Sub-category links
Established in 1975, Tor Coatings are one of the UK’s market leaders for specialist protective interior and exterior coatings for the building trade.
There are 73 products.
A fibreglass scrim giving much increased strength and flexibility when used as part of a system with Tor Aqualife TP Scrim Adhesive.Supplied in 1m x 100m packs To be used with Tor Aqualife TP Scrim Adhesive as part of a high performance anti graffiti system and an easy clean hygiene finish for the food and drink industriesMore...
£327.84 (incl. VAT)
£273.20 (ex. VAT)
Tor HB Micaceous Iron Oxide, a high build anti-corrosive coating for structural steelwork on structures such as cranes, bridges, gantries, tanks, etc.Apply by spray or brushBrush application will only achieve 45 to 70 microns dry film thickness2 colours available Touch dry in 2 hours Overcoat after 16 hours Micaceous oxide of...
£98.14 (incl. VAT)
£81.78 (ex. VAT)
A single pack high build primer for blast/manually cleaned steel. An excellent lead and chromate-free anticorrosive.Protective primer for steel A urethane alkyd binder with zinc phosphate anti-corrosive, together with inert inorganic pigments and thinned with low aromatic white spirit Good coverage - 6.45 square metres per litre Applies...
£340.69 (incl. VAT)
£283.91 (ex. VAT)
Tor Non-Tainting Bitumen Solution, used to coat steelwork such as water tanks, hay sheds, etc by brush, roller or airless sprayer, drying for recoating after 8 hours.General purpose bituminous paint Allow tanks 7 days drying before refilling with water, allowing to stand for 24 hours before discharge and then re-fill Ideal for farm...
£52.37 (incl. VAT)
£43.64 (ex. VAT)
Tor QD High Build Container Coating, a semi-gloss, quick-drying high build anti-corrosive primer finish for blast cleaned or mechanically cleaned mild steel. Use to paint containers/plant and equipment in a single coat application.Available in over 2,800+ colours in the RAL and BS range Ready for overcoating after 4 hours Application by...
£71.34 (incl. VAT)
£59.45 (ex. VAT)
Tor QD High Build Phosphate Primer, a quick drying high build anti-corrosive primer for blast cleaned or mechanically cleaned mild steel. Applied by spraying, the primer is touch dry in 1 hour and hard dry in 4 hours.Anti-corrosion protection for cleaned mild steel An alkyd resin binder with zinc phosphate anti-corrosive pigment, together...
£64.14 (incl. VAT)
£53.45 (ex. VAT)
Tor QD Thinner (TH19) is for the thinning (where necessary) of Tor Quick Drying Machinery Primers and Finishes and for the cleaning of the same materials from application equipment. Can also be used for degreasing metal components prior to painting. More Information Delivery Info
£42.61 (incl. VAT)
£35.51 (ex. VAT)
Tor Quick Drying Machinery Enamel finishes factory machinery, tools, agricultural implements, etc, applying by airless spray.Available in over 2,400+ colours from RAL and BS1L only available in colours mixed on a TR base - full colour selection for 5L sizeQuick dryingTouch dry in 30 minutes Hard dry after 2 hoursAn...
£22.81 (incl. VAT)
£19.01 (ex. VAT)
Tor Quick Drying Red Oxide Primer prepares steel components and fabrications for overcoating with compatible topcoats, dry and ready in just 1 hour. Can be applied by brush, short pile roller or airless spray.An alkyd binder pigmented with inert inorganic pigments and thinned with an aromatic hydrocarbon solvent blend Not suitable for use...
£55.84 (incl. VAT)
£46.53 (ex. VAT)
Tor Raincoat APA (RC353) is a single pack coating based on a specially modified acrylic resin system containing anti-corrosive pigments and inert extenders.Adhesion promoting Anti corrosive intermediate coating For use in conjunction with Raincoat roof coatings and cladding finishes over PVDF and other plastic coated substrates...
£116.96 (incl. VAT)
£97.47 (ex. VAT)
The new Tortrim range has been developed to provide detail plastic trims to produce a neat edge to Tor roof systems. Bond It PU18 is a one part moisture curing polyurethane fast grab adhesive/sealant for bonding trim pieces together. More Information Delivery Info
£51.80 (incl. VAT)
£43.17 (ex. VAT)
Tor SP Stabilising Sealer is a low viscosity alkali resistant solution for binding/stabilising friable and highly porous masonry surfaces prior to finishing in conventional masonry paints, and as a sealer/surface stabiliser on bare concrete floors prior to finishing in Tortread SP Floor Paints.Urethane alkyd resin solution in low aromatic...
£49.54 (incl. VAT)
£41.28 (ex. VAT)
Established in 1975, Tor Coatings are one of the UK’s market leaders for specialist protective interior and exterior coatings for buildings. Their high performance and technically advanced liquid coatings are very popular as being both decorative and protective across a wide range of surfaces – including waterproofing roofs and balconies.
Tor Coatings offer a fantastic range of protective products for a variety of needs – from fire protective to waterproofing coatings, and anti-graffiti solutions to hygienic coatings that work to protect surfaces from harmful bacteria.
Rawlins Paints are proud distributors of Tor Coatings, and are available to offer full technical and application support across their expanding portfolio.
Tor Coatings, as leading protective coating specialists, cater for both the private and public sector, along with designing products to meet commercial needs within retail and industrial markets.
For internal and external purposes, these protective coatings for use within the building industry are applicable for walls, ceilings, roofing, cladding, fire protective upgrades, walkways, and more.
In an ever-competitive market, Tor Coatings have focused development and manufacturing of their innovative protective coatings for the building trade, with advanced liquid waterproofing systems that offer up to 25 years’ protection.
Buildings with large communal areas are catered for with specialist fire retardant paints which carry the globally recognised Certifire marque.
Rawlins Paints offer full product and technical support across Tor Coatings’ range of products, so if you are a building manager, surveyor, architect or business owner, get in contact with us today to find out how Tor Coatings may be the best paint specialist manufacturer for your needs.
