Sherwin-Williams Acrolon C137V2 (formerly Resistex C137V2) is a high performance, fast drying acrylic urethane gloss finish for use where long term exterior gloss and colour retention characteristics are required. Acrolon C137V2 is suitable for use as a final coat(s) in conjunction with epoxy or polyurethane based protective systems for new...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:
Up to 90 minutes’ fire resistance
Can be overcoated with compatible decorative topcoat
Water-based
Low odour
Environmentally friendly
Cost effective for large projects
Certificate of supply available on request
Can be applied by brush,...
The ultimate performance shellac-based primer-sealer and stain killer for interior and spot exterior use. Offers unparalleled adhesion to glossy surfaces (including glass) without the need for scuff sanding and blocks stubborn and persistent stains.
Available in more than 90 colours from RAL and BS shades (1L, 2.5L, 5L only).
• Ultimate...
Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating:
For foot traffic, interior and exterior
Anti-slip additive is premixed in the coating
For use on old concrete (>2 yrs), metal and wood
Unique uniform appearance, high gloss
Touch dry: 6 hours, coverage: 8m² per litre
Available in...
The Sika CarboDur range is a high end, top of the range, selective group of products designed to banish structural damage for the foreseeable. These products can increase the load capacity if your structure is expected to take greater weights or the building is changing function, combat natural deterioration, repair earthquake, fire or vehicle related damage, improve fatigue resistance, reduce stress, and increase the overall resistance to natural disasters, impact or explosion.
Sika Carbodur has been used on some high profile projects which further cements their position as one of the top manufacturers on the market, including the re-strengthening of the District Line plates on the London Underground and the repair of the Penang Bridge in Malaysia after an accidental fire in 2010.
Sika CarboDur UHM (Ultra High Modulus) Plates are high performance, corrosion resistant carbon fibre plates manufactured to individual project dimensional specifications. When used in conjunction with the appropriate SikaDur structural epoxy adhesive, they form the Sika CarboDur Ultra High Modulus Plate System.
This product is available as...
Sika CarboDur S NSM are pultruded carbon fibre plates for structural strengthening as part of a Sika CarboDur system. Sika CarboDur plates are pultruded carbon fibre reinforced polymer (CFRP) laminates, designed for strengthening concrete, timber and masonry Sika CarboDur plates are bonded into slots as near surface mounted reinforcement using...
Sika CarboDur S Type plates are pultruded carbon fibre reinforced polymer (CFRP) laminates designed for strengthening concrete, timber and masonry structures as part of the Sika CarboDur System. Sika CarboDur plates are bonded onto the structure as externally bonded reinforcement using Sikadur 30 structural adhesive.
Sika CarboDur E plates are pultruded carbon fibre reinforced polymer (CFRP) laminates, designed for strengthening concrete, timber, masonry, steel and fibre reinforced polymer structures.
They are bonded onto the structure as externally bonded reinforcement using Sikadur 30 adhesive. Refer to the relevant Product Data Sheet for more detailed...
Sika CarboDur BC Rods are pultruded carbon fibre reinforced polymer (CFRP) laminates with a circular cross section, designed for strengthening concrete, timber and masonry.
This product is available as POA. Click here to email us for more information.
Features and Benefits
Non corroding
Very high strength
Invisible once installed, no...
Sika CarboDur M Type plates are pultruded carbon fibre reinforced polymer (CFRP) laminates designed for strengthening concrete, timber and masonry structures. They are bonded onto the structure as externally bonded reinforcement using Sikadur 30 structural adhesive.
Features and Benefits
Non corrosive
Very high strength
Excellent...
Open a Credit Agreement Trade Account at Rawlins Paints
To open a Credit Agreement Trade Account at Rawlins Paints, simply click on the link below to download a Account Application Form. Once filled in, please return the Application Form to [email protected]
Alongside standard Technical and Sales Support Rawlins Paints offers to its customers, Credit Agreement Trade Account members will also benefit from:
