The Sika-1 Pre-Bagged Waterproofing System fully protects above and below ground structures from water ingress, eliminating the need for the maintenance of any internal drainage or pumping system associated with some other solutions.
Suitable for virtually any application, the system provides an effective water-tight seal for structures that must keep water out: Basements, underground car parks, swimming pools, water tanks, etc. - structures that must retain water.
Sika 1 Waterproofer Liquid Admixture is an aqueous solution containing complex colloidal silicates. In the presence of water these swell and block the capillaries and pores in the applied sand/cement renders, screeds and mortar to provide an effective barrier against the transmission of liquid water.
Features and Benefits
Proven for more...
SikaCem Desactivant 4-6 is an aqueous phase surface retarder for concrete with very high curing performance, which deactivates to a depth of 4–6 mm.
Can be used for public and private external floor surfaces, such as pedestrian zones, driveways, sidewalks, housing development road systems, patios, swimming pool surrounds, extruded concrete...
Sika 1 Pre-Bagged Spritz & Bonding Coat Mortar is part of the Sika 1 Pre-Bagged Structural Waterproofing System and is the first layer of the render or screed system. These special mortars are pre-bagged kiln dried blends of specially graded aggregates and cements, with waterproofing admixtures, packaged in 4 grades at the appropriate mix...
Sika 1 Pre-Bagged Render Mortar is part of the Sika 1 Pre-Bagged Structural Waterproofing System and is the second layer of the render system. These special mortars are pre-bagged kiln dried blends of specially graded aggregates and cements, with waterproofing admixtures, packaged in 4 grades at the appropriate mix ratios for optimum...
Sika 1 Pre-Bagged Finishing Mortar is part of the Sika 1 Pre-Bagged Structural Waterproofing System and is the third layer of the render system. These special mortars are pre-bagged kiln dried blends of specially graded aggregates and cements, with waterproofing admixtures, packaged in 4 grades at the appropriate mix ratios for optimum...
Sika 1 Pre-Bagged Screed Mortar is part of the Sika 1 Pre-Bagged Structural Waterproofing System and is the third layer of the floor screed system. These special mortars are pre-bagged kiln dried blends of specially graded aggregates and cements, with waterproofing admixtures, packaged in 4 grades at the appropriate mix ratios for optimum...
This system can be combined with a range of complementary products for a comprehensive watertight solution. The prebagged waterproofing range consists of a render system for use on walls and overhead and a screed system for use on the floor.
Advantages
Withstand high water pressures
Bonds to the substrate
Hard wearing surface
No ongoing maintenance
Follow contours of structures
100 year track record
Can be used to achieve Grades 1-3 according BS 8102- 2009
The basis of every concrete basement is a solid and sound concrete structure. Proper maintenance of the reinforced concrete structure is essential in order to guarantee a prolonged design life and to ensure the longevity of any waterproofing system.
This includes:
Protection of the steel reinforcement
Repair of damaged and deteriorated concrete
Protection of exposed concrete surfaces against mechanical, chemical and physical attacks
Strengthening of reinforced concrete structures which are too weak to carry the required load
Successful concrete refurbishment starts with a detailed condition survey to identify the root causes of degradation. After the assessment, the appropriate repair and protection strategy and repair works can be defined according to local standards and manufactured and tested in compliance with European Standard BS EN 1504.