Bradite HD Floor + Wall is a heavy-duty coating for walls and floors that is well-suited to factory and industrial environments that need ultra protection and an easy-to-clean surface. Also suitable for hygene-sensitive areas such as hospitals and more. Advantages Available in more than 350 colours in RAL & BS Water-based epoxy...
Bradite Rapid is a high performance single-pack moisture cure polyurethane floor coating that is ideal for commercial and industrial environments. Available in a large amount of colours, including RAL shades, the tough and flexible film will provide water and chemical resistance. Advantages Available in more than 350 colours in RAL &...
Bedec Multi Surface Paint is a renowned non-yellowing, water-based paint that resists flaking or peeling because of its outstanding flexibility. Low VOC Environmentally friendly Quick drying Micro-porous Low odour No primer/undercoat required Matt, satin or gloss Colour choice PLEASE SEE LONG DESCRIPTION FOR AVAILABLE QUANTITIES...
Sherwin-Williams Cleanser/Thinner No.5 is a specially formulated blend of solvents designed to mix with its compatible Sherwin-Williams products to create an optimal consistency for application whether it be for Brush, Roller or Spray. It can also be used for cleaning of surfaces and application equipment. 1 x 5l available - now 50% off
Sika Floor Paints
For industrial use, Sikafloor® paint systems can meet stringent demands of the most rigorous environments and floor dimensions, and has been used in some of the UK’s largest factories, installations and public attractions. Specially formulated for many types of industrial applications, Sikafloor paint systems can also be found internally and externally at commercial and domestic premises.
Rawlins Paints is one of the UK’s leading distributors of Sika products, including Sikafloor (Sikafloor Comfort and Sikafloor CureHard), Sika FloorJoint, waterproofing, concrete repair and quick fixing mortars, Sika MonoTop, and Sikagard.
Sikafloor CureHard 24 is a transparent surface hardener, dustproofer, sealing and curing compound for concrete. From the Sikafloor range, this is suitable for interior or exterior applications. Features and Benefits: Ready to use Easy to apply Improved chemical and abrasion resistance compared to untreated concrete Reduced dusting of...
Sikafloor CureHard WW is a one part, sodium silicate based clear liquid for curing fresh concrete. This Sikafloor paint is suitable for concrete slabs where no specific curing efficiency or standards are required and can be used for interior or exterior applications. Features and Benefits: Ready to use Easy to apply Reduced risk of...
Sikafloor ProSeal 90 is a curing and sealing compound for concrete floors. It is a one component Sikafloor product that has higher efficiency curing, sealing and hardening liquid and is suitable for exterior and interior application. Features and Benefits Suitable for exterior and interior application Excellent moisture retention; meets...
Sikafloor ProSeal Pro is a one part low odour clear acrylic resin polymer solution used to cure, harden and seal fresh or hardened concrete. Suitable for indoor or outdoor application. Click here for other Sikafloor products. Features and Benefits: One coat application Helps control dusting for both new and existing concrete floor...
Sikafloor ProSeal is a one component high performance curing, sealing and hardening compound for concrete floors from the Sikafloor product range - the original and the best! Features and Benefits Good moisture retention Helps control dusting Effectively cures and seals concrete surfaces in a single, economic operation Quick drying...
Sikafloor ProSeal W (from the full range) is a one component higher efficiency, water-based curing, sealing and hardening compound for concrete floors. A one part water dispersed acrylic emulsion to cure, harden and seal fresh or hardened concrete, and can be used in exterior and interior application. Features and Benefits: Excellent...
Sikafloor EpoCem Module is a solvent free, two-component, water based, epoxy resin primer for the Sika EpoCem range of products. It is suitable for use in hot and tropical climates. Excellent bonding promoter on cementitious and other mineral based substrates, supplied in pre-measured packs and can be applied to damp substrates.
Sikafloor 155 WN is a 2-part water based epoxy resin primer. Can be used as a primer and adhesion promoter on properly prepared concrete and cementious screeds, as well as a primer for other Sikafloor products. Features and Benefits Easy and fast to apply Especially suitable for highly absorbent substrates Water dispersed and odourless...
