Filter By

Brand

Brand

Hydron Nu-Flame Fire Upgrade System (For Timber)

The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only

Price £352.35 Regular price £391.50
In stock

Sherwin-Williams Macropoxy 400

Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...

Price £58.12 Regular price £64.58
In stock

Thermoguard Thermocoat W

Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:  Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...

Price £46.80 Regular price £52.00
In stock
All sale products

Need Help?

Specialist Renders

Remmers are specialists in all types of render. We have fine, compress, decorative, restoration, undercoat and of course, universal. There is also a selection of mortars that are fast-setting and can prepare the substrate before renders are applied. 

When doing any repair work, it is vital to prepare the surface properly as well as fix any issues. Otherwise you will end up doing the project on repeat. Be sure to remove any debris and clean the surface of any uneven segments. We have products for these purposes too - If in any doubt then check the Product Data Sheet of your repair material. When it comes to identifying the repair work that needs to be done, be sure that you know the root of the problem. Walls can suffer from all manner of sins - structural damage, rising damp from the soil below, flooding from the room above, inefficient foundations - the issues come from every side! It is very easy for a business to decorate their offices or shops to the rafters, fill them with incredibly expensive equipment all to find that they ignored that crack in the wall that grew over time. 

There are 19 products.

Showing 1-12 of 19 item(s)

Active filters

Remmers VM Fill

Remmers VM Fill (formerly Compound Mortar) is a universal cementing, reinforcement, filling and repair mortar, for the restoration of old buildings and for new buildings. Water, weather and frost resistant, stress-equalising, can applied by hand as well as by conventional rendering machines equipped with an after mixer, very smooth and easy to...

Price £53.19
In stock

Remmers Compound Mortar S

Remmers Compound Mortar S is a fast setting cementing and repair mortar that can be felted. It is a high quality reinforcement and filling mortar for reliable and fast repairs on facades. Can be used on mineral substrates suitable for the application of render, e.g. masonry brick, sand-lime brick, concrete, aerated concrete, rubble stone and lime-cement...

Price £50.24
In stock

Remmers SP Top SR

Remmers SP Top SR (formerly Universal Restoration Render) is a fibre based, WTA restoration render with high sulphate resistance and low effective alkali content used for repair, renovation and restoration of old, damp and saltloaded masonry work, wall surfaces and plinth areas. Can be used on all mineral substrates appropriate for the...

Price £37.73
In stock

Remmers Mould Restoration Render

Remmers Mould Restoration Render is a capillary active, climate regulating render used to repair, renovate & refurbish damp interior walls in old & new buildings at risk of mould. Because of its low weight per unit area and favourable deformation behaviour, Mould Restoration Render is also suitable for substrates with less strength and less load-bearing...

Price £43.43
In stock

Remmers Preparatory Mortar

Remmers Preparatory Mortar is a special preparatory mortar according to WTA used for preparing the substrate before cementitious renders are applied. Part of the Kiesol Waterproofing Systems and Remmers Restoration Render Systems. Remmers Preparatory Mortar is a factory-mixed, dry mortar that is ready to use after mixing with water and sets hydraulically.

Price £93.50
In stock

Remmers SP Levell

Remmers SP Levell (formerly Undercoat Render) is a low alkali, levelling and pore undercoat render for restoring old buildings and masonry work, especially render bases with salt loads. Easy to apply and finish in one coat from 10 to 40mm thick! Can be applied by machine, highly stable, fibre reinforced, highly water vapour permeable,...

Price £52.47
In stock

Remmers Preparatory Mortar Rapid

Remmers Preparatory Mortar Rapid is a fast setting, special preparatory mortar used for quickly evening differing absorption behaviour of the render base, e.g. porous brick, natural stone or mixed masonry work. Easy to apply, good adhesion capacity, fast hydraulic setting, render can be applied after just 90 minutes, resistant to water, weather and frost...

Price £49.56
In stock

Remmers SP Top White

Remmers SP Top White (formerly Restoration Render) is a fibre based, WTA restoration render that can also be applied in one layer used for the repair, renovation and restoration of damp, salt loaded wall surfaces and masonry work.

Price £43.38
In stock

Remmers SP Top Q2

Remmers SP Top Q2 (formerly Fine Render) is a mineral surface filler, fine render and reinforcement mortar which can be felted. Ideal for mineral substrates when repairing render and facades. Used for repairing facades, plinths and interior wall surfaces in new and old buildings and heritage buildings, for the production of fine, closed render...

Price £53.73
In stock

Remmers Decorative Render L

Remmers Decorative Render L can be used as a finish for the Remmers Light-Weight Render and Remmers Thermal Insulation Render System. For the production of single layers of render with a Spanish style or troweled texture. Repair and production of thermally insulating layers of render in old buildings, heritage buildings, monuments and for new...

Price £36.55
In stock

Remmers Compress Render

Remmers Compress Render is used to desalinate and remove moisture from natural stone, brick, render and other mineral substrates. It is also used as a sacrificial render on old buildings, historical buildings and monuments, indoors and outdoors. Remmers Compress Render is smooth, easy to work, stable and high yielding. When worked properly it can be...

Price £36.55
In stock

Remmers WP Top (Basic)

Remmers WP Top (Basic) (formerly Repellent Render) is a fibre reinforced, water impermeable render for reliably waterproofing buildings. Single component, polymer modified, dry mortar with hydraulic binders, mineral aggregates and special additives. Low in chromate. Substrate for waterproofing with polymer modified, bitumen thick coatings as...

Price £49.59
In stock

Open a Credit Agreement Trade Account at Rawlins Paints

To open a Credit Agreement Trade Account at Rawlins Paints, simply click on the link below to download a Account Application Form. Once filled in, please return the Application Form to [email protected]

Alongside standard Technical and Sales Support Rawlins Paints offers to its customers, Credit Agreement Trade Account members will also benefit from:

  • 30 Days Credit
  • Preferential Pricing
  • Access to Training
  • Further Guarantees and Warranties
  • And More

For further information, contact [email protected]

Download you Credit Agreement Trade Account Application Form here.