Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
There are 154 products.
Active filters
PPG SigmaPrime 200 is a universal epoxy anticorrosive primer based upon pure epoxy technology, a primer system that is suitable for ballast tanks, deck, topside, superstructure, hull, cargo oil tanks and cargoholds, with excellent anticorrosive properties and water resistance.Surface tolerant primer, with good chemical resistance Good...
£253.68 (incl. VAT)
£211.40 (ex. VAT)
PPG SigmaPrime 700 is a universal epoxy anticorrosive primer, based upon pure epoxy technology, suitable for Ballast Tanks, Decks, Topside, Superstructure and Hulls. The primer system has good adhesion to steel, galvanized steel and non-ferrous metals, curing at temperatures down to 5°C (41°F).Good abrasion resistance for dedicated areas...
£289.92 (incl. VAT)
£241.60 (ex. VAT)
PPG SigmaRite 37 G-1 is a green temperature indication paint for indicating potential dangerous hot spots, changing colour for easy identification. SigmaRite 37 G-1 maintains its deep green colour up to 260°C (500°F), fades after 3 weeks at 280°C (536°F), shows perceptible colour change after 18 hours at 315°C (599°F), and changes to white in...
PPG SigmaShield 460 is a two-component, high solids glass flake reinforced polyamine adduct epoxy coating for long-term protection at areas subject to heavy wear and tear, with very low water permeability, (due to glass flake barrier) and resistance to splash and spillage of a wide range of chemicals.Excellent abrasion and impact...
£380.52 (incl. VAT)
£317.10 (ex. VAT)
PPG SigmaShield 880GF, also known as Amerlock 880GF, a two-component, surface tolerant high solid glass flake epoxy coating designed for use in heavy-duty and corrosive environments for offshore splash zone maintenance.Outstanding sea water resistance - Excellent corrosion resistance Enhanced impact and abrasion resistance - Continues to...
£451.55 (incl. VAT)
£376.29 (ex. VAT)
Axalta ViterThane PLS Recoatable PU Finish, A two pack recoatable polyurethane semi-gloss finish for use on protective systems for steelwork.Excellent colour retention and indefinitely overcoatable. Excellent chemical resistance and low temperature cure. An aliphatic polyurethane providing a tough and durable semi-gloss finish with...
£64.64 (incl. VAT)
£53.87 (ex. VAT)
Nu-Guard High Solids Finish is a two-component polysiloxane-based coating with an excellent decorative appearance and outstanding resistance to solvents and chemicals, making it a first choice anti-graffiti coating for use on external surfaces.For use on external surfaces such as painted brickwork, render, concrete, metal, wood and...
£571.50 (incl. VAT)
£476.25 (ex. VAT)
Zingaceram PU, a 2-pack system with ceramic particles for high chemical and abrasion resistance in tough environments, such as dust and wind-blown sand. Recommended for use as a top coat finish in a Zinga system.Available in more than 180 RAL colours Topcoat 2-pack system for Zinga Apply by brush, roller, conventional sprayer or airless...
£126.36 (incl. VAT)
£105.30 (ex. VAT)
HMG Superthane is a 2K high build, polyurethane coating offering the ultimate levels of chemical resistance, graffiti resistance and superb durability. Superthane has been tested against a wide variety of substances to demonstrate its superb chemical resistance properties. This product MUST be purchased/used in conjuction with its...
£52.73 (incl. VAT)
£43.94 (ex. VAT)
HMG Supersheen is a 2K polyurethane coating offering ultimate levels of: weathering, colour retention, solvent resistance, abrasion resistance, wide ranging chemical resistance. Supplied as:2-Pack System DetailsBase (Part 1) HMG Supersheen - Base 3LHardener (Part 2) HMG Hardener 9002 - 1LTwo-pack system Ease...
£184.51 (incl. VAT)
£153.76 (ex. VAT)
Britannia Chlorinated Rubber Paint is a topcoat with good resistance to salt water and a wide range of chemicals and acids, ready for use for waterproofing roof cladding, tank linings, swimming pools, plant rooms and dairies.Excellent adhesion Interior or exterior use Good coverage - 8-12 sqm2/litre per coat Can be brush, roller or...
£77.38 (incl. VAT)
£64.48 (ex. VAT)
Sherwin-Williams Dura-Plate UHS is a fast curing solvent free epoxy lining coating which rapid return to service and high build, edge retentive properties of tank lining provides superior protection compared to conventional approaches or alternative products. Dura-Plate UHS is the user friendly solution for use in tanks containing a wide range...
£521.64 (incl. VAT)
£434.70 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
Rawlins Paints are the UK’s leading industrial and specialist paint and coatings company, providing solutions for some of the most extreme environments and demanding workplace requirements – from fire retardant paints to heavy duty floor paints, and concrete repair materials to cladding paints. From time to time, there are scenarios and location conditions that even the leading manufacturers must produce specialist product lines with targeted deliverables for. These may be transportation and storage of chemically corrosive materials, or allowing major production companies to conduct repair and redecoration work in strictly monitored and climate controlled conditions where the temperature cannot be standardised for ‘normal’ paint application.
So, whilst we consider all our products to be special-use, this category really does cover the more extreme scenarios – offshore locations, power plants, breweries, dairies, pharmaceutical facilities, highway repairs in wintery conditions, and more.
Our help and advice promise
If you need any advice or guidance with your project, call our Technical Team to discuss what product(s) will be best for you. Site visits can be carried out for larger projects so a full specification can be produced in writing, which will be tailored to meet the projects requirements. Data sheets and advice are always freely available to help you with your project.
