Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard (London) for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants...
Sherwin-Williams Acrolon C137V2 (formerly Resistex C137V2) is a high performance, fast drying acrylic urethane gloss finish for use where long term exterior gloss and colour retention characteristics are required. Acrolon C137V2 is suitable for use as a final coat(s) in conjunction with epoxy or polyurethane based protective systems for new...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating: For foot traffic, interior and exterior Anti-slip additive is premixed in the coating For use on old concrete (>2 yrs), metal and wood Unique uniform appearance, high gloss Touch dry: 6 hours, coverage: 8m² per litre Available in...
This section features a collection of unique paints and coatings that provide solutions to specific requirements; such as chalkboard paint, thermal paint, swimming pool paint, brick and tile paint, dry wipe paint, tub and tile paint, squash court paint, metallic paint, and much more.
Find one off products that have been specifically developed for a particular use that is normally quite a niche area. We like to offer products like these because we believe in choosing the correct product for the job rather than trying to make something that's not really meant for it work. Everything from general DIY paints right through to professional high-performance coatings.
- Brand: HMG Paints Limited
HMG SQ26 Crackle Top Coat is an air dried special effect finish, originally developed for ultra high quality interior decorative domestic and industrial applications. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 3-Pack System Details Base (Part 1) HMG SQ26 Crackle...
HMG SQ26 Crackle Base Coat is an air dried special effect finish, originally developed for ultra high quality interior decorative domestic and industrial applications. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 3-Pack System Details Base (Part 1) HMG SQ26...
HMG Inflex 2 Pack Flexibiliser is an additive designed to give greater flexibility to HMG Acrythane 2K products. Doesn`t comprimise any performance characteristics The product aids the use of HMG Acrythane 2K materials on flexible plastic substrates Click to jump down to Technical Data
HMG Acrythane Glass Adhesion Additive is an additive to improve the adhesion. Designed to improve the adhesion of HMG Acrythane SC601 and XSC21 to glass substrates Click to jump down to Technical Data
HMG Vinyl Matt Emulsion is a premium quality water-based, flat matt emulsion. For interior use on wall and ceiling surfaces, where a flat non-reflective finish is required Click to jump down to Technical Data
HMG Vinyl Silk Emulsion is a premium quality water-based, silk emulsion for interior use. For interior use on wall and ceiling surfaces, where a high sheen finish is required Water based Tough washable finish Quick drying Good opacity Easy application Click to jump down to Technical Data
HMG Contract Matt Emulsion is a water-based decorative trade matt emulsion that has excellent opacity that improves as the paint dries. Excellent results can be achieved with a single coat. Designed for easy application on interior plaster walls and ceilings. Click to jump down to Technical Data
HMG Acrylic Eggshell is a water-based mid-sheen finish decorative emulsion that provides a durable, washable finish, resistant to condensation. Ease of use Quick drying Low odour Click to jump down to Technical Data
HMG Gloss Trim Paint is a premium quality water-based, decorative and protective finish for use over correctly prepared joinery. Ideal for windows, doors, soffits and fascias Available in both gloss and satin finish Ease of use Quick drying Low odour Click to jump down to Technical Data
HMG Satin Trim Paint is a premium quality water-based, decorative and protective finish for use over correctly prepared joinery. Ideal for windows, doors, soffits and fascias Ease of use Quick drying Low odour Click to jump down to Technical Data
HMG Decorative Acrylic Primer Undercoat is a water based Acrylic coating designed as a suitable undercoat and surfacer for various substrates. Good stain blocking properties Easy to use Odourless Ready for use Non bleed barrier coating for metal substrates Click to jump down to Technical Data Coverage Calculator
Some of the products featured here will also be associated with other sections, as Rawlins Paints continues to grow its product ranges, and manufacturers extend theirs, too. Others, however, are difficult to tie in with bigger umbrella categories, as they have been designed for one task, and one task alone!
