Sherwin-Williams Acrolon C137V2 (formerly Resistex C137V2) is a high performance, fast drying acrylic urethane gloss finish for use where long term exterior gloss and colour retention characteristics are required. Acrolon C137V2 is suitable for use as a final coat(s) in conjunction with epoxy or polyurethane based protective systems for new...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
The ultimate performance shellac-based primer-sealer and stain killer for interior and spot exterior use. Offers unparalleled adhesion to glossy surfaces (including glass) without the need for scuff sanding and blocks stubborn and persistent stains. Available in more than 90 colours from RAL and BS shades (1L, 2.5L, 5L only). • Ultimate...
Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating: For foot traffic, interior and exterior Anti-slip additive is premixed in the coating For use on old concrete (>2 yrs), metal and wood Unique uniform appearance, high gloss Touch dry: 6 hours, coverage: 8m² per litre Available in...
This section features a collection of unique paints and coatings that provide solutions to specific requirements; such as chalkboard paint, thermal paint, swimming pool paint, brick and tile paint, dry wipe paint, tub and tile paint, squash court paint, metallic paint, and much more.
Find one off products that have been specifically developed for a particular use that is normally quite a niche area. We like to offer products like these because we believe in choosing the correct product for the job rather than trying to make something that's not really meant for it work. Everything from general DIY paints right through to professional high-performance coatings.
Zinsser Grade 1 is a high performance paint for the interior decoration of walls and ceilings in traditional and historic buildings, including churches, castles and period properties. It s the perfect high-performance paint that acts as a primer, sealer and finish coat in one. Available in more than 60 colours in RAL & BS shades....
A one-coat, crack filling, interior paint system that is a high build obliterating water based matt finish suitable for use on internal walls and ceilings. Designed to infill block and brickwork to give a smoother surface where cost of rendering and plastering is not required. This product is temporarily out-of-stock. Please contact a...
Bedec Interior-Flex Elastomeric Matt Emulsion is an elastomeric matt emulsion paint formulated to coat interior ceilings and walls. A unique product designed to bridge hairline cracks and flex with the substrate where movement causes cracking with conventional matt emulsion. Features and Benefits Smooth matt finish Flexible and breathable...
A high build, high obliterating water based matt finish suitable for use on internal walls and ceilings. Designed to infill blockwork and brickwork and cover most surfaces in just one coat. This product is temporarily out-of-stock. Please contact a member of our Technical Support Team on 0113 2455450 (option 2) or send a message to...
Mathys Fair Decor is an additive to water based paint to extend the drying time and reduce flow for producing paint effects such as dragging, rag rolling and marbelling. To prolong the drying time of waterborne paints
Mathys Fairtex is a matt acrylic paint for the decoration of interior walls and ceilings. Can be applied to most common substrates including plaster, brick and concrete. Even old paint in good condition and most types of wallpaper can be directly recoated. Smooth and completely splash-free roller application Covers on porous and non porous...
Mathys Paracem Deco Ceiling is a super covering and extra matt acrylic paint for ceilings and inner walls that can be applied on most mineral substrates providing an excellent one coat ceiling paint. Exceptional high covering power (covers mostly in 1 layer) Uniform matt finish without laps Delayed drying (enables to paint large surfaces)...
Mathys Paracem Deco Matt is a high-quality, trade decorative matt interior wall paint for finishing for indoor walls and ceilings. Applicable on most substrates (plaster, bricks, concrete, etc.) in private as well as public buildings. Excellent flow Good mechanical resistance against rubbing Smooth mat aspect High covering power...
Mathys Paracem Effects Finish is a water based acrylic varnish used as a finish for interior decorative paints where a high mechanical resistance is required. The recommended topcoat for Paracem Effects Sand/Sable or Fair Decor. Does not yellow Easy application with roller or brush Uniform clear satin finish Washable
Mathys Paracem Effects Primer is a water based acrylic primer for interior porous surfaces prior to painting them with Mathys Paracem Effects Sand/Sable. Reinforces the substrate and decreases absorption For porous, non-painted surfaces Ideal for bricks, plaster & concrete
Coo-Var White Glass Shading is a water based paste for dilution. Ideal to block out excess light and heat in factories and greenhouses. Helps to reduce interior temperature. Product Features Apply direct A water based paste for dilution Ideal to block out excess light and heat Finish: Matt Application: Brush or roller Drying time: 1-2...
