Sub-category links
Filter By
For Use By
For Use By
Fastest Delivery
Fastest Delivery
Suitable For Use On
Suitable For Use On
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Usages
Usages
Product Type
Product Type
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Anti-Slip Texture
Anti-Slip Texture
Application Method
Application Method
Min. Application Temperature
Min. Application Temperature
Size
Size
Rawlins Paint's range of two-component floor primers improve the adhesion between substrates and coatings, particularly on difficult surfaces (such as power-floated concrete). For use in industrial and commercial businesses such as factory floors, car showrooms, workshops, warehouses and anywhere that requires a durable and hard-wearing floor coating susceptible to mechanical loads.
Our wide variety of two-component floor primers includes products that allow same-day application and top-coat application, reducing inconvenience and disruption for businesses, and for priming damp concrete floors and screeds to allow earlier application of floor coatings. Bradite Floor Primer is ideal for use around food such as in kitchens, processing and packing plants.
Our Technical Support Team are on hand to advise on the best solution for your needs - contact them on 0113 2455450 (option 2) or send a message to [email protected].
There are 83 products.
Active filters
PPG Nu-Klad Imp is a two-component, solvent-free, impregnating epoxy floor primer.Primer for NU-KLAD floor coating systems Excellent impregnating properties (penetration and saturation of the concrete)More Information Delivery Info
Remmers Epoxy BS 2000 is a pigmented, water emulsifiable epoxy resin for versatile use, used as a primer or adhesion promoter in the Remmers Water Vapour Diffusion-Open System.Low odour Resistant to alternating frost/thaw cycles Ideal for warehouses, garages and car parks Excellent adhesion on many substrates Contains no plasticisers,...
Remmers Epoxy BS 2000 Transparent is a water emulsifiable, epoxy resin for versatile use, used as an impregnation agent or adhesion promoter in surface protection systems.It can be used as a bonding layer worked wet-on-wet in combination with levelling compounds or epoxy resin systems Ideal for warehouses, garages, parking garages,...
A 2-component primer for porous, bare, concrete, sand and cement screeds, bricks and blockwork that is ready to be over coated in only 4 hours.For priming bare, porous, or open textured surfaces prior to applying a high build floor finish Ready to be over coated in only 4 hours Virtually solvent free two pack epoxy resin – safe for use...
Primes and seals newly laid concrete for early painting. Suitable for areas subject to heavy traffic.Withstands 98% relative humidity Saves waiting for new concrete to dry out Can be applied to damp surfaces Overcoat in just 16 hours Can be used with underfloor heating systemsNote: While great care is taken with the colour...
Primes and seals porous, dusty floors prior to painting, for use with Watco specialist polyaspartic coatings.Primes and seals porous, dusty floors prior to painting Can be used at -10°C to +25°C Ready to overcoat in 4 hours Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Use with the following Watco products: Cold...
401 Epoxy Floor Primer is a two pack, water dispersible epoxy based primer/sealer/clear coating, especially formulated to meet the technological and ecological requirements of modern building and industrial practice. Ideal for use as a clear sealer on concrete and masonry surfaces.Also available in 4,000+ colours from RAL, BS, NCSSee...
401 WG Epoxy Floor Primer is a fast curing, two pack, water dispersible epoxy based primer/sealer/clear coating, especially formulated to meet the technological and ecological requirements of modern building and industrial practice. Designed be used in lower temperatures or when rapid overcoating/access is required.Excellent adhesion to...
402 Damp Proof Coating is a two pack epoxy resin based primer/coating, which has been developed to function as a residual construction moisture suppressant, allowing the early installation of moisture sensitive flooring in fast track building programmes.Also available in 4,000+ colour options from RAL, BS and NCSPlease see 402 Damp...
402 WG Damp Proof Coating has been developed to function as a rapid curing, residual construction moisture suppressant, to allow the early installation of moisture sensitive flooring in fast track building programmes. Designed to be used in lower temperatures or when rapid overcoating/access is required.Also available in 4,000+ colour...
Allows hard to clean, contaminated surfaces, such as concrete floors, to be painted. Ideal for garage-and-machine workshop floors, factories and warehousesTwo part epoxy primer Seals in grease and oil and makes a good base for painting Seals and binds weak, porous surfacesMore Information Delivery Info
High strength 100% solids epoxy resin adhesive primer, with sub-zero option for use at low temperatures.For use with Watco Concrex Makes shallow or intricate repairs easier Overcoat in 30-60 minutes Cures at 0°C Suitable for use on concrete and metalNote: While great care is taken with the colour samples shown, no guarantee can...
Sub-category links
Filter By
For Use By
For Use By
Fastest Delivery
Fastest Delivery
Suitable For Use On
Suitable For Use On
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Usages
Usages
Product Type
Product Type
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Anti-Slip Texture
Anti-Slip Texture
Application Method
Application Method
Min. Application Temperature
Min. Application Temperature
Size
Size
