The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. ADVANTAGES Clear or stained finish Tough/Durable finish UV and wear protection (Matt & Satin) Enhances natural beauty
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Stainless Steel Paint
Our selection of Stainless Steel paints come in a variety of colours including black, white, grey and red, delivering comprehensive heat resistance for industrial environments.
Cromadex 495 High Temperature Resistant Primer Finish has a covering power that reduces application costs and comes in different colours on request. We also offer further paints suitable for insulated and non-insulated surfaces, anti-corrosion, and for appliance to hot substrates.
Stainless steel heat resistant paints are suitable for application to process vessels, offshore rigs and exterior pipework.
Jotun Solvalitt is designed as a white or black heat resistant coating suitable for insulated and non insulated surfaces. It is a one component physically drying silicone acrylic coating that is heat resistant up to 600°C. It can be used as a primer, mid coat or finish coat in atmospheric environments.
Jotun Solvalitt Alu is a one component physically drying silicone acrylic coating that is an aluminium pigmented product leaving a metallic silver finish. It is heat resistant up to 600°C and can be used as a primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and...
Jotun Epoxy HR is a two component polyamine cured novolac epoxy coating that is heat resistant up to 200°C and can be applied on hot substrates up to 150°C. It can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and aluminium substrates.
International Intertherm 228HS is a highly crosslinked, two component, high build epoxy phenolic coating suitable for exposure in a wide range of highly corrosive environments, including insulated and uninsulated carbon and stainless steel for use on the exterior of pipework, process vessels etc., operating at temperatures up to 230°C (446°F).
Jotatemp 250 is a two component glass flake reinforced epoxy composite coating. It is heat resistant up to 250°C (482°F) and can be applied on hot substrates up to 150°C (300°F). Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and aluminium substrates.
Sherwin-Williams Heat-Flex Hi-Temp 1200 is the next generation single- component inert multipolymeric matrix coating that outperforms alternatives in combating corrosion under insulation (CUI) and in high heat applications.
Cromadex 495 High Temperature Resistant (up to 550°C) Primer Finish is a black, high temperature resistant primer finish suitable for items reaching temperatures of up to 550°C. The product has a fast touch dry time helping to improve productivity. It has excellent covering power helping to reduce application costs.
SigmaCover 2, also known as Amerlock 2, a high-solids high performance self-priming low-VOC universal epoxy coating for substrates including carbon steel, concrete, masonry, galvanised steel, non-ferrous metal and stainless steel. The coating has numerous qualifications, including for nuclear service, flame spread, subsea surfaces and potable...