Unique Coatings and Decorating Solutions from Bedec
Bedec Blockfill is designed to infill block and brickwork to give a smoother surface where cost of rendering and plastering is prohibitive or unachievable. Suitable for interior applications, including warehouses, stockrooms, factories and more, it is an easy clean, one-coat system.
Bedec Interior-Flex Elastomeric Matt Emulsion is an elastomeric matt emulsion paint that is designed to bridge hairline cracks and flex with the substrate where movement typically causes cracking with conventional matt emulsions.
Bedec Scumble Glaze is a water based, slow setting acrylic glaze, suitable for paint effects such as rag rolling, stippling, sponging, and marbling. Designed for application as a decorative glaze for use over water based eggshell, oil based base coats or vinyl silk emulsion paint, it is non-flammable and produces low odour upon application.
Old-school blackboard paint is still available from Blackfriar and Rust-Oleum, as old and tired boards advertising Food Specials, or Bar Promotions, can now be brought back to life and reflect the modern aesthetics or rustic charm of restaurants, bars, cafes or even art gallery gift shops!
If you have ever needed a dead matt black finish for old beams, panelling, decorative ironwork, stage scenery or a photographic darkroom, and have found standard matt paints have too much of a sheen when dry, then Blackfriar’s Matt Black Paint can deliver the professional finish you need.
Coo-Var Brick & Tile Paint WB is a water-based paint for use on stone, concrete, plaster, render, and bricks, that improves and protects the substrate with a flat brick red finish.
Coo-Var Terebine Liquid Driers helps paint dry in chilly winter months.
Coo-Var White Glass Shading can be used to block out excessive light and heat in factories and green houses with glass ceilings or external panels.
Mathys Fair Decor is an additive for waterborne paints to extend the drying time of the coating, most commonly used with interior decorative paints for walls and ceilings to reduce flow for producing paint effects such as dragging, rag rolling and marbling.
Mathys Fairtex is a matt white acrylic paint for the decoration of interior walls and ceilings, which can also be used on most types of wallpaper.
Mathys Paracem Deco Ceiling is a super covering and extra matt acrylic paint for ceilings and inner walls.
Mathys Paracem Effects Finish is a water based acrylic varnish used as a finish for interior decorative paints where a high mechanical resistance is required.
Manufacturers including Rust-Oleum and Zinsser like to produce wall paints that can be used in a multitude of environments, like Write-On Paint and Doodle Wall, which meet many modern-day office requirements for walls to be white-boards for brain-storming sessions. Also suitable for schools, nurseries and youth centres, these unique products are as inspired as they are inspiring to use as a blank canvas!
Teamac Acrylic Coating is used on agricultural buildings to protect, refresh and decorate tile and brick roofs as well as sealing asbestos sheets and barns.
Often used as a gloss finish, Chlorvar Chlorinated Rubber Paint will give protection in moderate to severe corrosive atmospheres – such as in swimming pools, parlours, piping, laundries and marine applications.
Teamac Metalastic Black Bituminous Paint is a high quality bituminous solution for marine, industrial and agricultural applications. It forms a waterproof, weatherproof, and corrosion resistant coating for interior and exterior use. It is resistant to low levels of alkalis and acids and can withstand prolonged oxidisation.
Teamac P101 2 Pack Polyurethane Topcoat is an aliphatic polyurethane topcoat that is light stable so will not fade or yellow when exposed to high levels of ultraviolet light. It is ideal for floors, walls, structures inside and out requiring protection against chemicals, graffiti attack, elevated levels of traffic and more.
Historic buildings, including churches, castles and period properties, sometimes require a product that can deliver the exact requirements involved with renovation and refurbishment projects. Zinsser Grade 1 is a product that is frequently used in listed building to match precise colour schemes and stop legacy fungal degradation that has resulted in the need for the renovation project. Thanks to its vapour permeable film, the underlying substrate can breathe, and any damp that is in the brick, stone or masonry can naturally evaporate, without condensation, damp or mildew problems to the topcoat finish.