Structural repair is always essential when ensuring the safety of your building, bridge or other structure. We have repair materials to seal connection joints in concrete and masonry, solvent-free and odourless options, age-resistant and anti-weathering, as well as those that can be used on metal. In the case of structural repair, you should ALWAYS talk to a structural engineer before choosing a product or embarking on a project. Our team can help you choose the right materials over the phone, via email, or social media, but we cannot diagnose the extent of your damage.
When it comes to structural damage, it can put a lot of lives at risk. The diagnosis is imperative, as is the choosing of the correct product from our extensive range. Is it a hairline crack? Or non-dormant structural damage? If a bridge were to collapse on your land, or worse an office block in the height of the working week, the financial and moral implications would be colossal. If you are even the least bit sure about which product to choose, give our Technical Support Team a call on0113 245 5450 (once you've spoken to an engineer).
Below are a small selection of the most commonly searched for products from this vast Structural Repair category - alternately, click a sub-category for full product and sub-category ranges:
Sikadur 330 is a two part, thixotropic epoxy based impregnating resin / adhesive. Used as impregnation resin for SikaWrap fabric reinforcement for the dry application method, primer resin for the wet application system and structural adhesive for bonding Sika CarboDur plates into slits. Features and Benefits Easy mix and application by...
Sika CarboDur E plates are pultruded carbon fibre reinforced polymer (CFRP) laminates, designed for strengthening concrete, timber, masonry, steel and fibre reinforced polymer structures. They are bonded onto the structure as externally bonded reinforcement using Sikadur 30 adhesive. Refer to the relevant Product Data Sheet for more detailed...
Sikadur Combiflex CF Adhesive Type N are thixotropic two part adhesives based on epoxy resins and fillers. They are part of the Sikadur Combiflex System and used to glue the Sikadur Combiflex SG Tape or the Sikadur Hypalon Strip to different substrates. Type N (= Normal Potlife).Easy to mix and apply - Excellent adhesion to many materials...
SikaWrap FX-50C is carbon fibre cord for the structural connection and anchoring of SikaWrap strengthening systems. It is a unidirectional carbon fibre cord, encased in a plastic sleeve, that serves as a fibre connector for the anchorage of SikaWrap fabrics. Features and Benefits Carbon fibre, corrosion resistant, durable...
Sika CarboDur M Type plates are pultruded carbon fibre reinforced polymer (CFRP) laminates designed for strengthening concrete, timber and masonry structures. They are bonded onto the structure as externally bonded reinforcement using Sikadur 30 structural adhesive. Features and Benefits Non corrosive Very high strength Excellent...
Sikadur 31 DW is a thixotropic, two part adhesive and repair mortar, based on epoxy resins and special fillers which has been specially formulated to meet the requirements for use in contact with drinking water. Features and Benefits Can be used in drinking water areas Easy to mix and apply Suitable for dry and damp concrete surfaces...
Sikadur 30 is a thixotropic, structural two part adhesive, based on a combination of epoxy resins and special filler, designed for use at normal temperatures between +8°C and +35°C for bonding Carbon Fibre & Steel reinforcement. Features and BenefitsEasy to mix and apply No primer needed High creep resistance under permanent load...
Sikadur 52 Injection Type N is a two part, solvent-free, low viscosity injection liquid, based on high strength epoxy resin. Type N (= Normal Potlife) is used for substrate temperatures between +5°C and +30°C (UK). Used as an injection resin with good adhesion to concrete, mortar, stone, steel and wood. Solvent-free Suitable for both, dry...
Sika FloorJoint S is a prefabricated, carbon-fibre reinforced polymer composite panel with high physical properties. Because of the waved joint design an improved load distribution is achieved. Ideal for new build and refurbishment of joints for concrete screeds with normal up to medium heavy wear e.g. for storage and assembly halls,...
SikaBond AT Universal is a one part, solvent-free, elastic adhesive with a very good adhesion on non-porous and porous substrates for the following applications:Internal and external bonding of cable channels, acoustic tiles, and door sills, lightweight construction materials, bonding of roof and wall coverings and cover plates etc....
SikaSwell A Profiles are acrylic, swellable joint sealing profiles and rings which swell in contact with water. Used to seal construction joints in watertight concrete construction, pipe and steel work penetrations through walls and floor slabs, etc.Easy to apply Can be applied on different substrates Highly economical Swells in contact...
Sikaflex Tank N (available in packs of 20x 600cc sausages) is a 1-part elastic sealant for joints exposed to chemicals used in areas for the storage, filling and handling of water polluting liquids such as:Floor joints in petrol stations, joints in handling areas, storage tanks and containment bunds, etc. High chemical resistance High...