- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Sherwin Williams Paints
Sherwin-Williams' industrial coatings, available through Rawlins Paints, include durable floor paints designed for heavy-duty use in warehouses, workshops, and manufacturing plants. These hard-wearing finishes are formulated for concrete and masonry and provide excellent resistance to abrasion, traffic, and chemicals. For projects involving steel or galvanised surfaces, their metal paints deliver long-term corrosion protection and outstanding adhesion on internal and external substrates.
Sherwin-Williams acquired Leighs Paints in 2011, combining over 150 years of UK coating innovation with global manufacturing strength. Now trading as Sherwin-Williams Protective & Marine Coatings, the company supplies high-performance systems to infrastructure, construction, and specialist engineering sectors. Rawlins Paints distributes these coatings nationwide, offering technical support for specification, preparation, and application across a wide range of industrial settings.
Sherwin-Williams Macropoxy 400
Formerly known as Sherwin-Williams Macropoxy C400V3, a multi-functional epoxy zinc phosphate coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard (London) for corrosion protection. Recommended uses include: Buildings, car parks Petrochemical plants, breweries,...
Sherwin-Williams Acrolon C137V2
A high performance, fast drying acrylic urethane gloss finish in 450+ colours for use where long term exterior gloss and colour retention characteristics are required. Suitable for use as a final coat(s) in conjunction with epoxy or polyurethane based protective systems for new construction or maintenance purposes Please note: Also...
Sherwin-Williams Firetex FX1003
Single pack, thin film intumescent coating, designed for site application by airless spray, to provide fire resistance for up to 120 minutes on structural steel. Certificate Application
Sherwin-Williams Firetex M71V2
A sheen decorative topcoat in 450+ colours for the Firetex range of single pack intumescent coatings and also provides protection when used in internal semi-controlled conditions where condensation may occur (Category C2 as defined in ISO 12944-2). Please note: Also available in Ready Mixed Aluminium subject to an extended lead time of 28...
Sherwin-Williams Firetex FX5062
Water-based one-pack TCEP free thin film intumescent coating, specifically designed for airless spray application to provide fire resistance for periods up to 90 mins on structural steel. Firetex FX5062 has been Certifire Approved. Note: application schedule required before using - click to see more information below. Certificate Application...
Sherwin-Williams Macropoxy M902
Sherwin-Williams Macropoxy M902 (formerly known as Epigrip M902) is a low temperature curing hi-build 2-pack epoxy brushing aluminium primer coating capable of curing down to 0°C. For brush application onto hand or mechanically prepared surfaces and/or damp gingered surfaces giving excellent wetting and adhesion characteristics - see...
Sherwin-Williams Acrolon 7300
Sherwin-Williams Acrolon 7300 is a high solids, tin free polyurethane, with fast drying and high gloss attributes. Acrolon 7300 can suitable for use where long term exterior gloss and colour retention characteristics are required. Gloss levels: Gloss: 70%+ Semi-Gloss - approx. 40% Available in 450+ colours Professional use only -...
Sherwin-Williams Firetex FX5090
Water based TCEP free thin film intumescent coating, designed for application by airless spray to provide fire resistance for periods of up to 120 minutes on structural steel. Certificate Application
Sherwin-Williams Macropoxy K267
Sherwin-Williams Macropoxy K267 (formerly known as Epigrip K267/Transgard TG121) is a two-pack, pigmented with micaceous iron oxide, designed as an intermediate coat in conjuction with Macropoxy high performance primers.
Sherwin-Williams Acrolon C237
Sherwin-Williams Acrolon C237 (formerly Resistex C237) is a high performance fast drying acrylic urethane sheen finish for use where long term exterior colour retention characteristics are required. It is suitable for use as final coat or coats in conjunction with epoxy or polyurethane based protective systems for new construction or...
Sherwin-Williams Macropoxy M905
Sherwin-Williams Macropoxy M905 (formerly known as Epigrip M905) is a low temperature curing, two pack epoxy high build undercoat, capable of curing down to 0°C. For application onto suitably primed surfaces, as an undercoat for use under suitable high performance finishes, where low temperature curing is required Recommended for rapid...
Sherwin-Williams FIRETEX FX9500
2-pack exterior durable intumescent offering 60, 90 and 120 minute fire protection both internally and externally without topcoat, which can be applied directly onto blast cleaned steel. Suitable for application in-shop and on site. Ultra durable - suitable for use in a C5-I environment, as defined in ISO 12944-2:1998 with appropriate...
Sherwin-Williams Cleanser/Thinner No.5
Sherwin-Williams Cleanser/Thinner No.5 is a specially formulated blend of solvents designed to mix with its compatible Sherwin-Williams products to create an optimal consistency for application whether it be for Brush, Roller or Spray. It can also be used for cleaning of surfaces and application equipment. Specially formulated blend of...
