Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
There are 86 products.
Active filters
PPG SigmaGuard 720, a two-component, reinforced high solids tank coating, based upon polyamine adduct cured pure epoxy technology. The coating has recognized corrosion control (Lloyd`s Register) and short curing periods, .Tank coating with good chemical resistance against a wide range of chemicals Short curing periods and easy to clean...
£50.74 (incl. VAT)
£42.28 (ex. VAT)
PPG SigmaGuard 730 is a two-component, moisture-curing zinc-rich (ethyl) silicate tank coating. For use as tank coating or as a system primer in various paint systems based on unsaponifiable binders, with a high zinc content that results in excellent corrosion protection.Tank coating with excellent solvent and chemical resistance To be...
PPG SigmaGuard CSF 585 is a two-component, solvent-free, amine-cured epoxy tank coating for the storage of drinking water (approved by KIWA Holland) up to 60°C (140°F), for use with SIGMACOVER 522 primer. The coating meets NSF/ANSI Standard 61 for potable water when applied and used as described on nsf.org/Tank coating for drinking water...
£119.59 (incl. VAT)
£99.66 (ex. VAT)
PPG SigmaGuard CSF 650 (also known as Amercoat CSF 650), is a two-component, solvent-free, amine-cured epoxy tank coating for crude oil/ballast and aliphatic petroleum products, with one-coat protection for steel structures, ships and storage tanks with excellent corrosion resistance.Also suitable as a coating system for the storage and...
£561.72 (incl. VAT)
£468.10 (ex. VAT)
PPG Sigmaline 2000 is a two-component, solvent-free, amine-cured phenolic epoxy coating, a one-coat system for direct application to metal for pipe externals that is suitable for bell holing jobs.Resistant to well-designed cathodic protection Glossy and smooth appearance Can be applied by heavy-duty, twin-feed, hot, airless spray...
PPG Sigmaline 2500 is a two-component, solvent-free amine cured novolac phenolic epoxy, used as a one-coat system direct to metal for pipe internals and externals. The coating has excellent resistance to cathodic protection and resists crude oil up to 120°C (250°F).Glossy and smooth appearance Reduced explosion risk and fire hazard...
PPG SigmaPrime 200 is a universal epoxy anticorrosive primer based upon pure epoxy technology, a primer system that is suitable for ballast tanks, deck, topside, superstructure, hull, cargo oil tanks and cargoholds, with excellent anticorrosive properties and water resistance.Surface tolerant primer, with good chemical resistance Good...
£253.68 (incl. VAT)
£211.40 (ex. VAT)
PPG SigmaPrime 700 is a universal epoxy anticorrosive primer, based upon pure epoxy technology, suitable for Ballast Tanks, Decks, Topside, Superstructure and Hulls. The primer system has good adhesion to steel, galvanized steel and non-ferrous metals, curing at temperatures down to 5°C (41°F).Good abrasion resistance for dedicated areas...
£289.92 (incl. VAT)
£241.60 (ex. VAT)
PPG SigmaShield 460 is a two-component, high solids glass flake reinforced polyamine adduct epoxy coating for long-term protection at areas subject to heavy wear and tear, with very low water permeability, (due to glass flake barrier) and resistance to splash and spillage of a wide range of chemicals.Excellent abrasion and impact...
£380.52 (incl. VAT)
£317.10 (ex. VAT)
PPG SigmaShield 880GF, also known as Amerlock 880GF, a two-component, surface tolerant high solid glass flake epoxy coating designed for use in heavy-duty and corrosive environments for offshore splash zone maintenance.Outstanding sea water resistance - Excellent corrosion resistance Enhanced impact and abrasion resistance - Continues to...
£451.55 (incl. VAT)
£376.29 (ex. VAT)
Tikkurila Temaline LP Primer is a two-component, amine-adduct-cured epoxy paint. It is used as a primer and an intermediate coat in epoxy systems inside kerosene and oil tanks.Good chemical resistance. Withstands splashes and immersion in water and chemicals, such as aliphatic hydrocarbons, alkaline solutions and mild acids. Good...
£501.31 (incl. VAT)
£417.76 (ex. VAT)
Sherwin-Williams Dura-Plate UHS is a fast curing solvent free epoxy lining coating which rapid return to service and high build, edge retentive properties of tank lining provides superior protection compared to conventional approaches or alternative products. Dura-Plate UHS is the user friendly solution for use in tanks containing a wide range...
£521.64 (incl. VAT)
£434.70 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
No matter how demanding the environment, tank lining and epoxy coatings are designed to cover specialist requirements within these key industries across the UK and Europe:
Rawlins Paints' range of tank lining products are suitable for a wide variety of industrial needs. Each product is available for large scale projects and will be delivered to many sites across the UK. Benefits from these specialist coatings include (product dependent):
Key products from International Paints’ protective coatings range, Interline, are available to buy today at Rawlins Paints, to deliver improved chemical and abrasion resistance to large chemical storage structures.
From Interline 955’s two component, heavy duty vinyl ester coating, which can be applied with standard airless spray equipment, to Interline 850, a high-build epoxy phenolic tank and pipe lining coating used to protect the internals of steel storage tanks and pipes, these specialist coatings can be found on many of the country’s leading processing plants.
International Interline 925 provides chemical resistance to a range of corrosive products, including crude oil, white oils and potable water. It is suitable for application over concrete for lining and secondary containment purposes.
International Interline 984 also delivers exceptional anti-corrosive protection to crude and refined petrochemicals, as well as biofuels. It is the ideal choice for use in storage tanks in downstream refineries and terminals, along with protecting ferrous and non-ferrous substrates.
Specialist coatings from Jotun’s Tankguard range can be used for transportation and long-time storage of a wide range of corrosive chemicals, internal linings for offshore, onshore and buried tanks and pipes, fire service lines and drilling mud tanks. Tankguard Plus is suited for storage and processing of heavy chemicals at high temperatures.
These coatings, product dependent, can be used as a primer, mid-coat or finish coat in atmospheric and immersed environments, delivering exceptional protection to a range of metals and related surfaces.
A selection, including Tankguard 412, can be used on crude oil and marine tanks. Jotun Tankguard Plus is a two component novolac epoxy coating which has been specially designed to offer chemical resistance as a tank lining.
For more information about the extensive range of Tankguard coatings from Jotun available here, please contact a member of our support team.
Our help and advice promise
If you need any advice or guidance with your tank coating project, call our Technical Team to discuss what product(s) will be best for you. Site visits can be carried out for larger projects so a full specification can be produced in writing, which will be tailored to meet the projects requirements. Data sheets and advice are always freely available to help you with your project.
