CLEARANCE - Axalta ViterClad 50 Finish

Axalta ViterClad 50 Finish is a two pack recoatable polyurethane finish specially formulated for the maintenance and repainting of architectural cladding, especially recommended for the maintenance of Corus Colorcoat HP200 and HPS200 cladding. Available in 350+ colours Expected system lifetime up to 15 years (depending on exposed...

Price £55.81 Regular price £111.63
In stock

CLEARANCE - Bradite One Can

Bradite One Can is a quick-drying primer/finish coat in one can, with excellent adhesion, stain blocking and anti-corrosive properties. Suitable for use over most properly cleaned and prepared commercial wood, uPVC, glass, plastic and metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Available in...

Price £9.99 Regular price £19.95
In stock

CLEARANCE - Bradite Industrial Degreaser

Bradite Industrial Degreaser is an aqueous alkaline low foaming detergent used for degreasing contaminated surfaces prior to painting. Ideally suited for degreasing oily or soiled surfaces and for removing road dirt. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Biodegradable in general use...

Price £5.69 Regular price £11.38
In stock

CLEARANCE - Bradite Pre-Treat Galvanised Steel

Bradite Pre-Treat Galvanised Steel is a mordent solution used as a pre-treatment for galvanised steel, to provide a key for all paint primers and finishes. Easy to use solution; clean up with water after use. Advantages British gas reference BGC MO1. Department of Transport Item NO:155. ISO 9001:2008 ISO 140001:2004 1 x 1l available...

Price £5.25 Regular price £10.51
In stock
All sale products

Need Help?

60 Mins - Internal Use

Intumescent paints and coatings are available for both internal and external application on structural steel, although some are designed and tested specifically for internal use only. These internal use only intumescent coatings will usually offer excellent cost benefits, and are generally suitable for horizontal and vertical girders, columns and hollow section steel members, for on-site application in heated, dry internal environments. Internal intumescent coatings may not be suitable for areas subject to high humidity, moisture content or other challenging conditions.

Locations that internal use intumescent paint for steel to provide passive fire protection to structural steelwork while maintaining architectural aesthetics for commercial infrastructure assets include Airports, leisure facilities, Commercial buildings, Retail complexes, etc.

Intumescent Paint for Steel disclaimer: Always ensure the product you are purchasing is suitable for the intended use/project. This will include but is not limited to gaining clarification that the product in question can achieve the required fire protection for the steel sections and environment you have. The sub-categories within the Intumescent Paints for Steel section allow users to filter by internal or external use, on-site or off-site application, and product type – water-based, solvent-based, epoxy-based and MMA-based. These are to be used as a guide only as there will be instances where a product will be able to achieve 90min protection on certain steel section sizes but not others, or where it is suitable for external use in environments up to C4 but not C5-M for example. For further product, project and pricing support, we ALWAYS recommend you contact our Technical Department before purchase and use.

Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.

There are 25 products.

Showing 1-12 of 25 item(s)

Active filters

Bollom Brosteel Ultra 60 - NEW IMPROVED!

Bollom Brosteel Ultra 60, a new improved revolutionary thin-film waterborne white intumescent paint for standard, interior structural steel members, providing 30 minutes fire protection in only one coat and 60 minutes in two coats - see below for details. New, improved formula For internal use only Water-based - quick drying thin-film...

Price £54.58
In stock

Jotun Steelmaster 1200WF

Jotun Steelmaster 1200WF is a one component waterborne acrylic thin film intumescent coating independently tested and approved for fire protection of structural steel exposed to cellulosic fire up to 180 minutes. Suitable for properly prepared carbon steel substrates.

Price £160.72
In stock

Jotun Steelmaster 120SB

Jotun Steelmaster 120SB is a one component solvent based acrylic thin film intumescent coating independently approved for fire protection of structural steel exposed to celulosic fire. It can be used as mid coat or finish coat in atmospheric environments and is suitable on approved primers on carbon steel and galvanised steel substrates.

Price £214.75
In stock

Jotun Steelmaster 60SB

Jotun Steelmaster 60SB is a one component solvent based acrylic thin film intumescent coating independently approved for fire protection of structural steel exposed to cellulosic fire. It can be used as a mid coat or finish coat in atmospheric environments and is suitable on approved primers on carbon steel and galvanised steel substrates.

Price £214.68
In stock

International Interchar 1260

International Interchar 1260 is a single component, borate, chlorine and APEO free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire.  Coverage Calculator

Price £491.13
In stock

International Interchar 2060

International Interchar 2060 is a single component, solvent borne, borate free, high solids, low VOC, thin film intumescent coating optimized for 60 minutes fire resistance to structural steelwork. Independently tested at accredited laboratories to BS476 Parts 20-21, AS 1530.4-2005 and AS 4100, and third party assessed and certified.

Price £326.35
In stock

International Interchar 212

International Interchar 212 is a high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating designed to be used on steelwork requiring protection from cellulosic fires.

Price £692.28
In stock

Thermoguard Thermocoat W

Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:  Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...

Price £46.80 Regular price £52.00
In stock

Zeroflame Aquasteel WB+

Zeroflame Aquasteel WB+ is a White Intumescent Coating that is ideal for smaller fireproofing jobs on steel. Achieves 30 and 60 mins' fire resistance on structural steel profiles Tested to internationally accepted standards BS476 Parts 20 and 21 Certificate application included Fast drying Apply by brush, roller or airless spray...

Price £60.03 Regular price £66.70
In stock

Sherwin-Williams Firetex FX1003

Sherwin-Williams Firetex FX1003 is a single pack, thin film intumescent coating, designed for site application by airless spray, to provide fire resistance for up to 120 minutes on structural steel.

Price £207.90
In stock

Sherwin-Williams Firetex FX2003

Sherwin-Williams Firetex FX2003 is single pack thin film intumescent coating, designed for in-shop application by airless spray to provide fire resistance for up to 120 minutes on structural steel. 

Price £207.90
In stock