Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.
90 Mins - External Use
Intumescent paints and coatings are available for both internal and external application on steel and structural steel, although some are designed and tested specifically for external use only. These exterior steel intumescent coatings usually offer greater scope for application in adverse conditions such as in shop or on site where the steel may be exposed for a period of time during construction. Designed with improved weatherproof and in some instances corrosion protection qualities, external use intumescent paint is vital for builds where application and service of the substrate cannot be guaranteed in dry, internal environments.
External use steel and cast iron intumescent paints and coatings may require compatible primers or additional topcoats to achieve full fire-resistant protection to substrates. Please contact Rawlins Paints’ Technical Support Team for approved product combination systems.
Intumescent Paint for Steel disclaimer: Always ensure the product you are purchasing is suitable for the intended use/project. This will include but is not limited to gaining clarification that the product in question can achieve the required fire protection for the steel sections and environment you have. The sub-categories within the Intumescent Paints for Steel section allow users to filter by internal or external use, on-site or off-site application, and product type – water-based, solvent-based, epoxy-based and MMA-based. These are to be used as a guide only as there will be instances where a product will be able to achieve 90min protection on certain steel section sizes but not others, or where it is suitable for external use in environments up to C4 but not C5-M for example. For further product, project and pricing support, we ALWAYS recommend you contact our Technical Department before purchase and use.
Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.
Jotun Steelmaster 120SB is a one component solvent based acrylic thin film intumescent coating independently approved for fire protection of structural steel exposed to celulosic fire. It can be used as mid coat or finish coat in atmospheric environments and is suitable on approved primers on carbon steel and galvanised steel substrates.
International Interchar 2090 is a single component, solvent borne, borate free, high solids, low VOC intumescent coating designed to maintain your architectural aesthetics whilst providing fire protection for up to 120 minutes for columns, I-sections, cellular beams and hollows.
International Interchar 212 is a high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating designed to be used on steelwork requiring protection from cellulosic fires.
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Sherwin-Williams Firetex FX1003 is a single pack, thin film intumescent coating, designed for site application by airless spray, to provide ﬁre resistance for up to 120 minutes on structural steel.
Sherwin-Williams Firetex FX2003 is single pack thin ﬁlm intumescent coating, designed for in-shop application by airless spray to provide ﬁre resistance for up to 120 minutes on structural steel.
Sherwin-Williams Firetex M95 is an epoxy intumescent suitable for cellulosic fire protection. Firetex M95 is an exterior durable intumescent, which can be applied directly onto blast cleaned steel.
PPG SteelGuard 702 is a one-component, thin-film solvent-borne intumescent coating for fire protection of circular and rectangular hollow-section structural steel. Provides up to 90 minutes protection from cellulosic fires and is suitable to apply on or offsite. Top Features Tested and assessed to EN 13381-8 CE marked product, ETA 15/0053...
A one-component, thin-film solvent-borne intumescent coating for fire protection of circular and rectangular hollow section structural steel. Top Features Tested and assessed to EN 13381-8 CE marked product, ETA 15/0053 Assessed to ETAG 018-2 for all durability classifications
Thermoguard Thermocoat S, an intumescent anti-fire paint for structural steel and cast iron. Provides up to 90 minutes fire resistance, maintaining the structural integrity of buildings. UKAS/ EGOLF Fire Test Laboratory Certification to BS 476 Part 21 Fire Resistance to load bearing elements of structures Contact our technical team for...