Sherwin-Williams Cleanser/Thinner No.2
Sherwin-Williams Cleanser/Thinner No.2 is a specially formulated blend of solvents designed to mix with its compatible Sherwin-Williams products to create an optimal consistency for application whether it be for Brush, Roller or Spray. It can also be used for cleaning of surfaces and application equipment.
Sherwin-Williams Degreaser W500
Sherwin-Williams Degreaser W500, formerly known as Envirogard W500 and the recommended alternative to RSL Fats, Oils and Grease Remover, is a water based degreasing agent based on a blend of plant derived surfactants free from caustic alkalis, silicates, harmful solvents, phosphates or aggressive biocides. Degreaser W500 is suitable for...
Sherwin-Williams Firetex M72
Solvent based intumescent mastic coating, used for the repair of small areas of mechanical damage to Firetex range of intumescent coatings. Certificate Application
Sherwin-Williams Cleanser/Thinner No.15
Sherwin-Williams Cleanser/Thinner No.15 is a specially formulated blend of solvents designed to mix with its compatible Sherwin-Williams products to create an optimal consistency for application whether it be for Brush, Roller or Spray. It can also be used for cleaning of surfaces and application equipment.
Sherwin-Williams Macropoxy L425
Sherwin-Williams Macropoxy L425 is a two-pack epoxy zinc phosphate primer to use as anti-corrosive protection of carbon steel surfaces prepared by abrasive blast cleaning. Recommended Systems Macropoxy Dura-plate Zinc Clad Epoxy Primers Zinc Clad Epoxy Buildcoats
Sherwin-Williams Mordant Wash L703
Sherwin-Williams Mordant Wash L703 (formerly known as Leighs L703/Transgard TG155) is a blue mordant solution for application onto galvanized surfaces as a chemical pre-treatment to improve the adhesion of subsequent paint systems.
Sherwin-Williams Macropoxy L574
Sherwin-Williams Macropoxy L574 (formerly known as Metagard L574) is a two-pack temporary protective primer for steel surfaces prepared by abrasive blast cleaning.
Sherwin-Williams Kem-Kromik 489
Ken-Kromik 489 (formerly known as Sherwin Williams L489 and as Leighs L489) is a highly protective alkyd anticorrosive primer pigmented with minimum 40% zinc phosphate, used as an anticorrosive spraying or brushing primer for steel.
Sherwin-Williams Kem-Kromik 530
Kem-Kromik 530 (formerly known as Sherwin-Williams C530 or as Leighs C530) is a high quality, quick drying, lead free single pack alkyd gloss finish for interior and exterior surfaces, ideally suited for equipment manufacturers and for structural steelwork. Kem-Kromik 530 possesses excellent gloss and colour retention and outstanding...
Sherwin-Williams Firetex FX2003
Sherwin-Williams Firetex FX2003 is single pack thin film intumescent coating, designed for in-shop application by airless spray to provide fire resistance for up to 120 minutes on structural steel. Certificate Application
Sherwin-Williams Dura-Plate 301W
Sherwin-Williams Dura-Plate 301W is a low temperature curing, surface and humidity tolerant two-pack modified epoxy. It can be applied without dew point restrictions and over wet steel surfaces. Approved for Network Rail maintenance specifications, it can be used for both immersion and above the waterline service in marine, offshore,...
Sherwin-Williams Macropoxy L524
Sherwin-Williams Macropoxy L524 (formerly known as Epigrip L524) is a high build 2-pack modified epoxy coating for immersive protection in salt water, fresh water and crude oil. Recommended Uses Protection of ships bottoms and cargo tanks Submerged/splash zone areas of marine structures Jetties External protection of buried and other...
Sherwin-Williams Macropoxy C425V2
Sherwin-Williams Macropoxy C425V2 (formerly Epigrip C425V2) is a high build 2-pack epoxy zinc phosphate primer/buildcoat to provide anti-corrosive protection of carbon steel surfaces prepared by abrasive blast cleaning. Network Rail and NORSOK approved, ideal for use in internal/external exposed conditions including offshore, petrochemical and...
Sherwin-Williams Macropoxy M922M
Sherwin-Williams Macropoxy M922M (formerly Epigrip M922M) is designed to withstand the most aggressive environments whilst delivering exceptional protection to steel structures. A high solids epoxy mastic, with excellent anti-corrosive properties, Macropoxy M922M provides an ideal solution for maintenance and new build projects where steelwork...