A water based, slow setting acrylic glaze, suitable for paint effects such as rag rolling, stippling, sponging, and marbling. This product is temporarily out-of-stock. Please contact a member of our Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information or suitable...
Some of the products featured here will also be associated with other sections, as Rawlins Paints continues to grow its product ranges, and manufacturers extend theirs, too. Others, however, are difficult to tie in with bigger umbrella categories, as they have been designed for one task, and one task alone!
Unique Coatings and Decorating Solutions from Bedec
Bedec Blockfill is designed to infill block and brickwork to give a smoother surface where cost of rendering and plastering is prohibitive or unachievable. Suitable for interior applications, including warehouses, stockrooms, factories and more, it is an easy clean, one-coat system.
Bedec Interior-Flex Elastomeric Matt Emulsion is an elastomeric matt emulsion paint that is designed to bridge hairline cracks and flex with the substrate where movement typically causes cracking with conventional matt emulsions.
Bedec Scumble Glaze is a water based, slow setting acrylic glaze, suitable for paint effects such as rag rolling, stippling, sponging, and marbling. Designed for application as a decorative glaze for use over water based eggshell, oil based base coats or vinyl silk emulsion paint, it is non-flammable and produces low odour upon application.
Old-school blackboard paint is still available from Blackfriar and Rust-Oleum, as old and tired boards advertising Food Specials, or Bar Promotions, can now be brought back to life and reflect the modern aesthetics or rustic charm of restaurants, bars, cafes or even art gallery gift shops!
If you have ever needed a dead matt black finish for old beams, panelling, decorative ironwork, stage scenery or a photographic darkroom, and have found standard matt paints have too much of a sheen when dry, then Blackfriar’s Matt Black Paint can deliver the professional finish you need.
Coo-Var Brick & Tile Paint WB is a water-based paint for use on stone, concrete, plaster, render, and bricks, that improves and protects the substrate with a flat brick red finish.
Coo-Var Terebine Liquid Driers helps paint dry in chilly winter months.
Coo-Var White Glass Shading can be used to block out excessive light and heat in factories and green houses with glass ceilings or external panels.
Mathys Fair Decor is an additive for waterborne paints to extend the drying time of the coating, most commonly used with interior decorative paints for walls and ceilings to reduce flow for producing paint effects such as dragging, rag rolling and marbling.
Mathys Fairtex is a matt white acrylic paint for the decoration of interior walls and ceilings, which can also be used on most types of wallpaper.
Mathys Paracem Deco Ceiling is a super covering and extra matt acrylic paint for ceilings and inner walls.
Mathys Paracem Effects Finish is a water based acrylic varnish used as a finish for interior decorative paints where a high mechanical resistance is required.
Manufacturers including Rust-Oleum and Zinsser like to produce wall paints that can be used in a multitude of environments, like Write-On Paint and Doodle Wall, which meet many modern-day office requirements for walls to be white-boards for brain-storming sessions. Also suitable for schools, nurseries and youth centres, these unique products are as inspired as they are inspiring to use as a blank canvas!
Teamac Acrylic Coating is used on agricultural buildings to protect, refresh and decorate tile and brick roofs as well as sealing asbestos sheets and barns.
Often used as a gloss finish, Chlorvar Chlorinated Rubber Paint will give protection in moderate to severe corrosive atmospheres – such as in swimming pools, parlours, piping, laundries and marine applications.
Teamac Metalastic Black Bituminous Paint is a high quality bituminous solution for marine, industrial and agricultural applications. It forms a waterproof, weatherproof, and corrosion resistant coating for interior and exterior use. It is resistant to low levels of alkalis and acids and can withstand prolonged oxidisation.
Teamac P101 2 Pack Polyurethane Topcoat is an aliphatic polyurethane topcoat that is light stable so will not fade or yellow when exposed to high levels of ultraviolet light. It is ideal for floors, walls, structures inside and out requiring protection against chemicals, graffiti attack, elevated levels of traffic and more.
Historic buildings, including churches, castles and period properties, sometimes require a product that can deliver the exact requirements involved with renovation and refurbishment projects. Zinsser Grade 1 is a product that is frequently used in listed building to match precise colour schemes and stop legacy fungal degradation that has resulted in the need for the renovation project. Thanks to its vapour permeable film, the underlying substrate can breathe, and any damp that is in the brick, stone or masonry can naturally evaporate, without condensation, damp or mildew problems to the topcoat finish.