Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard (London) for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants...
Sherwin-Williams Acrolon C137V2 (formerly Resistex C137V2) is a high performance, fast drying acrylic urethane gloss finish for use where long term exterior gloss and colour retention characteristics are required. Acrolon C137V2 is suitable for use as a final coat(s) in conjunction with epoxy or polyurethane based protective systems for new...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating: For foot traffic, interior and exterior Anti-slip additive is premixed in the coating For use on old concrete (>2 yrs), metal and wood Unique uniform appearance, high gloss Touch dry: 6 hours, coverage: 8m² per litre Available in...
Up to 600°C
Heat Resistant Paint disclaimer:
It is important before choosing your heat resistant paint to distinguish the differences clearly between heat resistant paint and fire retardant paint.
Heat Resistant Paint
Heat Resistant Paint prevents:
Heat Resistant Paints also protect from corrosion and exposed environments, though this does vary from product to product.
Fire Retardant Paint
Fire Retardant Paint prevents:
Example: Christmas Tree
The sub-categories within the 'Heat Resistant Paints' section allow users to filter by the temperature up to which they need protection. These are to be used as a GUIDE ONLY, as there will be instances where a product will be able to achieve higher protection on certain section sizes but not others.
For further product, project and pricing support, we ALWAYS recommend you contact our Technical Department before purchase and use.
Heat and fire protection does not have to be like reading between blurred lines, let our technical staff help you get the level of protection you require and the finish that you want.
If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.
- Brand: Jotun
Jotun Solvalitt is a one component, physically drying silicone acrylic coating, heat resistant up to 600°C. Designed as a heat resistant coating suitable for insulated and non insulated surfaces, Solvalitt is recommended as a finish coat for insulated surfaces, in systems with suitable primers. Can be used as primer, mid coat or finish coat...
Jotun Solvalitt Alu is a one component physically drying silicone acrylic coating that is an aluminium pigmented product leaving a metallic silver finish. It is heat resistant up to 600°C and can be used as a primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless...