Sub-category links
Filter By
Fastest Delivery
Fastest Delivery
For Use By
For Use By
Product Range
Product Range
Product Type
Product Type
Suitable For Use On
Suitable For Use On
Colour Family
Colour Family
Interior / Exterior Use
Interior / Exterior Use
Usages
Usages
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Application Method
Application Method
There are 60 products.
Active filters
Teamac Bilge & Locker Paint provides protection for the inside surfaces of the hull below the water line. A resilient and hardwearing single pack coating providing available in 5 colours.Hardwearing and resilient Single Pack formulation Use on inner hull walls Suitable for use on wood, metal and GRPCoverage Calculator More...
Teamac Mordant Solution (T Wash), is a pre-treatment for new galvanised steel to ensure adhesion of subsequent coatings. Satisfactory treatment will be shown by a colour change to dark grey throughout the whole surface. AdvantagesApplication: Brush, Dip, Roller Coverage: 40 Square Metres Per Litre Suitable For: Galvanised Metal...
Teamac Anti-Corrosive Finish QD, a quick drying, anti-corrosive primer and finish in one formulated for direct application to prepared steel and cast iron.Ideal for structural steel and metal fabrications. Durable Protective coating to metal surfaces Good coverage, up to 10 m2/litre Available in 2,500+ colours from RAL, BS, NCS and the...
Teamac Rust Converter, is an excellent product to stop the rusting process and allow rusty surfaces to be overcoated:Easy to apply, and ideal for marine and industrial applications Can be applied to rust in existing damp conditions Suitable for rusted iron or steel Application by brush, roller or airless spray To be overcoated with a...
Teamac Boot-topping, is an interface coating for use between the waterline and the deck coatings, provides a hard surface less receptive to marine growth and is polish-able to remove grime.Easy to apply Water and weather resistant Industrial grade marine coating Very hard wearing solid finishCoverage Calculator More Information...
Teamac Teamalak Yacht & Seaplane Varnish (previously known as Teamalak Yacht Varnish), is a high gloss, high quality traditional marine gloss, UV resistant varnish.Interior and exterior use Can be used over existing paintwork to increase gloss finish.Coverage Calculator More Information Delivery Info
Teamac 2 Pack Zinc Phosphate Primer, is a two pack, high performing epoxy zinc phosphate primer for application to steel which is clean and free from scale and/or rust.For application to blast cleaned and other suitably prepared steel surfaces Dry to recoat in as little as 2 - 4 hours Up to 12 square metres per litre coverage Not...
Teamac Metalastic Black Bituminous, is a high quality bituminous solution for marine, industrial and agricultural applications. It forms a waterproof, weatherproof, corrosion resistant coating for interior and exterior use.Multi-surface Gloss finish Indoor or outdoor Economical protection High Quality Bituminous Solution Weather and...
Teamac Protector II Antifouling is used as an antifouling coating for the underwater areas of vessels or underwater structures. Designed for vessels with a max speed of 25 to 30 knots. Expected functional life of the coating is 12 to 18 months.Contains cuprous oxide to give good antifouling performance Ideal for steel, wood, ferro...
Teamac Antifouling D Plus discourages the growth of barnacles, weed, and other water life on the underwater areas of marine vessels. Contains a high level of cuprous oxide and a blend of biocides to give good antifouling performance.Designed for vessels with a max speed of 25 to 30 knots Excellent antifouling performance 5 vibrant...
A modified chlorinated rubber primer for multipurpose use on steel, wood and GRP. Contains Zinc Phosphate for added protection on steel.Can be used as an underwater primer on prepared steel or as a sealer coat over most conventional systems Interior and exterior use Touch Dry: 30 minutes - Hard Dry: 6 hoursMore Information Delivery...
Teamac Marine Satin Finish, is a traditional high quality, modified long oil alkyd marine coating. It has a good resistance to oil and water and has been designed for use in a marine environment. Can be used where low reflection and glare is required such as boat roofs. Dries to a durable satin finish.A traditional satin finish for the...
Sub-category links
Filter By
Fastest Delivery
Fastest Delivery
For Use By
For Use By
Product Range
Product Range
Product Type
Product Type
Suitable For Use On
Suitable For Use On
Colour Family
Colour Family
Interior / Exterior Use
Interior / Exterior Use
Usages
Usages
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Application Method
Application Method
The name Teamac comes from a shortened version of the company name Teal & Mackrill Ltd. Mr Arthur Teal and Mr Harold Mackrill established the company in 1908, making it a limited company in 1913. The Teamac brand was registered in 1920. Mr Teal left the company in 1941 at the age of 73, leaving the Mackrill family in charge. Harold Mackrill remained as MD until his son Benjamin Mackrill took over in 1962. The company grew and thrived (including the acquisition of the Coo-Var brand in 1968) and in 1999 Benjamin Mackrill died, leaving his son – the third generation Mackrill as MD. Geoff still remains as MD today.
Today, Teal & Mackrill is famous for its high quality specialist marine and functional paints. The company supplies these coatings under the "Teamac" and "Coo-Var" brands throughout Europe. Teal & Mackrill has achieved both the ISO9000 and ISO14000 Quality and Environmental standards and has been recognised by being awarded a British Coatings Federation Environmental Award.
