Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Mirka Abranet Hand Sanding Kit - Sand without dust - Hand Sanding Kit. The Mirka Abranet Hand Sanding Kit can be used on fillers, paints, varnishes, composites and hard and soft woods.
Ennis-Flint Verge Marker Posts
Mirka Abranet Replacement Sanding Strips (10pk) to be used with the Mirka Abranet Hand Sanding Kit providing dust-free sanding, longer life and a healthier work environment.
Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.
Intumescent Paint for Steel disclaimer: Always ensure the product you are purchasing is suitable for the intended use/project. This will include but is not limited to gaining clarification that the product in question can achieve the required fire protection for the steel sections and environment you have. The sub-categories within the Intumescent Paints for Steel section allow users to filter by internal or external use, on-site or off-site application, and product type – water-based, solvent-based, epoxy-based and MMA-based. These are to be used as a guide only as there will be instances where a product will be able to achieve 90min protection on certain steel section sizes but not others, or where it is suitable for external use in environments up to C4 but not C5-M for example. For further product, project and pricing support, we ALWAYS recommend you contact our Technical Department before purchase and use.
Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.
There are 6 products.
Jotun Steelmaster 120SB is a one component solvent based acrylic thin film intumescent coating independently approved for fire protection of structural steel exposed to celulosic fire. It can be used as mid coat or finish coat in atmospheric environments and is suitable on approved primers on carbon steel and galvanised steel substrates.
Jotun Steelmaster 60/120 is a one component solvent based acrylic thin film intumescent coating independently approved for fire protection of structural steel exposed to celulosic fire. It can be used as a mid coat or finish coat in atmospheric environments and is suitable on approved primers on carbon steel and galvanised steel substrates.
Jotun Steelmaster 60SB is a one component solvent based acrylic thin film intumescent coating independently approved for fire protection of structural steel exposed to cellulosic fire. It can be used as a mid coat or finish coat in atmospheric environments and is suitable on approved primers on carbon steel and galvanised steel substrates.
Sherwin-Williams Firetex FX1003 is a single pack, thin film intumescent coating, designed for site application by airless spray, to provide fire resistance for up to 120 minutes on structural steel.
Interchar 2060c is an improved weather resistant version of Interchar 2060 recommended for a C4 environment as per ISO 12944-2:2007. Allows Interchar 2060c to remain untopcoated for up to 6 months provided there is no pooled/heavy running water, or frequent high humidity conditions. We do not recommend leaving the product untopcoated without first seeking...
We no longer stock this product, but can recommend Nullifire S606 Solvent-Based Intumescent Coating as a great alternative.
