Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard (London) for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants...
Sherwin-Williams Acrolon C137V2 (formerly Resistex C137V2) is a high performance, fast drying acrylic urethane gloss finish for use where long term exterior gloss and colour retention characteristics are required. Acrolon C137V2 is suitable for use as a final coat(s) in conjunction with epoxy or polyurethane based protective systems for new...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating: For foot traffic, interior and exterior Anti-slip additive is premixed in the coating For use on old concrete (>2 yrs), metal and wood Unique uniform appearance, high gloss Touch dry: 6 hours, coverage: 8m² per litre Available in...
Up to 250°C
Heat Resistant Paint disclaimer:
It is important before choosing your heat resistant paint to distinguish the differences clearly between heat resistant paint and fire retardant paint.
Heat Resistant Paint
Heat Resistant Paint prevents:
Heat Resistant Paints also protect from corrosion and exposed environments, though this does vary from product to product.
Fire Retardant Paint
Fire Retardant Paint prevents:
Example: Christmas Tree
The sub-categories within the 'Heat Resistant Paints' section allow users to filter by the temperature up to which they need protection. These are to be used as a GUIDE ONLY, as there will be instances where a product will be able to achieve higher protection on certain section sizes but not others.
For further product, project and pricing support, we ALWAYS recommend you contact our Technical Department before purchase and use.
Heat and fire protection does not have to be like reading between blurred lines, let our technical staff help you get the level of protection you require and the finish that you want.
If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.
Jotun Solvalitt Midtherm Alu is an aluminium pigmented version of the standard Solvalitt Midtherm producing a metallic silver finish. A one component physically drying silcione acrylic coating that is heat resistant up to 260°C. It can be used as a primer, mid coat or finish coat in atmospheric environments. Coverage Calculator
Jotun Aluminium Paint H.R. is a one component styrene modified oxidatively drying alkyd coating that is heat resistant up to 250°C. It can be used as an exterior aluminium finish usually within an alkyd system. Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel and aluminium...
International Intertherm 875 is a single component, intermediate temperature finish for use in a wide range of industrial environments as a heat resistant finish coat for application over properly primed steelwork in both new construction and as a maintenance coating at temperatures up to 260°C (500°F). Coverage Calculator
International Intertherm 891 is a one component, general purpose heat resistant paint for use as a heat resistant coating for general site use or as an industrial maintenance coating on both ambient and high temperature steelwork up to 315ºC (600ºF) where an economical aluminium finish is required. Coverage Calculator
Jotatemp 250 is a two component glass flake reinforced epoxy composite coating. It is heat resistant up to 250°C (482°F) and can be applied on hot substrates up to 150°C (300°F). Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and...
Cromadex 475 Heat Resistant (up to 250°C) Primer Finish is a black heat resistant primer finish suitable for items reaching temperatures of up to 250°C. The product has a fast touch dry time helping to improve productivity. It has excellent covering power helping to reduce application costs.
Rust-Oleum Hard Hat 2180 Galva Expresse is a heat-resistant up to 350°C, super-fast zinc rich primer containing pure zinc as pigment to provide excellent protection against corrosion. Should be used on new, bare steel or galvanised steel surfaces as a primer or as a single coat finish in light industrial exposures, corrosive environments and...
Rust-Oleum Hard Hat 2185/1085 Galva Zinc is the No.1 high zinc content coating providing superior protection and durability for metals exposed to the elements or adverse artificial conditions. Can be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas. 90% zinc content, touch dry...