Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.
Vertical Surface Repairs
We at Rawlins Paints have vertical repair products for a selection of materials including stonework, asphalt, concrete and metal. Walls can easily become damaged, whether it be filling cracks or a decorative repair that you require, we have repair products to fix any blemishes on your edifice. We have products not only to fill cracks or crevices, but components to enhance waterproofing, chemical resistance and prevent abrasion. There are also joint fillers for filling dormant and non-dormant cracks prior to decorating.
When doing any repair work, it is vital to prepare the surface properly as well as fix any issues. Otherwise you will end up doing the project on repeat. Be sure to remove any debris and clean the surface of any uneven segments. We have products for these purposes too - If in any doubt then check the Product Data Sheet of your repair material. When it comes to identifying the repair work that needs to be done, be sure that you know the root of the problem. Walls can suffer from all manner of sins - structural damage, rising damp from the soil below, flooding from the room above, inefficient foundations - the issues come from every side! It is very easy for a business to decorate their offices or shops to the rafters, fill them with incredibly expensive equipment all to find that they ignored that crack in the wall that grew over time.
- Categories: Specialist Renders
Remmers Compound Mortar is a universal cementing, reinforcement, filling and repair mortar, for the restoration of old buildings and for new buildings. Water, weather and frost resistant, stress-equalising, can applied by hand as well as by conventional rendering machines equipped with an after mixer, very smooth and easy to work, stable and high yielding.
Remmers Compound Mortar S is a fast setting cementing and repair mortar that can be felted. It is a high quality reinforcement and filling mortar for reliable and fast repairs on facades. Can be used on mineral substrates suitable for the application of render, e.g. masonry brick, sand-lime brick, concrete, aerated concrete, rubble stone and lime-cement...
Remmers Universal Restoration Render HS is a fibre based, WTA restoration render with high sulphate resistance and low effective alkali content used for repair, renovation and restoration of old, damp and saltloaded masonry work, wall surfaces and plinth areas. Can be used on all mineral substrates appropriate for the application of render, e.g. masonry...
Remmers Mould Restoration Render is a capillary active, climate regulating render used to repair, renovate & refurbish damp interior walls in old & new buildings at risk of mould. Because of its low weight per unit area and favourable deformation behaviour, Mould Restoration Render is also suitable for substrates with less strength and less load-bearing...
Remmers Preparatory Mortar is a special preparatory mortar according to WTA used for preparing the substrate before cementitious renders are applied. Part of the Kiesol Waterproofing Systems and Remmers Restoration Render Systems. Remmers Preparatory Mortar is a factory-mixed, dry mortar that is ready to use after mixing with water and sets hydraulically.
Remmers Undercoat Render is a low alkali, levelling and pore undercoat render for restoring old buildings and masonry work, especially render bases with salt loads. Easy to apply and finish in one coat from 10 to 40mm thick! Can be applied by machine, highly stable, fibre reinforced, highly water vapour permeable, resistant to water, weather and frost.
Remmers Preparatory Mortar Rapid is a fast setting, special preparatory mortar used for quickly evening differing absorption behaviour of the render base, e.g. porous brick, natural stone or mixed masonry work. Easy to apply, good adhesion capacity, fast hydraulic setting, render can be applied after just 90 minutes, resistant to water, weather and frost...
Remmers Restoration Render is a fibre based, WTA restoration render that can also be applied in one layer used for the repair, renovation and restoration of damp, salt loaded wall surfaces and masonry work.
Remmers Fine Render is a mineral surface filler, fine render and reinforcement mortar which can be felted. Ideal for mineral substrates when repairing render and facades. Used for repairing facades, plinths and interior wall surfaces in new and old buildings and heritage buildings, for the production of fine, closed render surfaces that are...
Remmers Decorative Render L can be used as a finish for the Remmers Light-Weight Render and Remmers Thermal Insulation Render System. For the production of single layers of render with a Spanish style or troweled texture. Repair and production of thermally insulating layers of render in old buildings, heritage buildings, monuments and for new...
Remmers Compress Render is used to desalinate and remove moisture from natural stone, brick, render and other mineral substrates. It is also used as a sacrificial render on old buildings, historical buildings and monuments, indoors and outdoors. Remmers Compress Render is smooth, easy to work, stable and high yielding. When worked properly it can be...
Remmers Repellent Render is a fibre reinforced, water impermeable render for reliably waterproofing buildings. Single component, polymer modified, dry mortar with hydraulic binders, mineral aggregates and special additives. Low in chromate. Substrate for waterproofing with polymer modified, bitumen thick coatings as well as flexible and rigid...
- Domestic rooms below bathrooms
- Walls near leaking appliances
- Vehicle collision
- Rising damp
- Restaurant kitchens
- Newly bought properties
- Properties for sale
- Misused shops with new leases
- Unsafe garages
- Weather hit extensions
- Warehouses with heavy traffic
- Weak foundations
To open a Credit Agreement Trade Account at Rawlins Paints, simply click on the link below to download a Account Application Form. Once filled in, please return the Application Form to [email protected]
Alongside standard Technical and Sales Support Rawlins Paints offers to its customers, Credit Agreement Trade Account members will also benefit from:
- 30 Days Credit
- Preferential Pricing
- Access to Training
- Further Guarantees and Warranties
- And More
For further information, contact [email protected]
Download you Credit Agreement Trade Account Application Form here.