Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.
60 Mins - External Use
Intumescent paints and coatings are available for both internal and external application on steel and structural steel, although some are designed and tested specifically for external use only. These exterior steel intumescent coatings usually offer greater scope for application in adverse conditions such as in shop or on site where the steel may be exposed for a period of time during construction. Designed with improved weatherproof and in some instances corrosion protection qualities, external use intumescent paint is vital for builds where application and service of the substrate cannot be guaranteed in dry, internal environments.
External use steel and cast iron intumescent paints and coatings may require compatible primers or additional topcoats to achieve full fire-resistant protection to substrates. Please contact Rawlins Paints’ Technical Support Team for approved product combination systems.
Intumescent Paint for Steel disclaimer: Always ensure the product you are purchasing is suitable for the intended use/project. This will include but is not limited to gaining clarification that the product in question can achieve the required fire protection for the steel sections and environment you have. The sub-categories within the Intumescent Paints for Steel section allow users to filter by internal or external use, on-site or off-site application, and product type – water-based, solvent-based, epoxy-based and MMA-based. These are to be used as a guide only as there will be instances where a product will be able to achieve 90min protection on certain steel section sizes but not others, or where it is suitable for external use in environments up to C4 but not C5-M for example. For further product, project and pricing support, we ALWAYS recommend you contact our Technical Department before purchase and use.
Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.
Jotun Steelmaster 120SB is a one component solvent based acrylic thin film intumescent coating independently approved for fire protection of structural steel exposed to celulosic fire. It can be used as mid coat or finish coat in atmospheric environments and is suitable on approved primers on carbon steel and galvanised steel substrates.
Jotun Steelmaster 60SB is a one component solvent based acrylic thin film intumescent coating independently approved for fire protection of structural steel exposed to cellulosic fire. It can be used as a mid coat or finish coat in atmospheric environments and is suitable on approved primers on carbon steel and galvanised steel substrates.
International Interchar 212 is a high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating designed to be used on steelwork requiring protection from cellulosic fires.
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Sherwin-Williams Firetex FX1003 is a single pack, thin film intumescent coating, designed for site application by airless spray, to provide ﬁre resistance for up to 120 minutes on structural steel.
Sherwin-Williams Firetex FX2003 is single pack thin ﬁlm intumescent coating, designed for in-shop application by airless spray to provide ﬁre resistance for up to 120 minutes on structural steel.
Interchar 2060c is an improved weather resistant version of Interchar 2060 recommended for a C4 environment as per ISO 12944-2:2007. Allows Interchar 2060c to remain untopcoated for up to 6 months provided there is no pooled/heavy running water, or frequent high humidity conditions. We do not recommend leaving the product untopcoated without...
Sherwin-Williams Firetex FX1005, a single pack thin-film white intumescent coating for structural steel, providing up to 120 minutes fire protection. Designed for site application by airless spray - can also be brushed Tested and assessed to EN13381-8 European Technical Approval 16-0588 CE Marking Number 1121-CPR-GA5030 Can be exposed...
Sherwin-Williams Firetex FX2005, a single pack thin film intumescent coating designed for in-shop application by airless spray to provide fire resistance for up to 120 minutes on structural steel. Tested and assessed to EN13381-8 European Technical Approval 16-0588 CE Marking Number 1121-CPR-GA5030 Can resist normal weather conditions...
Sherwin-Williams FIRETEX FX9500, a 2 -pack exterior durable intumescent offering 60, 90 & 120 minute fire protection both internally and externally without topcoat, which can be applied directly onto blast cleaned steel. Suitable for application in-shop and on site. Ultra durable - suitable for use in a C5-I environment, as defined in...