Thermoguard Timbercoat 60 Minute System

Thermoguard Timbercoat 60 Minute System is a coloured intumescent paint system for interior and exterior timber surfaces. Each pack contains the correct amount of basecoat (Timbercoat) and topcoat (Smoke and Flame Retardant Dualcoat) to ensure protection is achieved inline with the manufacturers recommendations to the respective area in...

Price £123.12 Regular price £136.80
In stock

Thermoguard Wallcoat 30 & 60 Minute System for Plasterboard

Thermoguard Wallcoat 30 & 60 Minute System for Plasterboard is a coloured intumescent paint system for interior plasterboard and cement board ceiling and wall surfaces. These packs have been created to help users ensure they are purchasing sufficient product for their project. Each pack contains the correct amount of basecoat (Wallcoat)...

Price £114.05 Regular price £126.72
In stock

Thermoguard Wallcoat BS Class 1/0 & EN Class B System

Thermoguard Wallcoat BS Class 1/0 & EN Class B System is a coloured fire retardant paint system for interior plasterboard ceiling and wall surfaces. Each pack contains the correct amount of basecoat (Wallcoat) and topcoat (Wallcoat Smoke & Flame Retardant Topcoat) to ensure protection is achieved inline with the manufacturers...

Price £82.94 Regular price £92.16
In stock

Thermoguard Thermocoat W

Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:  Up to 120 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...

Price £45.36 Regular price £50.40
In stock
All sale products

Need Help?

60 Mins - Internal Off-Site Application

Intumescent Paint for Steel disclaimer: Always ensure the product you are purchasing is suitable for the intended use/project. This will include but is not limited to gaining clarification that the product in question can achieve the required fire protection for the steel sections and environment you have. The sub-categories within the Intumescent Paints for Steel section allow users to filter by internal or external use, on-site or off-site application, and product type – water-based, solvent-based, epoxy-based and MMA-based. These are to be used as a guide only as there will be instances where a product will be able to achieve 90min protection on certain steel section sizes but not others, or where it is suitable for external use in environments up to C4 but not C5-M for example. For further product, project and pricing support, we ALWAYS recommend you contact our Technical Department before purchase and use.

Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.

There are 11 products.

Showing 1-11 of 11 item(s)

Active filters

Jotun Steelmaster 120SB

Jotun Steelmaster 120SB is a one component solvent based acrylic thin film intumescent coating independently approved for fire protection of structural steel exposed to celulosic fire. It can be used as mid coat or finish coat in atmospheric environments and is suitable on approved primers on carbon steel and galvanised steel substrates....

Price £224.70
In stock

Jotun Steelmaster 60SB

Jotun Steelmaster 60SB is a one component solvent based acrylic thin film intumescent coating independently approved for fire protection of structural steel exposed to cellulosic fire. It can be used as a mid coat or finish coat in atmospheric environments and is suitable on approved primers on carbon steel and galvanised steel substrates....

Price £177.30
In stock

International Interchar 2060

International Interchar 2060 is a single component, solvent borne, borate free, high solids, low VOC, thin film intumescent coating optimized for 60 minutes fire resistance to structural steelwork. Independently tested at accredited laboratories to BS476 Parts 20-21, AS 1530.4-2005 and AS 4100, and third party assessed and certified....

Price £269.00
In stock

International Interchar 212

International Interchar 212 is a high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating designed to be used on steelwork requiring protection from cellulosic fires. Offers up to 3 hours fire protection Approvals to a range of fire standards Compatible with a range of topcoats and colours...

Price £699.30
In stock

Sherwin-Williams Firetex FX2003

Sherwin-Williams Firetex FX2003 is single pack thin film intumescent coating, designed for in-shop application by airless spray to provide fire resistance for up to 120 minutes on structural steel.  More Information **Available for delivery - see Delivery Options below**

Price £220.50
In stock

International Interchar 2060c

Interchar 2060c is an improved weather resistant version of Interchar 2060 recommended for a C4 environment as per ISO 12944-2:2007. Allows Interchar 2060c to remain untopcoated for up to 6 months provided there is no pooled/heavy running water, or frequent high humidity conditions. We do not recommend leaving the product untopcoated without...

Price £507.60
In stock

Sherwin-Williams Firetex FX2005

Sherwin-Williams Firetex FX2005, a single pack thin film intumescent coating designed for in-shop application by airless spray to provide fire resistance for up to 120 minutes on structural steel. Tested and assessed to EN13381-8 European Technical Approval 16-0588 CE Marking Number 1121-CPR-GA5030 Can resist normal weather conditions...

Price £220.62
In stock

Sherwin-Williams FIRETEX FX9500

Sherwin-Williams FIRETEX FX9500, a 2 -pack exterior durable intumescent offering 60, 90 & 120 minute fire protection both internally and externally without topcoat, which can be applied directly onto blast cleaned steel. Suitable for application in-shop and on site.  Ultra durable - suitable for use in a C5-I environment, as defined in...

Price £233.55
In stock

Nullifire SC601 Off-Site Intumescent Base Coat

Nullifire SC601 Off-Site Intumescent Base Coat is an alternative off-site (in shop) version of Nullifire SC602, a single pack acrylic thin film intumescent basecoat for fire protection of internal & semi-exposed structural steelwork up to 60 minutes. Intumescent paint for steel Easy to apply, designed for on-site application by airless...

Price £216.00
In stock

Zeroflame Aquasteel WB+ 60min System for Hollow Sections

Zeroflame Aquasteel WB+ 60min System for Hollow Sections is a pack that provides sufficient intumescent basecoat (Zeroflame Aquasteel WB+) and coloured topcoat (Zeroflame Aquasteeel WB+ Finish) to protect suitably primed, standard Square, Rectangular and Circular steel hollow sections in internal environments to 60 minute fire resistance....

Price £115.03
In stock

Zeroflame Aquasteel WB+ 60min System for Universal Beams & Columns

Zeroflame Aquasteel WB+ 60min System for Universal Beams & Columns is a pack that provides sufficient intumescent basecoat (Zeroflame Aquasteel WB+) and coloured topcoat (Zeroflame Aquasteeel WB+ Finish) to protect suitably primed, standard ‘ɪ’ shape structural steel beams and columns in internal environments to 60 minute fire resistance....

Price £115.03
In stock