Filter By

Sherwin-Williams Acrolon C137V2

Sherwin-Williams Acrolon C137V2 (formerly Resistex C137V2) is a high performance, fast drying acrylic urethane gloss finish for use where long term exterior gloss and colour retention characteristics are required. Acrolon C137V2 is suitable for use as a final coat(s) in conjunction with epoxy or polyurethane based protective systems for new...

Price £71.95 Regular price £79.94
In stock

Thermoguard Thermocoat W

Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:  Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...

Price £46.80 Regular price £52.00
In stock

Zinsser B-I-N

The ultimate performance shellac-based primer-sealer and stain killer for interior and spot exterior use. Offers unparalleled adhesion to glossy surfaces (including glass) without the need for scuff sanding and blocks stubborn and persistent stains. Available in more than 90 colours from RAL and BS shades (1L, 2.5L, 5L only). • Ultimate...

Price £37.25 Regular price £43.21
In stock

Rust-Oleum 7100NS Anti-Slip Floor Coating

Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating: For foot traffic, interior and exterior Anti-slip additive is premixed in the coating For use on old concrete (>2 yrs), metal and wood Unique uniform appearance, high gloss Touch dry: 6 hours, coverage: 8m² per litre Available in...

Price £34.36 Regular price £38.18
In stock
All sale products

Need Help?

Two Pack

There are 50 products.

Showing 1-12 of 50 item(s)

Active filters

PPG SigmaZinc 160

PPG SigmaZinc 160 is a two-component, moisture-curing inorganic zinc (ethyl) silicate anti-corrosive primer for structural steel. This low-temperature curing coating is suitable as a system primer in various paint systems based on unsaponifiable binders. Galvanic action eliminates sub-film corrosion Can withstand substrate temperatures...

Price £68.46
In stock

PPG SigmaShield 2

SigmaShield 2, previous known as Amerlock 2 GF, is a two-component, high solids glass flake reinforced polyamine cured epoxy coating that is suitable for immersion. Designed for long-term protection at areas subject to heavy wear and tear, with excellent abrasion, corrosion and impact resistance. Low-temperature curing down to 0°C (32°F)...

Price £458.20
In stock

PPG SigmaShield 400

SigmaShield 400, formerley known as Amerlock 400 GF, is a two-component, high solids polyamine adduct cured epoxy coating, designed to prevent corrosion under insulation (CUI) of carbon steel and stainless steel. Glass flake reinforced for improved impact and abrasion resistance. Pass cryogenic cyclic test from -196°C (-321°F) to 200°C...

Price £303.00
In stock

PPG SigmaCover 2

SigmaCover 2, also known as Amerlock 2, a high-solids high performance self-priming low-VOC universal epoxy coating for substrates including carbon steel, concrete, masonry, galvanised steel, non-ferrous metal and stainless steel. The coating has numerous qualifications, including for nuclear service, flame spread, subsea surfaces and potable...

Price £51.60
In stock

PPG SigmaCover 350

SigmaCover 350 is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating available in 350+ colours for wide use in Marine and Protective Coatings such as topsides, decks, superstructures and cargo holds. Surface tolerant primer/coating for use on steel and concrete Good impact and abrasion resistance, with excellent...

Price £37.56
In stock

PPG SigmaCover 350 LT

SigmaCover 350 LT is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating that cures at temperatures down to -5°C (23°F), available in 350+ colours for wide use in Marine and Protective Coatings such as topsides, decks, superstructures and cargo holds. Surface tolerant primer/coating - Good impact and abrasion...

Price £356.80
In stock

PPG SigmaCover 400

SigmaCover 400/Amerlock 400, a two-component, high solids, high performance self priming universal epoxy coating for steel and concrete, galvanising, stainless steel and non-ferrous metals, with low VOC. The coating has good adhesion on existing coats, compatible with prepared, damp surfaces, and has many qualifications including Nuclear...

Price £79.72
In stock

PPG SigmaCover 522

PPG SigmaCover 522 is a two-component, micaceous iron oxide-pigmented, polyamide-cured epoxy primer/sealer/coating. It has excellent adhesion to, and sealing of, weathered, cleaned, zinc-rich primers and metal-sprayed steel, with good adhesion to properly pre-treated galvanized steel. Can be used in systems for atmospheric or water-immersed...

Price £36.18
In stock

PPG SigmaCover 805

PPG SigmaCover 805 is a two-component, high solids polyamine adduct cured epoxy coating for direct application to metal for excellent corrosion resistance and outstanding resistance to water and seawater. Very good surface wetting - Resistant to well-designed/controlled cathodic protection Good resistance against chemically polluted water...

Price £163.50
In stock

HMG Acrythane XSC21

HMG Acrythane XSC21 (Base) is a premium quality, high solids 2K acrylic cured with isocyanate hardener with outstanding properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane XSC21 Hardener (Part 2) HMG...

Price £30.69
In stock

HMG Acrythane XSC21 Clear

HMG Acrythane XSC21 Clear is a premium quality, high solids 2K Acrylic cured with isocyanate hardener with outstanding properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane XSC21 Clear Hardener (Part 2)...

Price £25.52
In stock

HMG Acrythane SC601 Colours

HMG Acrythane SC601 Colours (Base) is a standard high solids 2K acrylic cured with isocyanate hardener with outstanding properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane SC601 Colours Activator (Part 2)...

Price £26.10
In stock