Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.
SCHÖNOX DSP is a very low emission, premium levelling compound for direct use for all suitable substrates in exterior and interior areas. Especially suitable for levelling of industrial floors as well as garages and cellars. SCHÖNOX DSP is characterised by a low material shrinkage, very good flow properties and a homogeneous concrete gray...
SCHÖNOX FPL PLUS is a self levelling compound for use from 3 to 60mm, with aggregate 60mm. SCHÖNOX FPL PLUS is noted for very little shrinkage. After adding of 4.5 litres water to 25kg of powder, SCHÖNOX FPL PLUS is ready to use. Interior and exterior.
Sikafloor 200 Level is a very low emission, cement based self levelling compound suitable for interior and exterior areas. Sikafloor 200 Level is noted for its extremely low shrinkage. Sikafloor 200 Level is suitable for filling, smoothing and levelling suitable substrates before applying parquet, ceramic tiles, textile and elastic floor coverings.
Sika 1 Finishing Mortar is part of the Sika 1 Structural Waterproofing System and is the third layer of the wall render system. Supplied in pre-batched green banded bags for easy identification and use When mixed with Sika 1 Waterproofer Liquid Admixture it produces part of a complete structural waterproofing system for walls
Sika 1 Screed Mortar is part of the Sika 1 Structural Waterproofing System and is the third layer of the floor screed system. Supplied in pre-batched blue banded bags for easy identification and use When mixed with Sika 1 Waterproofer Liquid Admixture it produces part of a complete structural waterproofing system for floors
Sika 1 Spritz and Bonding Coat Mortar is part of the Sika 1 Structural Waterproofing System and is the first layer of the render or screed system. Supplied in pre-batched red banded bags for easy identification and use. When mixed with Sika 1 Waterproofer Liquid Admixture it produces part of a complete structural waterproofing system for...
Sika 1 Waterproofer Liquid Admixture is an aqueous solution containing complex colloidal silicates. In the presence of water these swell and block the capillaries and pores in the applied sand/cement renders, screeds and mortar to provide an effective barrier against the transmission of liquid water.
Sika MonoTop 109 WaterProofing Mortar is a one-component cement based premixed mortar with brushable consistency. Ready to use (just add water), high quality, thin waterproof slurry coating, based on special cements and admixtures to provide a water resistant and damp-proof finish. Suitable for preventing dampness and water penetration in basements,...
Sika MaxMix Waterproofer is a highly concentrated waterproofing and air entraining admixture for sand and cement which is 25 times the strength of conventional products. It forms extremely stable air bubbles in sand/cement mixes. This improves the workability of mortar/render giving it a “buttery” consistency and helps prevent shrinkage, cracking, crazing...
Sika BentoShield MAX LM is a polymer modified bentonite waterproofing system. Mechanically bonded, contaminate resistant, self healing membrane for basement and below ground structures. Resistant to contaminated soils, forming an automatic mechanical bond to freshly poured concrete it virtually eliminates the possibility of water movement between the...
Sika BentoShield MAX Granules are polymer modified natural sodium bentonite granules, these granules when wetted form a dense waterproof paste. Used to seal Sika BentoShield MAX LM membrane around slab penetrations and pile heads. Create secondary fillets at wall / slab junctions, correct minor cracks in the substrate prior to the membrane application.
Remmers IR PUR 2K 150 is a two-component, flexible PUR injection resin for sealing water-bearing cracks and porous, water-soaked areas in concrete and masonry, grouting of construction joints and dilatable filling of cracks.
To open a Credit Agreement Trade Account at Rawlins Paints, simply click on the link below to download a Account Application Form. Once filled in, please return the Application Form to [email protected]
Alongside standard Technical and Sales Support Rawlins Paints offers to its customers, Credit Agreement Trade Account members will also benefit from:
- 30 Days Credit
- Preferential Pricing
- Access to Training
- Further Guarantees and Warranties
- And More
For further information, contact [email protected]
Download you Credit Agreement Trade Account Application Form here.