Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.
Waterproofing and Dampproofing
When it comes to construction, little is more vital than waterproofing. With that comes damp avoidance, or dampproofing, an issue which can be costly, unsightly, and productive of foul and unhygienic smells! Waterproofing work at the early stages of construction, or later in renovation and restoration work, can not only significantly improve the structural strength and lifespan of surfaces and substrates, but it can improve insurance rates, ongoing maintenance costs, and add value to the property.
There is such a wide range of waterproofing and dampproofing products and product ranges available in the UK from some of the world's biggest industrial and commercial manufacturers that it can become confusing as to what the key differences are between each, and which is best for specific substances, materials and interior/exterior surfaces - including horizontal or vertical surfaces. Each manufacturer's product data sheet will provide excellent resource - from storage recommendations, to application guidelines. However, if you require further assistance in the suitability of a product range, and other compatible products to meet your project's requirements, contact a member of our Technical Support Team on 0113 245 5450, where we can discuss options available to you today - for use in all weather conditions!
Remmers Reinforcement Fabric 2.5/25 & 2.5/100 is a reinforcement fabric made of glass fibres sheathed with polymer plastics used for reinforcing coatings and filling compounds when working over vertical joints and missing areas. Permanently elastic, rot-proof fab-ric for reinforcing crack-bridging coatings that do not contain coarse aggregates.
Water Stop SK 10/Water Stop SK 25 is a highly elastic, self-adhesive, butyl rubber on poly-propylene non-woven fabric used to quickly waterproof movement and expansion joints under tiles laid in a thin bed, Liquid Foil, Elasto Grout 1K/2K, Flex Grout 2K, Multi-Tight 2K and under ceramic tiles in normal household areas.
Remmers DS System Protection is filling protection and drain element for Remmers building waterproofing products. Protection of structures where they come in contact with the ground. Drain element (seepage and filter layer) of a drainage facility according to DIN 4095, Table 11, bonded elements.
Remmers Reinforcement Fabric 5/100 is an E-glass reinforcement fabric covered with polymeric plastics which is permanently elastic and rot proof reinforcing mesh for incorporation into crack-bridging coatings, that do not contain coarse aggregates. Reinforcement for composite heat insulation system.
Remmers Profi Tight 2K is used to waterproof in areas with ground contact against ground damp and non-standing seepage water, against moisture on ceiling surfaces and in wet rooms and against standing seepage water. A patented, 2-component building waterproofing polymer modified, bitumen thick coating with rubber fillers. Top quality product for...
Sika 1 Spritz and Bonding Coat Mortar is part of the Sika 1 Structural Waterproofing System and is the first layer of the render or screed system. Supplied in pre-batched red banded bags for easy identification and use. When mixed with Sika 1 Waterproofer Liquid Admixture it produces part of a complete structural waterproofing system for...
Sika 1 Screed Mortar is part of the Sika 1 Structural Waterproofing System and is the third layer of the floor screed system. Supplied in pre-batched blue banded bags for easy identification and use When mixed with Sika 1 Waterproofer Liquid Admixture it produces part of a complete structural waterproofing system for floors Features...
Sikalastic 1K is a one component, flexible, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. It also contains fine fillers, selected graded aggregates, plus special waterproofing additives to produce a flexible mortar that is ideal for waterproofing surfaces subject to flexural strain. Features and...
Sikalastic 152 is a 2-component, crack-bridging, fibre-reinforced cementitious mortar, with low elastic modulus with special additives for waterproofing and protection of concrete subgrades subject to flexural strain. Flexible waterproofing and concrete protection in one product, very good crack-bridging abilities, also at low temperature,...
SikaTop Seal 107 Standard is a two part polymer modified cementitious waterproof/damp-proofing mortar slurry comprising of a liquid polymer and a cement based mix incorporating special admixtures. Easy to apply by brush or in thin trowel applications, no water required, protects concrete against carbonation, protects against water...
To open a Credit Agreement Trade Account at Rawlins Paints, simply click on the link below to download a Account Application Form. Once filled in, please return the Application Form to [email protected]
Alongside standard Technical and Sales Support Rawlins Paints offers to its customers, Credit Agreement Trade Account members will also benefit from:
- 30 Days Credit
- Preferential Pricing
- Access to Training
- Further Guarantees and Warranties
- And More
For further information, contact [email protected]
Download you Credit Agreement Trade Account Application Form here.