Sherwin-Williams Macropoxy M922
Sherwin-Williams Macropoxy M922 (formerly Epigrip M922) is a high solids, 2-pack glass flake epoxy pigmented with micronised glass flake and anti-corrosives to provide anti-corrosive protection of blast cleaned steel and cathodically protected steel. Macropoxy M922 possess excellent abrasion resistance and has excellent resistance to immersion...
Sherwin-Williams Epo-Phen FF
Sherwin-Williams Epo-Phen FF coating is a flake-filled (MIO) amine cured epoxy phenolic novolac formulated for use under thermal insulation at elevated or cryogenic temperatures and for immersion service in water and hydrocarbons such as gasoline, fuel oil, and diesel fuel. Temperature resistant to 218°C (425°F), constant; 232°C (450°F)...
Sherwin-Williams Macropoxy M262
Sherwin-Williams Macropoxy M262 (formerly Epigrip M262) is a 2-pack epoxy high build gloss finish for interior or exterior use in conjunction with appropriate primers and undercoats. It is suitable for application on concrete floors. Available in 400+ colours, including RAL and BS Order a Colour Sample
Sherwin-Williams Macropoxy M630V2
Water-based, 2-pack epoxy gloss finish for interior use only, recommended for application to suitably sealed masonry walls, floors and ceilings. It may also be used on new and old concrete as well as previously painted surfaces and suitably primed steel. Readily-available in White, BS 00A01 and BS 14C39 Also available in a range of...
Sherwin-Williams Firetex FX5120
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. A water based TCEP free thin film intumescent coating designed to provide fire resistance for periods of up to 120 minutes on structural steel....
Sherwin-Williams Kem-Kromik 155
Kem-Kromik M155 (formerly known as Sherwin-Williams M155 or Leighs M155) is a quick drying alkyd anticorrosive protective finish pigmented with zinc phosphate, used for protection of steel where speed of drying is important. Can be applied by airless spray or roller, using a brush only for small areas or touching up. Please note: Light Grey...
Need Help?
Need Help?
Sherwin-Williams Coatings
When Sherwin-Williams acquired Leighs Paints in 2011, it brought together decades of global leadership with a British company known for pioneering protective coating systems since 1860. That legacy continues under the Sherwin-Williams Protective & Marine Coatings name, where innovation meets performance across some of the world’s most demanding industries.
One of the key sectors served is marine protection. Sherwin-Williams’ range of marine paints includes anti-corrosion coatings for hulls, superstructures, docks, and offshore rigs. These systems resist saltwater immersion, tidal abrasion, and UV degradation, making them essential for long-term durability in harsh marine environments. Their performance is proven in global shipping and offshore oil and gas operations.
Sherwin-Williams is also a major manufacturer of passive fire protection. Its FIRETEX range of fire retardant paints includes intumescent coatings for steel structures, meeting UK fire regulations in commercial and industrial buildings. These coatings expand under high heat, insulating steel against structural failure during a fire, and are available for both interior and exterior use.
From corrosion-resistant metal primers to direct-to-metal finishes and chemical-resistant linings, Rawlins Paints offers the full Sherwin-Williams range across the UK. These coatings are backed by technical data, specification support, and site-specific guidance to ensure reliable application and long-term performance, whether it’s onshore, offshore, or in transit.
Sherwin-Williams FAQs
Are Sherwin-Williams floor paints suitable for cold weather application?
Yes, several Sherwin-Williams floor systems can be applied in colder temperatures, including specialist low-cure options. These are useful for unheated warehouses, garages, and outdoor slabs. Always confirm application temperature limits in the technical data sheet before starting.
Can Sherwin-Williams metal primers be applied over rust?
Certain primers are formulated for application to hand-prepared, rusty metal surfaces. These encapsulate rust and provide adhesion where blasting isn't possible. However, the surface must still be firm, dry, and free from oil, grease, or loose material.
Do Sherwin-Williams marine coatings resist saltwater and UV?
Yes. Their marine coatings are designed for prolonged saltwater immersion and include UV-resistant finishes for deck and topside exposure. These systems offer extended life in harsh marine environments, reducing maintenance intervals and protecting structural integrity.
Is FIRETEX suitable for interior and exterior steel structures?
FIRETEX includes systems for both indoor and outdoor steel. External versions are tested for weather resistance and can be overcoated with decorative finishes. Ensure you select the correct product for the steel location and fire rating requirements.
What are the benefits of using direct-to-metal (DTM) coatings?
DTM coatings combine priming and finishing in one coat, saving time and labour. They are especially useful on prepared galvanised, mild steel, and aluminium where multi-coat systems are impractical. These coatings also offer fast drying and corrosion resistance.
Where can I get product support for Sherwin-Williams coatings?
Product support is available from Rawlins Paints, including help with technical data, surface preparation, compatibility, and compliance. Contact the team for recommendations specific to your site conditions, application method, and performance requirements.