Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
There are 154 products.
Active filters
Jotun Hardtop AX is a two component chemically curing aliphatic acrylic polyurethane coating that has a high gloss finish with very good gloss retention. It has good chemical resistance and is a high solids product. It should be used as a topcoat in atmospheric environments.Jotun Hardtop AX is recommended for topside, deck and...
£102.96 (incl. VAT)
£85.80 (ex. VAT)
International Interfine 878 is a high performance, two component, high solids finish which contains no free isocyanates, offers compliance to current VOC legislation, and affords extended lifetime to first maintenance when utilised as part of a high performance anticorrosive system.A step change in long term colour and gloss compared to...
£438.86 (incl. VAT)
£365.72 (ex. VAT)
International Intergard 740 is a two component epoxy finish coat.Suitable for brush, roller and spray application Suitable for use in a wide range of environments including offshore structures, petrochemical facilities, bridges, pulp and paper mills, and the power industry 4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS &...
£434.21 (incl. VAT)
£361.84 (ex. VAT)
International Intergard 1735 is a high performance, low VOC, water borne two component epoxy with a high gloss finish. Tough, hard wearing chemically resistant epoxy finish Suitable for most circumstances where the odour or emissions from solvent based coatings are unacceptable 4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS...
£138.47 (incl. VAT)
£115.39 (ex. VAT)
International Interlac 665 is a single component alkyd gloss enamel finish.Maintenance coating for use in a wide range of industrial environments including offshore, petrochemical and chemical plants Suitable for areas of limited chemical exposure where an economical single pack finish coat is required Cosmetic finish coat for alkyd...
£66.32 (incl. VAT)
£55.27 (ex. VAT)
Jotun Hardtop Pro is a low VOC, high volume solids, isocyanate free, economical polysiloxane topcoat for offshore structures, tank farms, refineries, power plants, bridges and buildings. Very good colour and gloss retention Very good abrasion resistance Very good chemical resistance Low VOC and high volume solids Isocyanate free Now...
£163.21 (incl. VAT)
£136.01 (ex. VAT)
Rust-Oleum 9100 High Solids Epoxy is a higher solids, better coverage and lower VOC content product than the standard 9100 Epoxy. Two-pack, glossy epoxy coating for metal, walls and floors. The most efficient epoxy system providing a very hard coating with high layer thickness for lasting results even with a single coat application....
£135.82 (incl. VAT)
£113.18 (ex. VAT)
Jotun Hardtop Flexi is a high solids (64% volume) polyurethane topcoat with excellent wetting and adhesion properties. Hardtop Flexi has a remarkable ability to resist impact and will maintain initial gloss level over extended periods. This is one of the few products that contain anti-corrosive pigments for the best direct to metal...
£81.30 (incl. VAT)
£67.75 (ex. VAT)
Jotun Hardtop Flexi Alu has a remarkable ability to resist impact and will maintain initial gloss level over extended periods. Low VOCs, application of single coats up to 110 microns and fast drying add to the features of Hardtop Flexi Alu. This is one of the few products that contain anti-corrosive pigments for the best direct to metal...
£349.68 (incl. VAT)
£291.40 (ex. VAT)
Jotun Jotamastic SF is a two component polyamine cured epoxy mastic coating that is a surface tolerant, solvent free, high build product. Well suited for early immersion and specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity....
£282.64 (incl. VAT)
£235.53 (ex. VAT)
This product is temporarily unavailable; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. International Intergard 345 is a two component, low VOC, high solids, fast curing epoxy primer/finish containing zinc phosphate...
£497.88 (incl. VAT)
£414.90 (ex. VAT)
Please note: This product is subject to a 14 working day lead time. International Interline 399 is a high performance, highly crosslinked two component epoxy novolac tank lining, with excellent heat and solvent resistance suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C (266°F).Thin...
£1,006.39 (incl. VAT)
£838.66 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
Rawlins Paints are the UK’s leading industrial and specialist paint and coatings company, providing solutions for some of the most extreme environments and demanding workplace requirements – from fire retardant paints to heavy duty floor paints, and concrete repair materials to cladding paints. From time to time, there are scenarios and location conditions that even the leading manufacturers must produce specialist product lines with targeted deliverables for. These may be transportation and storage of chemically corrosive materials, or allowing major production companies to conduct repair and redecoration work in strictly monitored and climate controlled conditions where the temperature cannot be standardised for ‘normal’ paint application.
So, whilst we consider all our products to be special-use, this category really does cover the more extreme scenarios – offshore locations, power plants, breweries, dairies, pharmaceutical facilities, highway repairs in wintery conditions, and more.
Our help and advice promise
If you need any advice or guidance with your project, call our Technical Team to discuss what product(s) will be best for you. Site visits can be carried out for larger projects so a full specification can be produced in writing, which will be tailored to meet the projects requirements. Data sheets and advice are always freely available to help you with your project.
