Sub-category links
Filter By
For Use By
For Use By
Suitable For Use On
Suitable For Use On
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Product Usage Type
Product Usage Type
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Anti-Slip Texture
Anti-Slip Texture
Application Method
Application Method
Min. Application Temperature
Min. Application Temperature
Fire Rating
Fire Rating
Average Application Thickness
Average Application Thickness
Chemical Resistance
Chemical Resistance
Size
Size
There are 134 products.
Active filters
Axalta ViterShield GPL Epoxy Floor Coating is a two-pack epoxy semi-gloss finish for use on floors, steelwork and bund walls.Use as a floor coating, or as a chemically resistant finish over suitable systems such as appropriate ViterShield epoxy primers Suitable for urban, industrial and marine environments and is suitable for immersion...
£93.38 (incl. VAT)
£77.82 (ex. VAT)
Axalta Floorcote AQ200 is a two pack, water-based epoxy floor coating for use on a range of substrates.Suitable for application where low odour and minimum solvent content are important, such as schools, hospitals and public buildings Excellent abrasion resistance, adhesion and chemical resistance Low VOC - 3g/litre (varies with colour)...
Axalta ViterFloor 400 SF Floor Primer/Sealer is a two pack epoxy, solvent free clear primer/sealer for concrete floors.A clear primer/sealer for new and old concrete floors Use as a primer/sealer under ViterFloor 300 and ViterShield GPL, and as a clear sealer for bare concrete floors to prevent dusting and dirt contamination Resistant...
£374.33 (incl. VAT)
£311.94 (ex. VAT)
Axalta ViterFloor 300 SF Epoxy Floor Coating is a two pack epoxy, solvent free, high build coating for concrete floors.For new and old concrete floors subject to heavy mechanical wear and/or chemical attack, in areas such as the food processing, brewing, pharmaceutical and heavy engineering industries High gloss, easily cleaned finish...
£261.41 (incl. VAT)
£217.84 (ex. VAT)
Fosroc Nitoflor FC130 is a two-component water based epoxy resin floor coating system supplied in pre-weighed packs ready for on-site mixing and use. Suitable for use on concrete and asphalt substrates including walls and floors in warehouses, garages, light industrial and food processing areas, kitchens and other areas of pedestrian and...
£215.98 (incl. VAT)
£179.98 (ex. VAT)
Resichem 590 Epoxy F C is a two pack solvent free epoxy floor coating system which provides protection and decorative properties to concrete. After mixing the coating provides a hard wearing gloss finish epoxy coating is produced. Typical applications include factory floors, warehouse floors, food preparation areas, brewery floors,...
£928.80 (incl. VAT)
£774.00 (ex. VAT)
Resichem 593 Epoxy AS is an epoxy based coating system suitable for use in areas where a resistance of less than 10⁸ ohms is required as a measure to control static electricity. After mixing, an easily applied chemical and abrasion resistant finish is produced which is hygienic and easy to clean. Typical applications include factory floors,...
£324.00 (incl. VAT)
£270.00 (ex. VAT)
A high performance, water dispersible epoxy coating in 4,400+ colours for the protection and decoration of floors and walls.Readily available standard colours also available here Available in Smooth and Anti-Slip* options*250 micron grade of 508 Anti-Slip Additive will be added at 2.4% prior to receiptEnvironmentally friendly...
£86.40 (incl. VAT)
£72.00 (ex. VAT)
303 WG Epoxy Floor Paint is a fast curing, high performance, water dispersible epoxy coating for the protection and decoration of floors and walls. It is designed to be used in lower temperatures or when a fast return to service is required.Fast curing even at lower temperatures May be applied to dry or damp surfaces Available in 4,400+...
£120.00 (incl. VAT)
£100.00 (ex. VAT)
304 WG HD Epoxy Floor Coating is a two-pack solvent-free high-build epoxy resin system that offers shorter drying times in lower temperatures or when a fast return to service is required, for application as a heavy duty floor coating for concrete, steel and other substrates.Available in 4,400+ colours, inc. RAL, RAL Design, BS, NCS &...
