Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
There are 154 products.
Active filters
Pre-packed mortar for hand and spray applied tanking renders.Conforms to BS EN 988-1 Suitable for use in basements, swimming pools, vaults, and other areas where tanking is required Application from 6mm High compressive, flexural and tensile strength Pre-packed for increased confidence Trafficable after 24 hours Ronacrete Ronafix...
£51.73 (incl. VAT)
£43.11 (ex. VAT)
Zenova IP embeds the most modern insulating technology in a thermos-like ultra-thin layer. Intended for use in new thermal improvement projects, for the renovation and maintenance of existing wall assemblies to improve their thermal performance. Suitable internally and externally for walls, roofs (metallic, ceramic etc. ), pipes, ducting, and...
£446.40 (incl. VAT)
£372.00 (ex. VAT)
Zenova IR is an ecologic thermal insulating plaster. It is a mono component product based on ceramic microspheres which, after application, present outstanding properties such as:Thermal insulation internally and externally Thermal reflection of sunrays and infrared radiation Anti-condensation characteristics by eliminating the...
£446.40 (incl. VAT)
£372.00 (ex. VAT)
Zenova Primer is an acrylic base coat for use with Zenova IP, Zenova IR and Zenova FP on all applicable substrates.Interior and exterior use For use on floor, wall and roof surfaces including (but not limited to):Timber, masonry Non-ferrous metal (ferrous metals should be primed with an appropriate anti-corrosion primer first)...
£74.40 (incl. VAT)
£62.00 (ex. VAT)
Jotun Hardtop Clear is a two component chemically curing aliphatic acrylic polyurethane coating. It has a high gloss finish with excellent gloss retention. It is typically used as a clear coat in a polyurethane system, or on epoxy/epoxy mastic systems for topsides, decks, superstructures on ships, or for other industrial uses.To be used...
£447.92 (incl. VAT)
£373.27 (ex. VAT)
Axalta Bondon 116 Epoxy Primer & Undercoat is a high solids two pack epoxy intermediate or finish, designed for application over Axalta Bondon 115.Approved over Bondon 115 by UK Network Rail Can be used as part of a surface tolerant epoxy system which can upgrade sound old conventional coatings to a high performance epoxy/polyurethane...
£102.90 (incl. VAT)
£85.75 (ex. VAT)
Resichem 501 CRSG is a high build solvent-free epoxy coating designed for the long term protection of steel and concrete structures against corrosion and chemical attack. The coating can be applied to mechanical or abrasive blast clean surfaces and will cure at temperatures as low as 5˚C. Note: Colours are approximate and not a binding...
£149.40 (incl. VAT)
£124.50 (ex. VAT)
Resichem 501 CRXL is a high build solvent-free epoxy coating designed for the long term protection of steel and concrete structures against corrosion and chemical attack. The coating has an extended usable life making it ideal for standard airless spray applications and warmer climates. Note: Colours are approximate and not a binding...
£169.20 (incl. VAT)
£141.00 (ex. VAT)
PPG PhenGuard 985 is a two-component, high-build, amine adduct-cured novolac phenolic epoxy coating. This product has excellent resistance to a wide range of organic acids, alcohols, edible oils, solvents and fats (regardless of free fatty acid content).Maximum cargo flexibility Can be specified as a 2 or 3 coat system Good resistance to...
£144.96 (incl. VAT)
£120.80 (ex. VAT)
High solids, high-build potable water coating widely used for lining interior steel and concrete tanks, valves and pipe. Formulated for application at conventional builds (100 - 250 microns per coat) as well as high builds (250 microns per coat).Excellent film build and edge protection VOC compliant to current AIM regulations Meets or...
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
Rawlins Paints are the UK’s leading industrial and specialist paint and coatings company, providing solutions for some of the most extreme environments and demanding workplace requirements – from fire retardant paints to heavy duty floor paints, and concrete repair materials to cladding paints. From time to time, there are scenarios and location conditions that even the leading manufacturers must produce specialist product lines with targeted deliverables for. These may be transportation and storage of chemically corrosive materials, or allowing major production companies to conduct repair and redecoration work in strictly monitored and climate controlled conditions where the temperature cannot be standardised for ‘normal’ paint application.
So, whilst we consider all our products to be special-use, this category really does cover the more extreme scenarios – offshore locations, power plants, breweries, dairies, pharmaceutical facilities, highway repairs in wintery conditions, and more.
Our help and advice promise
If you need any advice or guidance with your project, call our Technical Team to discuss what product(s) will be best for you. Site visits can be carried out for larger projects so a full specification can be produced in writing, which will be tailored to meet the projects requirements. Data sheets and advice are always freely available to help you with your project.