Sikafloor's 156 is a two part epoxy primer, levelling mortar and mortar screed. On its own it is a low viscosity, solvent free epoxy resin, that can be used for priming concrete substrates, cement screeds and epoxy mortars. Combined with Quartz Sands and Sika Extender T is becomes a levelling mortar and mortar screed. Features and Benefits:...
Sikafloor 161 is an economic two-part epoxy primer, levelling mortar and intermediate layer epoxy resin primer for Sikafloor systems and a binder for Sika levelling mortars and screeds. Features and Benefits Moisture tolerant Low viscosity Good penetration Excellent bond strength Easy application Short waiting times Solvent-free...
This Sikafloor system, 2540W, is a two-component, low emission, water dispersed, coloured, epoxy resin-based coating for flooring applications. Features and Benefits Low VOC/AMC emissions Low particle emissions Good chemical and mechanical resistance Water vapour permeable Water dilutable Odourless Easy application AgBB approved
Sikafloor 264 N is a two component, solvent free, high building coating and seal coat system from the extensive Sikafloor range. An economic, coloured epoxy for concrete and cement screeds with normal-heavy wear Features and Benefits Good chemical and mechanical resistance Easy application Economical Liquid-proof Gloss finish Slip...
Sikafloor paint systems are renowned for their high performance, durability, aesthetic and decorative qualities – even for high-end purposes which require a heavy-duty floor paint for pedestrian and light vehicular use.
What Sikafloor Can Offer You
Sika is one of the world’s leading manufacturers in the industrial flooring market, thanks to its high-performance technology and product range featured here at Rawlins Paints. With practical and robust flooring solutions that meet high-end decorative and high-performance commercial and industrial sector requirements, these innovative products are designed for:
- Warehouse, workshop and factory floors
- Retail properties – supermarkets, shopping centres, and wholesale markets
- Showroom facilities
- Storage facilities
- Residential areas
- Multi-storey carparks
- Production and manufacturing plants
- Clean rooms, hospital wards, doctor’s surgeries, medicinal facilities
- Art galleries, museums, exhibition spaces
- Schools, colleges and universities – classrooms, gymnasiums, science laboratories, lecture auditoriums
With the perfect balance of function and aesthetics, and a wide range of bespoke colours, there are unlimited design options for any customer and any business.
Eventualities and qualities that Sika floor paints and products can offer you, are:
- Abrasion resistance
- Chemical resistant
- Crack bridging properties
- Decorative and creative floor finishes
- Easy to clean
- Environmentally friendly
- Fast curing
- High-humidity tolerance
- High-performance and ultra-durable
- Hygienic - meets the needs of NHS Legislation
- Low odours
- Low temperature application
- Low VOC emissions
- Noise reduction and improved acoustics
- Smooth or textured floor finishes
- Under-foot comfort
Flooring is arguably the most essential part of the daily functionality of any business, and these Sika floor paints offer fast installation – meaning minimal downtime for any business.
Painting floors with high-quality commercial or industrial coatings is much more cost effective and less disruptive to a project than using cheaper substitutes. Larger projects require some form of ‘guarantee’ for the client and/or building owner to provide peace of mind that the coating system applied to internal or external flooring will last for an agreed period of time - if correctly maintained.
Using our products, it is possible to decorate and protect concrete, tarmac, asphalt, wood or metal floors, both improving its life expectancy for greater periods of times, and delivering waterproofing and protective properties that can lower the risk of major repair and costly maintenance work. Achieve long-lasting results, with the wide range of floor paints and coatings available at Rawlins Paints today.
We offer systems that are available in virtually any colour and finish - including colour matching existing decorative or company colour schemes - in our light to medium (pedestrianised) right up to heavy use (light to medium vehicular activity) coatings for a wide range of interior or exterior substrates and surface materials.
A trained member of our Technical Support Team will visit your site and carry out a full inspection, write a tailored specification to meet your requirements and offer an approved contractor for the application. We will never offer a contractor that we have not trained and approved, all our contractors have successfully completed specific product training on the systems they apply and are monitored regularly to ensure the highest standard of quality is achieved.
By using one of our nationwide approved contractors for our products you enable yourself to take advantage of our guarantees, life expectancies and warranties. This means if we say our system is going to last a certain amount of time, or perform in a certain way and it doesn’t, you’re covered.
If you’re a contractor and would like to become an approved installer of our systems please contact us on 0113 245 5450