£104.40 (incl. VAT)
£87.00 (ex. VAT)
310 Chemical Resistant Coating is a rapid curing, two pack, solvent free epoxy coating with outstanding resistance to aggressive acids, solvents and alcohols.Available in 4,400+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours Readily available standard colours also available here Excellent chemical resistance to...
£150.00 (incl. VAT)
£125.00 (ex. VAT)
307 Flexible Deck Coat is a two-pack solvent free resin coating modified to impart toughness, resilience and waterproofing properties to the cured film on concrete, tarmac and asphalt substrates. It is an ideal material for use as a membrane subjected to vehicular traffic.Available in 4,400+ colours, inc. RAL, RAL Design, BS, NCS & the...
£108.00 (incl. VAT)
£90.00 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Suitable For Use On
Suitable For Use On
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Product Usage Type
Product Usage Type
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Anti-Slip Texture
Anti-Slip Texture
Application Method
Application Method
Min. Application Temperature
Min. Application Temperature
Fire Rating
Fire Rating
Average Application Thickness
Average Application Thickness
Chemical Resistance
Chemical Resistance
Size
Size
Many of our heavy use concrete floor paints are also suitable for cement, stone, metal, tarmac and asphalt surfaces, amongst others, and each product comes with a data-sheet offering further information. Many are also fast curing and flexible. If your bare and newly installed concrete flooring needs tough and abrasion resistant paint, you will be able to find the perfect paint for the job at rawlinspaints.com
The concrete floor paints in this section are ideal for: Warehouses, store-rooms, boiler rooms and facilities, factory units – food and beverages, heavy-load machinery, manufacturing plants – showrooms, school corridors, cold storage rooms, garages, workshops and more.
Epoxy floor paints are most commonly used in heavy-duty and industrial facilities, where a tougher coating, with improved abrasion resistance is a necessity. These paints are supplied in two liquid components (an epoxy resin and a hardener). They must be mixed together directly before application as a floor coating (full proportional measurements are provided with each product) and most can be applied simply by brush or roller. The coating will dry to leave a smooth finish, but paint additives can be added to create a gritted and anti-skid surface – as often found in frequently wet areas in food processing plants that generate a lot of steam – such as oven chips, soups and tinned cooked meat. Full technical and application support is available from Rawlins Paints.
Epoxy floor paints provide an economical solution to a hard-wearing floor coating that are simple to apply and give a wide choice in colour that can be easily applied.
These are areas where medium to heavy vehicular use is a daily thing and the floor surfacing must be able to withstand oil, petrol and other chemical spills, without eroding through or corroding the floor paint. The surface may preferably need to be self-levelling, for health and safety reasons, or for easier transportation of sensitive equipment around the work-space.
As garage and workshops frequently have access doors open during working hours, the floor coating will need to be able to withstand excessive sun and UV exposure. For the other seasons, it’ll also need to stand up to rain, sleet and snow falling/dripping off cars, vans, pallet-trucks and lorries that are brought in for repair. It’s not always possible to clean up mild chemical spills under vehicles, or rain/snow, so the heavy-duty floor coating will need to be resistant to these chemicals – especially salt from rain water – which can cause a lot of damage to concrete and brick.
Many garages and workshops have floor marking for parking bays and equipment zones. Rawlins Paints also sell a wide range of line marking paints and tapes, ideal for this.
Warehouses, such as those found in major supermarkets and retail outlets, often have stock that stands still for large seasonal periods of time. Storage trolleys and cages may require a non-slip, finish for staff to safely manoeuvre them from the shop-floor back into storage. They will also need to regularly undergo strict health and safety checks for damage and hygiene properties. It is not enough to wear suitable shoes and the floor surface must be able to withstand damage from dropped stock, forklift truck access and heavily stacked items – such as heavy-duty metal garden equipment.
