- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Tool/Equipment Cleaners
Keep brushes, rollers, mixers and spray equipment performing at their best with professional Tool and Equipment Cleaners. These products are purpose-built to remove uncured paints, adhesives, resins, and sealants before they harden and ruin your tools. Unlike off-the-shelf solvents, specialist cleaners break down tough residues without softening bristles, corroding spray parts or leaving behind surface-dulling residues. They’re a crucial part of any preparation or clean-up routine - speeding up turnaround, preventing costly replacements and extending the lifespan of expensive application tools.
Intercoat Cleaning Solvent 01105
Intercoat Cleaning Solvent 01105 is a cleaning solvent suitable for most solvent-based coating materials and before using water-based products. For use as a solvent cleaner. For professional use only. More Information Delivery Info
Fosroc Equipment Cleaner
Fosroc Equipment Cleaner is for use with selected products within the Fosroc range. Used with selected products within the Fosroc Nitoseal range.
Acothane Thinner No.4
Cleaning solvent for use with applicable Acothane products.
Cromadex 06-55 Equipment Cleaner
Cromadex 06-55 Thinner, used for thinning specific Cromadex products and cleaning of application equipment. More Information Delivery Info
Osmo Brush Cleaner & Thinner
Osmo Brush Cleaner and Thinner, a premium quality brush cleaner and thinner that is more effective than cheaper alternatives at cleaning and thinning solvent-based products. Effective at cleaning solvent-based products from brushes and rollers Helps promote longevity of the bristles and fibres of brushes and rollers Perfect for removing...
Gunwash
Gunwash (OS Grade), for use with paint and coating products and accessories. Industrial use only. More Information Delivery Info
Ronacrete RonaDeck Low VOC Tool Cleaner/Trowel Finishing Aid
Low VOC biodegradable solvent for removal of uncured or partially cured resin from mixers and other tools, and to improve workability of surfaces. Low odour Not dangerous for transportation High flash point > 800°C Replacement for Acetone, Methylene Chloride etc. Removes partially cured resin More Information Delivery Info
HMG Guncleaner 401 2702
HMG Guncleaner 401 2702 is a general purpose cleaner for spray guns. Also suitiable for equipment based on reclaimed solvents.
HMG Guncleaner 302
HMG Guncleaner 302 is a general purpose cleaner for spray guns and equipment. Based on virgin solvents
Anker Stuy AW Glycol Cleaner
A professional and industrial-use cleaner for use with Anker Stuy wood coatings and products.
Tikkurila Pensselipesu - Tool Cleaner
Tikkurila Pensselipesu (Tool Cleaner), a solvent-free cleaning agent for cleaning painting equipment. For cleaning painting tools immediately after painting Used undiluted to remove oil paints, alkyd paints or lacquers, as well as waterborne dispersion paints from tools Pensselipesu Tool Cleaner will easily remove paint from e.g. brushes....
Axalta Gun Wash
Axalta Gun Wash is a blend of solvents designed to be used for the cleaning of spray equipment after use. Please Note: This product is available as Price On Application only
Cromar AlphaChem Foam Cleaner
Cromar AlphaChem Foam Cleaner is ideal for the easy and quick removal of fresh, uncured PU foam from applicator guns and nozzles. Can also be used to clean foam from surfaces, window and door frames and clothing. Shelf life of 24 months when stored in original, unopened packaging More Information Delivery Info
Tor Cleaning Solvent
Tor Cleaning Solvent (TH0) is a blend of dimethyly adipate, dimethyl glutarate and dimethyl succinate used for cleaning of solvent based and solvent free materials from application equipment.
Hempel Tool Cleaner 99610
Hempel Tool Cleaner 99610 is a blend of strong solvents for cleaning of tools that have been used for mixing or application of two-component epoxy products. Better cleaning properties than epoxy thinners, and does not contain chlorinated solvent For cleaning of brushes, paint rollers, spray equipment, and other tools which have been used...
109 Tool Cleaner
109 Tool Cleaner is a specialist equipment cleaner suitable for the removal of uncured epoxy, polyester and polyurethane resins. Low Hazard Low evaporation rate Excellent solvency powers 80% biodegradable This product is for Professional Use Only Images are for illustrative purposes only and may differ from the actual product More...
Tremco AW421 Industrial Cleaner
Tremco AW421 Industrial Cleaner is a powerful solvent-based cleaning solution for dissolving and removing mastics, adhesives and sealants. AW421 will remove many common adhesives and sealants, particularly in the uncured state. The product may also be used for cleaning and to degrease other surfaces that are not sensitive to solvents, such as...
Zinsser Brush Cleaner & Restorer
Removes dried-on paint from brushes, including shellac, solvent, and water-based paints. Fast-acting formula. No overnight soaking required. More effective than traditional mineral cleaners like white spirit. Contains powerful detergents for an ultra-clean finish.
