Sub-category links
Filter By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
Tank coatings are used to line the internal and external surfaces of tanks storing varying materials - anything from drinking water to aviation fuel, and high acidic to alkaline chemical concentrations. Our online range offers the very best in storage vessel coating and tank lining solutions, providing the ultimate protection for tanks made from concrete, metal, plastics and more. We offer a wide range of products from many world leading manufacturers including Jotun, International, Sherwin-Williams and Sika.
Due to the specialist and bespoke nature of many of these products, we can offer a coating for almost any project and environment, covering application methods by brush, roller and spray, to a range of colours and film thicknesses to meet specification requirements. Most importantly our coatings and tank paints have been through rigorous testing to ensure they meet the most stringent requirements, so if your project requires certification to a particular standard whether it be British, American, German or otherwise, we’ll have a system to comply.
There are 9 products.
Active filters
Sherwin-Williams Macropoxy C251(formerly Epigrip C251) is a two-pack epoxy phenolic primer finish coating for use as part of a 2 coat system for the internal coating of storage tanks and vessels.Suitable for insulated external carbon or stainless steel surfaces including equipment and pipework Suitable for use at up to 180°C operating...
£258.08 (incl. VAT)
£215.07 (ex. VAT)
Sherwin-Williams Dura-Plate 301W is a low temperature curing, surface and humidity tolerant two-pack modified epoxy. It can be applied without dew point restrictions and over wet steel surfaces. Approved for Network Rail maintenance specifications, it can be used for both immersion and above the waterline service in marine, offshore,...
£118.70 (incl. VAT)
£98.92 (ex. VAT)
Sherwin-Williams Fast Clad ER is a solvent-free, epoxy tank lining that offers superior flexibility, excellent edge retention, film forming and high build properties. Fast Clad ER enables ultra fast return to service in as little as 24 hours.One coat protection Fast return to service Low VOC Low odour Dry to walk-on within four hours...
£0.00 (incl. VAT)
£0.00 (ex. VAT)
Sherwin-Williams Epo-Phen FF coating is a flake-filled (MIO) amine cured epoxy phenolic novolac formulated for use under thermal insulation at elevated or cryogenic temperatures and for immersion service in water and hydrocarbons such as gasoline, fuel oil, and diesel fuel. Temperature resistant to 218°C (425°F), constant; 232°C (450°F)...
£175.45 (incl. VAT)
£146.21 (ex. VAT)
Sherwin-Williams Macropoxy P100, formerly known as Pipegard P100, is a high build 2-pack polyamide cured epoxy zinc phosphate primer/finish. Macropoxy P100 is used as an internal flow coating for pipelines.High build Two pack Used as an internal flow coating for pipelines Please note: This product is made to order subject to a minimum...
£445.30 (incl. VAT)
£371.08 (ex. VAT)
Nova-Plate 325 is an amine cured, glass and ceramic filled tank lining that utilises advanced epoxy novolac technology. It provides quick return to service, high film build and can be used in applications where conventional tank linings are not recommended. Extends service life It is engineered to protect cargo and steel tank interiors...
£2,374.33 (incl. VAT)
£1,978.61 (ex. VAT)
Sherwin-Williams Dura-Plate UHS is a fast curing solvent free epoxy lining coating which rapid return to service and high build, edge retentive properties of tank lining provides superior protection compared to conventional approaches or alternative products. Dura-Plate UHS is the user friendly solution for use in tanks containing a wide range...
£521.64 (incl. VAT)
£434.70 (ex. VAT)
Sherwin-Williams Epo-Phen FF - Special Order coating is a flake-filled (MIO) amine cured epoxy phenolic novolac formulated for use under thermal insulation at elevated or cryogenic temperatures and for immersion service in water and hydrocarbons such as gasoline, fuel oil, and diesel fuel. Temperature resistant to 218°C (425°F), constant;...
£701.88 (incl. VAT)
£584.90 (ex. VAT)
Sherwin-Williams Dura-Plate UHS - Light Green is a fast curing solvent free epoxy lining coating which rapid return to service and high build, edge retentive properties of tank lining provides superior protection compared to conventional approaches or alternative products. Dura-Plate UHS is the user friendly solution for use in tanks...
£521.64 (incl. VAT)
£434.70 (ex. VAT)
Sub-category links
Filter By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
No matter how demanding the environment, tank lining and epoxy coatings are designed to cover specialist requirements within these key industries across the UK and Europe:
Rawlins Paints' range of tank lining products are suitable for a wide variety of industrial needs. Each product is available for large scale projects and will be delivered to many sites across the UK. Benefits from these specialist coatings include (product dependent):
Key products from International Paints’ protective coatings range, Interline, are available to buy today at Rawlins Paints, to deliver improved chemical and abrasion resistance to large chemical storage structures.
From Interline 955’s two component, heavy duty vinyl ester coating, which can be applied with standard airless spray equipment, to Interline 850, a high-build epoxy phenolic tank and pipe lining coating used to protect the internals of steel storage tanks and pipes, these specialist coatings can be found on many of the country’s leading processing plants.
International Interline 925 provides chemical resistance to a range of corrosive products, including crude oil, white oils and potable water. It is suitable for application over concrete for lining and secondary containment purposes.
International Interline 984 also delivers exceptional anti-corrosive protection to crude and refined petrochemicals, as well as biofuels. It is the ideal choice for use in storage tanks in downstream refineries and terminals, along with protecting ferrous and non-ferrous substrates.
Specialist coatings from Jotun’s Tankguard range can be used for transportation and long-time storage of a wide range of corrosive chemicals, internal linings for offshore, onshore and buried tanks and pipes, fire service lines and drilling mud tanks. Tankguard Plus is suited for storage and processing of heavy chemicals at high temperatures.
These coatings, product dependent, can be used as a primer, mid-coat or finish coat in atmospheric and immersed environments, delivering exceptional protection to a range of metals and related surfaces.
A selection, including Tankguard 412, can be used on crude oil and marine tanks. Jotun Tankguard Plus is a two component novolac epoxy coating which has been specially designed to offer chemical resistance as a tank lining.
For more information about the extensive range of Tankguard coatings from Jotun available here, please contact a member of our support team.
Our help and advice promise
If you need any advice or guidance with your tank coating project, call our Technical Team to discuss what product(s) will be best for you. Site visits can be carried out for larger projects so a full specification can be produced in writing, which will be tailored to meet the projects requirements. Data sheets and advice are always freely available to help you with your project.
