Sherwin-Williams Acrolon C137V2 (formerly Resistex C137V2) is a high performance, fast drying acrylic urethane gloss finish for use where long term exterior gloss and colour retention characteristics are required. Acrolon C137V2 is suitable for use as a final coat(s) in conjunction with epoxy or polyurethane based protective systems for new...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
The ultimate performance shellac-based primer-sealer and stain killer for interior and spot exterior use. Offers unparalleled adhesion to glossy surfaces (including glass) without the need for scuff sanding and blocks stubborn and persistent stains. Available in more than 90 colours from RAL and BS shades (1L, 2.5L, 5L only). • Ultimate...
Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating: For foot traffic, interior and exterior Anti-slip additive is premixed in the coating For use on old concrete (>2 yrs), metal and wood Unique uniform appearance, high gloss Touch dry: 6 hours, coverage: 8m² per litre Available in...
Up to 400°C
Heat Resistant Paint disclaimer:
It is important before choosing your heat resistant paint to distinguish the differences clearly between heat resistant paint and fire retardant paint.
Heat Resistant Paint
Heat Resistant Paint prevents:
Heat Resistant Paints also protect from corrosion and exposed environments, though this does vary from product to product.
Fire Retardant Paint
Fire Retardant Paint prevents:
Example: Christmas Tree
The sub-categories within the 'Heat Resistant Paints' section allow users to filter by the temperature up to which they need protection. These are to be used as a GUIDE ONLY, as there will be instances where a product will be able to achieve higher protection on certain section sizes but not others.
For further product, project and pricing support, we ALWAYS recommend you contact our Technical Department before purchase and use.
Heat and fire protection does not have to be like reading between blurred lines, let our technical staff help you get the level of protection you require and the finish that you want.
If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.
Rust-Oleum 4200 Heat Resistant Primer (orange in colour) provides heat resistance up to 425°C dry heat on metal substrates, including application on boiler fronts, incinerators, stacks, breechings, kilns and similar surfaces subject to high temperatures and rust producing conditions. Also known as 4268 Heat Resistant Primer. Withstands...
Rust-Oleum 4200 is a heat resistant aluminium finish topcoat providing heat resistance up to 425°C which should be applied over surfaces primed with Rust-Oleum 4200 Heat Resistant Primer. Withstands continuous exposure to temperatures of up to 425°C Long-term gloss retention Nice aluminum finish Single pack, easy to apply One coat is...
Teamac High Temperature Aluminium Paint. A high quality enamel for use at temperatures up to 450°C indirect heat. Advantages Ideal for use in areas prone to heat Can be used as a single coat for fire surrounds, radiators, hot pipes and more Click to jump down to Technical Data Coverage Calculator
Jotun Solvalitt Zinc is a one component physically drying zinc rich silicone coating that is heat resistant up to 400°C. It can be used as a primer in atmospheric environments and suitable for properly prepared carbon steel substrates. Coverage Calculator
International Intertherm 50 is a single component, high temperature coating, suitable for temperatures up to 540°C (1004°F) for the protection of steel from corrosion on areas including flare stacks, chimneys, exhausts, vents and pipework, etc. Coverage Calculator
International Intertherm 181 is a two component, high temperature resistant topcoat based on inorganic silicate technology. Specifically designed for application over inorganic zinc primers, which provides a single specification to be used for the protection of all pipework from corrosion at continuous operating temperatures up to 400°C...
International Intertherm 751 CSA is a high performance coating that is applied using standard application equipment and cures effectively at ambient temperatures. Capable of providing corrosion protection to steel in both atmospheric service and under thermal insulation operating in thermal cyclical conditions between -196°C (-321°F) and 400ºC...
Jotun Jotatemp 540 Zinc is a two component glass flake reinforced inorganic zinc ethyl silicate coating. It conforms to the compositional requirements of SSPC paint 20, level 3, ISO 12944-5 and AS/NZS 3750.15. It provides corrosion protection as a single coat and can be used under insulation if overcoated with a high temperature coating...
Cromadex 495 High Temperature Resistant (up to 550°C) Primer Finish is a black, high temperature resistant primer finish suitable for items reaching temperatures of up to 550°C. The product has a fast touch dry time helping to improve productivity. It has excellent covering power helping to reduce application costs.
Cromadex Monozinc One Pack Zinc-Rich Primer is a one pack, zinc-rich primer. Based on epoxy ester resin it is heat resistant to 400°C. It provides galvanic protection to new steelwork and can also be used to repair two pack zinc-rich primers. Monozinc contains more than 90% Zinc in the dry film.
Specially designed as a primer in a coating system where extended durability is required. Jotun Resist 78 is a solid foundation for the optimal performing coating system in the toughest exposures. Click here for more Jotun products. Coverage Calculator
Jotun Resist 86 is a two component moisture cured inorganic zinc ethyl silicate coating that is a fast curing, very high zinc dust containing product. Specially designed by Jotun as a primer in coating systems where extended durability is required. It provides a solid foundation for the optimal performing coating system in the toughest...