All warehouses will have delivery bays, where the interior flooring will be exposed to harsh weathers, as well as delivery truck access. For these purposes, specific heavy-duty floor paints by Coo-Var, Jotun, Mathys, Sika and Rust-Oleum will be suitable.
Whilst it is procedure to use appropriate transportation equipment to move around gas bottles or liquid filled drums, they will frequently need to be jimmied into place, and this can cause friction damage. The heavy-duty floor paints available at Rawlins Paints can withstand many types of ‘pressure abuse’ from large and heavy objects.
Whilst the definition of a factory is standard, the types of goods processed, built or developed in one will cover an incredible range. From major car brand manufacturing plants, to factories processing or packaging foods, each will have bespoke and top-of-the range technical equipment. The contact point of an object with the floor must be of optimal quality – not only for insurance or health and safety reasons, but for longevity too.
These types of plants have high pedestrian traffic, often accessed 24/7 by staff, and will therefore need to be cleaned a lot. Many of these environments will use industrial cleaning equipment, so the floor coating must be chemical resistant. Rawlins Paints also stock damp-proof coatings which are ideal for situations where the substrate may have residual moisture from either being freshly laid or through lack of a DPM (Damp Proof Membrane). Perfect for new build or old building renovation.
Typically used by professional, experienced applicators due to their extremely short working time. MMA coatings are ideal for many aspects of exterior and car park coating and marking, as well as being used on specific internal projects MMA paints can be applied over worn-out and degraded thermoplastic road markings (ensure the surface is sound before application). Often the preferred system for heavy-use motorway junction road markings – see also pedestrian crossings, yellow boxes and stop/yield areas.
Most MMA (methyl-methacrylate) products can be used on bituminous, concrete and paved surfaces and cure for FULL use in as little as 1 hour and can cure down to temperatures as low as -20°C!
Polyurethane paints are usually chosen for their high gloss finish, excellent UV, weather and chemical resistance, as well as being ideal for industrial sectors where a hygienic floor coating is required – high moisture/high humidity environments. Sika offer a particularly good polyurethane range of coatings with some of the industry’s best self-levelling systems.
As with all paints in our online store, we recommend reading the data-sheets provided, as each paint will offer different qualities to a job. There is no one paint that does all jobs, and for some projects polyurethane coatings will be ideal – with several different brands providing polyurethane paints at rawlinspaints.com, please contact us for further support, if required.
Painting floors with high-quality commercial or industrial coatings is much more cost effective and less disruptive to a project than using cheaper substitutes. Larger projects require some form of ‘guarantee’ for the client and/or building owner to provide peace of mind that the coating system applied to internal or external flooring will last for an agreed period of time - if correctly maintained.
Using our products, it is possible to decorate and protect concrete, tarmac, asphalt, wood or metal floors, both improving its life expectancy for greater periods of times, and delivering waterproofing and protective properties that can lower the risk of major repair and costly maintenance work. Achieve long-lasting results, with the wide range of floor paints and coatings available at Rawlins Paints today.
We offer systems that are available in virtually any colour and finish - including colour matching existing decorative or company colour schemes - in our light to medium (pedestrianised) right up to heavy use (light to medium vehicular activity) coatings for a wide range of interior or exterior substrates and surface materials.
A trained member of our Technical Support Team will visit your site and carry out a full inspection, write a tailored specification to meet your requirements and offer an approved contractor for the application. We will never offer a contractor that we have not trained and approved, all our contractors have successfully completed specific product training on the systems they apply and are monitored regularly to ensure the highest standard of quality is achieved.
By using one of our nationwide approved contractors for our products you enable yourself to take advantage of our guarantees, life expectancies and warranties. This means if we say our system is going to last a certain amount of time, or perform in a certain way and it doesn’t, you’re covered.
If you’re a contractor and would like to become an approved installer of our systems please contact us on 0113 245 5450
