including Selemix 8-110/8-111 2K WB Acrylic Topcoat/DTM Finish.Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Industrial Use OnlyMore Information Delivery Info
2K waterborne, acrylic coating, with 6,700+ colours for direct application to well-prepared steel, galvanized steel, phosphate steel, or aluminium surfaces exposed to weathering, mechanical and chemical stress, for both interior and exterior use. Available in High Gloss (8-110) and Matt (8-111). Fast Curing version available here.Excellent...
2K fast curing, waterborne, acrylic coating with 6,700+ colours for direct application to well-prepared steel, galvanised steel, phosphate steel, or aluminium surfaces exposed to weathering, mechanical and chemical stress, for both interior and exterior use. Available in High Gloss (8-110) and Matt (8-111). Standard curing version available...
A tintable two component waterborne epoxy primer designed for aluminium, bare steel and galvanised steel surfaces, in 6,700+ colours. It is suitable for use in moderately aggressive environments, and it gives good resistance to water and solvents and good resistance to abrasion.For general industrial painting where a low VOC or a...
The Selemix range covers a wide variety of suitable uses across industrial segments - including agricultural, ACE, construction, earthmoving equipment, containers, cabins, generators, storage units, machinery, signage, metal fabrication and more.
Individual Selemix components (Bases & Hardeners) are available for purchase. Hardeners are listed separately, Bases are available for purchase individually on the main product pages.