Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.
Structural Bonding Agents
Bonding agents play a key role in any project, allowing substrates to "take" to the products being used and enabling optimum performance. When it comes to structural repair, you are looking for an exceptional bonding process.
Sika have produced a large range of products in order to cover all the bases. There are bonding agents for concrete, masonry, stonework, steel, cast iron, aluminium, timber and Sika CarboDur® Plates. The aim is to produce an abrasion resistant, impact resistant, that will harden without shrinkage, have excellent creep resistance and be impermeable to water vapour and liquids. Sikadur 30 is an example of this. There are products suitable for use with drinking water, rapid cures and differing temperatures.
There are products that can be used inside and outside, using the latest silicone and polyurethane technologies. Sika's MaxTack range, Sikaflex, Sikadur, Sikabond, SikaScreed and Anchorfix are popular ranges on the market found here at competitive prices. You will also find that some products have certificates of compliance too.
If you are unsure as to which product would be best for your project, please do not hesitate to contact our Technical Support Team on 0113 245 5450, [email protected], or on any of our social media channels.
Sikadur 30 is a thixotropic, structural two part adhesive, based on a combination of epoxy resins and special filler, designed for use at normal temperatures between +8°C and +35°C for bonding Carbon Fibre & Steel reinforcement.
Sikadur 300 is a two part, epoxy based impregnating resin for SikaWrap fabric reinforcement for the wet application method and primer resin for the wet application system. Easy mix and application by trowel and impregnation roller, manufactured for manual or mechanical saturation methods, good adhesion to many substrates, High mechanical properties, extra...
Sikadur 330 is a two part, thixotropic epoxy based impregnating resin / adhesive. Used as impregnation resin for SikaWrap fabric reinforcement for the dry application method, primer resin for the wet application system and structural adhesive for bonding Sika CarboDur plates into slits.
Sikadur 31 EF is a moisture tolerant, thixotropic, structural two part adhesive and repair mortar, based on a combination of epoxy resins and special fillers, designed for use at temperatures between +10°C and +30°C. Easy to mix and apply, good adhesion to most construction materials, non-sag in vertical and overhead applications, hardens without shrinkage.
Sikadur 31 CF Rapid is a moisture tolerant, thixotropic, structural two part adhesive and repair mortar, based on a combination of epoxy resins and special fillers, designed for use at temperatures between +5°C and +20°C. Easy to mix and apply, very good adhesion to most construction materials, high strength adhesive, no primer needed, impermeable to...
Sikadur 31 DW is a thixotropic, two part adhesive and repair mortar, based on epoxy resins and special fillers which has been specially formulated to meet the requirements for use in contact with drinking water. No primer needed, high initial and ultimate strengths, good abrasion resistance, hardens without shrinkage, suitable for dry and damp concrete...
Sikadur 31 DW Rapid is a solvent-free, thixotropic, two part adhesive and repair mortar, based on epoxy resins and special fillers which has been specially formulated to meet the requirements for use in contact with drinking water. Easy to mix and apply, very good adhesion to most of the construction materials, non-sag and suitable for vertical and...
Sikadur 32 Normal is a moisture tolerant, structural, two part bonding agent, based on a combination of epoxy resins and special fillers, designed for use at temperatures between +10°C and +30°C. Easy to mix and apply, suitable for dry and damp concrete surfaces, very good adhesion to most construction materials, hardens without shrinkage, no primer needed.
Sikadur Combiflex CF Adhesive Type N and Type R are thixotropic two part adhesives based on epoxy resins and fillers. The Sikadur Combiflex CF Adhesive Type N and Type R are part of the Sikadur Combiflex System and used to glue the Sikadur Combiflex SG Tape or the Sikadur Hypalon Strip to different substrates. Type N (= Normal Potlife) and Type R (= Rapid...
Sika ViscoBond is a concentrated liquid admixture designed for use as a bonding agent with cement-based products in interior or exterior applications. It is also designed to improve cement based mortars and concretes to waterproof them, enhance their workability and increase their tensile, flexural and bond strengths. The product conforms to EN-934-2:T9.
Sika Multi-Stick based on hybrid polymer technology is the ultimate building adhesive, the first hybrid polymer grab adhesive especially created for the Trade, uniquely packed in a plastic 350ml cartridge. This superior adhesive has the ability to bond virtually anything to everything in both wet and dry conditions, and even underwater or in the rain.
Sikaflex EBT+ (box of 12x300ml cartridges) is a multi-purpose 1-part, elastic, polyurethane adhesive, sealant and filler. It bonds to all common building materials, is permanently elastic and has excellent grab and gap filling properties. Bonds to concrete, brick, mortar, wood, metals, glass, resins and most plastics. Image already added
Sika AG is a specialty chemical company for building and motor vehicle supplies, headquartered in Baar, Switzerland. It has a leading market position in both the building sector and the automotive industry.
Kaspar Winkler invented the first Sika product in 1910, and their first major project was the waterproofing of the Gotthard tunnel in his native Switzerland.
Today Sika can be found in 101 different countries, including here in the UK since 1927, based in Welwyn Garden City and Preston, Lancashire. From the basement to the roof, Sika provides an entire range of products for the repair, protection, construction or sealing of your building.