Owatrol Transyl Releasing Oil Lubricant
Releases, penetrates, lubricates and cleans all surfaces, including plastic, metal, and rubber. Does not damage paint. Able to reach the most inaccessible areas. For the dismantling and maintenance of metal assemblies and for lubricating hard to reach metal parts. Widely used in the Automotive, Aviation, Rail and Maritime industries as...
Flowcrete Flowfast Cleaner
Clear product designed as a smoothing aid for Flowfast mortar coatings and for cleaning tools. For trowels and tools during application of Flowfast coatings and mortars. Solvent-free, low odour.
Sherwin-Williams Cleaner 26
Sherwin-Williams Cleaner 26 is a specially formulated blend of solvents designed for the cleaning of some surfaces prior to application of compatible coatings and/or cleaning of the application tools including brushes, roller and spraying equipment.
Sika Tooling Agent N
Sika Tooling Agent N is a water-based, solvent-free tooling agent for Sika's elastic sealants and adhesives. Tooling agent to create smooth finishes with Sikaflex sealants pH neutral Compatible with common surfaces No washing-out or etching of fresh applied sealants or adhesives Professional use only
SmartSeal Cleaning Fluid
Cleaning fluid for sprayers, rollers and brushes. Can be re-used up to 30 times.
Sika Hand Wipes
Sika Hand Wipes are specially designed to make the removal of uncured Sikaflex and SikaBond products from hands easy. They can also be used for removing uncured materials from tools and other surfaces, in this handy wipe form they allow for mess free cleaning and easy disposal. Each tub holds 100 wipes.
Zinsser Universal Degreaser & Cleaner
Water-based detergent. It can be used on tiles, grout, baths, sinks, showers, tools, equipment, machinery, driveways, BBQs, and ovens. Removes tough stains such as grease, oil, paint overspray, adhesive, wax, food stains, and more. Ideal for cleaning surfaces before painting, ensuring a smooth, residue-free finish. Suitable for both...
Krud Kutter Original Cleaner/Degreaser
Krud Kutter Original Cleaner/Degreaser is a concentrated cleaner, degreaser and stain remover that quickly and easily removes tough stains from many different surfaces. Water-based, it contains no petroleum solvents, bleach or ammonia. It cleans what ordinary cleaners simply can`t and is particularly good as a tile and grout cleaner. More...
Sikagard 112 Mortar & Brick Cleaner
Sikagard 112 Mortar & Brick Cleaner (formerley known as Sika Concrete Remover) is a highly concentrated, fast acting acid based formula which removes concrete waste and spillage. It also removes ingrained dirt and most paints on mineral surfaces such as brick, render and concrete. Removes concrete spills, waste and mortar Cleans...
Sika Wonder Wipes
Effective on hands, tools, and surfaces. Anti-bacterial. Contains aloe vera. Removes wet and semi-cured paint, sealant, adhesive, bitumen, expanding foam, oil, grease, and silicone. 100% biodegradable and environmentally friendly.
Need Help?
Need Help?
Professional Cleaners for Brushes, Rollers, Spray Guns & Tools
Tool and Equipment Cleaners play a vital role in coating application systems by removing contaminants before they cause system failure or defects. Spray equipment can clog and misfire when not properly flushed. Resin mixers and paddle blades seize up with hardened residue. Even brushes and rollers can become unusable after a single application if not cleaned promptly. These cleaning agents are designed to remove uncured and semi-cured material safely - without degrading metal, plastic or rubber components in the process.
Many specialist paint products are tailored to the chemistry of specific coatings. Polyurethane and epoxy systems often require specialist solvents that can dissolve heavy resins without excessive fumes or harsh effects. Silicone and bitumen cleaners are formulated to penetrate thick, sticky residues without affecting tool integrity. Industrial contractors using two-pack or fast-curing products will benefit from cleaners that offer longer working times or accelerated evaporation, depending on the job’s needs. Tool and Equipment Cleaners are not just cleaning solutions - they’re essential workflow products that prevent breakdowns, reduce waste and support professional standards.
Tool/Equipment Cleaners FAQ
Can I use these cleaners on dried paint or resin?
No. These cleaners are designed for uncured or soft-stage materials. For fully hardened coatings, mechanical removal is required.
Will these cleaners damage plastic or rubber tool components?
Only if used incorrectly. Many products are designed to be safe on common tool materials, but check each product’s technical data sheet.
Are these cleaners reusable?
Some are, especially those used in cleaning baths or pots. Always decant and filter as per product guidance.
How should leftover cleaner be disposed of?
These are usually classed as hazardous waste. Always follow local regulations or contact your waste management provider.
Are there low-odour options?
Yes. Some formulations are designed for indoor or sensitive sites with reduced solvent odour and VOC emissions.
Can they be used on power tools or electrical parts?
Only where specified. Most are not suitable for use on live equipment or exposed wiring.