Thermoguard Timbercoat 60 Minute System

Thermoguard Timbercoat 60 Minute System is a coloured intumescent paint system for interior and exterior timber surfaces. Each pack contains the correct amount of basecoat (Timbercoat) and topcoat (Smoke and Flame Retardant Dualcoat) to ensure protection is achieved inline with the manufacturers recommendations to the respective area in...

Price £123.12 Regular price £136.80
In stock

Thermoguard Wallcoat 30 & 60 Minute System for Plasterboard

Thermoguard Wallcoat 30 & 60 Minute System for Plasterboard is a coloured intumescent paint system for interior plasterboard and cement board ceiling and wall surfaces. These packs have been created to help users ensure they are purchasing sufficient product for their project. Each pack contains the correct amount of basecoat (Wallcoat)...

Price £114.05 Regular price £126.72
In stock

Thermoguard Wallcoat BS Class 1/0 & EN Class B System

Thermoguard Wallcoat BS Class 1/0 & EN Class B System is a coloured fire retardant paint system for interior plasterboard ceiling and wall surfaces. Each pack contains the correct amount of basecoat (Wallcoat) and topcoat (Wallcoat Smoke & Flame Retardant Topcoat) to ensure protection is achieved inline with the manufacturers...

Price £82.94 Regular price £92.16
In stock

Thermoguard Thermocoat W

Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:  Up to 120 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...

Price £45.36 Regular price £50.40
In stock
All sale products

Need Help?

30 Mins - Internal Water-Based

Intumescent Paint for Steel disclaimer: Always ensure the product you are purchasing is suitable for the intended use/project. This will include but is not limited to gaining clarification that the product in question can achieve the required fire protection for the steel sections and environment you have. The sub-categories within the Intumescent Paints for Steel section allow users to filter by internal or external use, on-site or off-site application, and product type – water-based, solvent-based, epoxy-based and MMA-based. These are to be used as a guide only as there will be instances where a product will be able to achieve 90min protection on certain steel section sizes but not others, or where it is suitable for external use in environments up to C4 but not C5-M for example. For further product, project and pricing support, we ALWAYS recommend you contact our Technical Department before purchase and use.

There are 18 products.

Showing 1-12 of 18 item(s)

Active filters

Bollom Brosteel Ultra 60

Bollom Brosteel Ultra 60, is a new and improved revolutionary thin-film waterborne white intumescent paint for standard, interior structural steel members, providing 30 minutes fire protection in only one coat and 60 minutes in two coats - see below for details.  Please note that 2.5L and 5L sizes are temporarily unavailable For internal...

Price £172.23
In stock

Jotun Steelmaster 1200WF

Jotun Steelmaster 1200WF is a one component waterborne acrylic thin film intumescent coating independently tested and approved for fire protection of structural steel exposed to cellulosic fire up to 180 minutes. Suitable for properly prepared carbon steel substrates. **Available for delivery - see Delivery Options below**

Price £144.30
In stock

International Interchar 1260

International Interchar 1260 is a single component, borate, chlorine and APEO free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire.  Class leading thin film waterborne intumescent coating Zero VOC* formulation reduces environmental impact...

Price £331.99
In stock

Nullifire SC802 On-Site Water-Based Intumescent Basecoat

Nullifire SC802 On-Site Water-Based Intumescent Basecoat is a water- based, white, thin film intumescent coating for the protection of internal structural steelwork. Nullifire SC802 can provide up to 60 minutes fire resistance.  Includes Optifire+ technology - reliable and traceable fire protection This product is only available for 2-3...

Price £59.94
In stock

Zeroflame Aquasteel WB+

Zeroflame Aquasteel WB+ is a white thin-film waterbourne intumescent coating with a new and improved formula designed to provide 30 and 60 minutes fire resistance on standard structural steel members in internal envoronments. It provides an easier and more efficient alternative to cladding steel members in plasterboard. New improved...

Price £60.03 Regular price £66.70
In stock

Sherwin-Williams Firetex FX5062

Sherwin-Williams Firetex FX5062 is a water-based TCEP free thin film intumescent coating, specifically designed for airless spray application to provide fire resistance for periods up to 90 mins on structural steel. Firetex FX5062 has been Certifire Approved. More Information **Available for delivery - see Delivery Options below**

Price £152.10
In stock

Sherwin-Williams Firetex FX5090

Sherwin-Williams Firetex FX5090 is a water based TCEP free thin film intumescent coating, designed for application by airless spray to provide fire resistance for periods of up to 120 minutes on structural steel.  More Information **Available for delivery - see Delivery Options below**

Price £173.70
In stock

Sherwin-Williams Firetex FX5120

Sherwin-Williams Firetex FX5120 is a water based TCEP free thin film intumescent coating. Firetex FX5120 has been designed for application by airless spray, to provide fire resistance for periods of up to 120 minutes on structural steel. FX5120 can also be used to enhance the fire resistance of concrete slabs and decks up to 60 minutes.  More...

Price £155.70
In stock

International Interchar 1290

International Interchar 1290 is a thin film waterborne intumescent coating optimised for hollow sections up to 180 minutes fire resistance whilst still maintaining aesthetics. Interchar 1290 is a single component, borate and chlorine free, water borne intumescent coating designed for on-site application to structural steel requiring protection...

Price £490.71
In stock

Jotun Steelmaster 600WF

Jotun Steelmaster 600WF is specially designed as passive fire protection for steel constructions. Designed to protect up to 60 minutes on a wide range of I section beams and columns. Will provide 90 minutes fire duration as per BS476 part 20-21. Suitable for structural steel exposed to internal environments up to corrosivity category C3 (ISO...

Price £40.95
In stock

Hydron Nu-Flame W Steel Basecoat

Nu-Flame W Steel Basecoat is a thin film water-based decorative intumescent paint system providing fire resistance to structural steel and cast iron. Advantages Up to 90 mins fire resistance Water-based Safe for internal use 12-month shelf life More Information **Available for delivery - see Delivery Options below**

Price £243.60
In stock

Thermoguard Thermocoat WI Ultimate

Thermoguard Thermocoat WI is a water-based intumescent paint system providing fire resistance to structural steel and cast iron  with a minimum number of coats. A compatible decorative overcoat system ensures the system will enhance the building’s architectural and design features. Optimised for Universal Beams, Columns and other open...

Price £45.36 Regular price £50.40
In stock

Certificates

All of the intumescent paints we offer have been tested to varying British/European standards by recognised independent third parties depending on their required use and performance. In addition to these industry standard tests, some products also offer additional paperwork after use by way of a ‘certificate’ that can be obtained in different ways - manufacturer dependent. Some require a form to be completed and returned by email, others have online application forms, others can be simply called to provide project details verbally. Not ALL products offer this additional supplement and if this type of certificate is important to your project you should contact our Technical Team on 0113 2455450 (option 2) or [email protected] to advise them of this so they can ensure they recommend a suitable product accordingly. Certain larger projects may also require the involvement of an independent inspector, again you should contact our Technical Department to discuss this if required.

Our help and advice promise

Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. Whether it’s structural steel in a warehouse, fire retardant paint for wood on a new-build, or the internal walls of a block of flats, we can provide a full specification and offer guidance throughout the project.