Wood Finishes

Whether you’re looking to build a bike shelter for employees, or revamp the exterior woodwork on a building project, Rawlins Paints has the right wood finish for you. We stock a comprehensive range of wood varnishes, stains, oils, protective finishes, and wood paint for both interior and exterior uses – pretty much every project you can think of is covered by a product in our range. Whatever you need, we can provide advice on the best wood finish to use, from heavy duty floor varnish to opaque wood paint, like Solignum's solvent based Architectural coating, or decking oil to Danish oil.

Contact our Technical Team if you’re unsure as to the best product for your needs – remember to consider if you need water or solvent based wood finishes, when you want to apply it, if it’s inside or out and whether it should be coloured or clear.

There are 17 products.

Showing 1-12 of 17 item(s)

Active filters

  • Brand: Tikkurila
  • Type of Wood Finish: Wood Paint

Tikkurila Akvi Top DS 25

Tikkurila Akvi Top DS 25 is a one-component water-borne topcoat for interior timber and furniture. Fast-drying topcoat for interior use Very hard paint film Good filling properties Very good scratch and blocking resistance Suitable for panels, doors, mouldings, and other wooden/fibre board surfaces Low VOC content More Information...

Price £45.94
In Stock and Available for Delivery

Tikkurila Solid WB-L

Tikkurila Solid WB-L is a water-borne polyurethane-reinforced acrylate paint for concrete and wooden floors and stairs in residential, commercial and storage premises, and concrete floors in saunas and humid spaces. Suitable for floors subjected to light chemical and mechanical stress. Also suitable for painting of floors previously treated...

Price £58.82
In Stock and Available for Delivery

Tikkurila Solid Laq

Tikkurila Solid Laq, a 2 component product that can be used both for dust binding and as a top lacquer for other Solid floor products. It is well-suited to surfaces that are subject to moderate mechanical and chemical stress and can be used for both untreated concrete floors and those treated with epoxy or polyurethane paints and coatings....

Price £65.77
In Stock and Available for Delivery

Tikkurila Ultra Pro 30

Tikkurila Ultra Pro 30 is a water-borne one-component, polyacrylate exterior topcoat with optimal price-quality ratio, suitable for exterior wooden panels and claddings, etc. Excellent protection against weathering, moisture, sunlight and dirt Extremely low water absorption, decreases the moisture cracking of the wood Suitable for fast...

Price £233.71
In Stock and Available for Delivery

Tikkurila Pinja Flex Combi 25

Tikkurila Pinja Flex Combi 25 is a one-component water-borne polyacrylate paint with excellent adhesion properties. A fast-drying exterior paint for wood windows, frames, and doors that forms an elastic film with low water permeability properties. These attributes help the product protect wood against moisture and dirt. Excellent adhesion...

Price £15.68
In Stock and Available for Delivery

Tikkurila Pinja Flex Isolator

Tikkurila Pinja Flex Isolator is a fast-drying water-borne primer for window frames and exterior doors. Especially suitable for larch and other resin containing wood types. The primer retards bleeding of wood resins and slows down discolouring of topcoat caused by resins. In order to reach good isolating properties it is recommended to apply...

Price £243.16
In Stock and Available for Delivery

Tikkurila Pinjadur 30

Tikkurila Pinjadur 30, a two-component, water-borne polyurethane topcoat that is durable, easy to clean, and non-chalking. Excellent gloss and colour retention in climatic stress Can be cured at higher temperatures Suitable for fibre cement flat sheet and wooden surfaces in exterior premises Can also be used for interior doors, kitchen...

Price £77.94
In Stock and Available for Delivery

Tikkurila Pinja Top

Tikkurila Pinja Top, a water-borne acrylate semi opaque exterior paint for exterior wooden panels and claddings. Maintains natural surface structure of wood Contains alkyd for improved adhesion to bare wood Protects the surface against moisture, sunlight and dirt Price on application - enquire with our team on 0113 2455450 or send a...

In stock

Tikkurila Pinjasol Color

Tikkurila Pinjasol Color, a semi-transparent tintable wood stain. Suitable for wooden surfaces such as window frames, front doors, wall boards, log cabins, etc. Protects the surface against moisture, sunlight and dirt. Decreases cracking of wood surface For industrial use only Availability on application - enquire with our team on 0113...

In stock

Tikkurila Ultra Pro Plus 30

Tikkurila Ultra Pro Plus 30, is a water-borne one-component, polyacrylate exterior topcoat with outstanding protection against weathering. Suitable for exterior wooden panels and claddings, etc. Extremely low water absorption, decreases the moisture cracking of wood Suitable for fast production lines and drying in elevated temperature as...

In stock

Tikkurila Ultra Pro

Tikkurila Ultra Pro is a water-borne one-component, polyacrylate exterior topcoat with optimized hiding properties, for exterior wooden panels and claddings, etc. 2 coats of Ultra Pro provides excellent protection against water penetration, suppressing cracking of timber by preventing water uptake also through the edges. It must be coated with...

Price £233.71
In Stock and Available for Delivery

Tikkurila Dicco Flex 30

Tikkurila Dicco Flex 30 is a fast drying and elastic paint for outdoor use, recommended for wooden window frames and front doors. Two-component Acid-catalyzed topcoat Thixotropic Good hiding properties For industrial and professional use only More Information

Price £37.07
In Stock and Available for Delivery

Need Help?

Need Help?

Wood and timber finishes can be used to embellish the characteristics of the material, or protect its surface from spoiling under one of many conditions. Following sufficient preparation, most timber and wood surfaces, from panelling, flooring, beams and furnishings, to doors, window frames, sills and decking are ready for one of several treatments, coatings or paints:

  • Wood oil
  • Wood varnish
  • Wood and timber paint
  • Fire retardant paint
  • Wood stain
  • Wax
  • Lacquer
  • Shellac
  • Wood preservative
  • Wood dye
  • And many more

A number of these finishes are available to buy today at Rawlins Paints, and we have published articles on our blog on how to get the best wood finishes, or looked at product recommendations for a specific project.

The products stocked here are not for domestic, DIY or upcycling projects, and instead for renovation, restoration or new-build projects on a grand scale. From heritage sites and state homes, to churches, chapels and art galleries, products available at Rawlins Paints are better suited for high-end, feature focused work in locations such as:

  • Hotel foyers
  • Sports centres’ court surfaces
  • Agricultural structures
  • Exposed beams and timber frames in listed buildings
  • Public houses, bars, restaurants, cafes and nightclub counters, panelling and exposed stairs that require durable and decorative products to protect them from light to medium footfall, abrasion and where applicable, heat, water and exposure to sunlight and UV rays
  • Outhouses
  • Wine cellars
  • Office and public space corridors and wooden floors
  • Plus, many more scenarios within the workplace, retail sector and public buildings

There are three primary types of wood finishes:

  • Evaporative
    • Wax is one example, where through its application process it is dissolved in turpentine to form a soft paste. As the distillation process continues, a wax residue is left over on the surface
  • Reactive
    • These types of finishes include the use of solvents and white spirits as a base, which then change chemically as the product cures. Examples are varnishes, linseed or Tung oil
  • Coalescing
    • Water-based finishes tend to fall into the coalescing category. Several wood finishes available at Rawlins Paints are water-based, some with solvent-based counterparts, too

Key criteria for clear wood finishes, where the underlying substrate’s grain is frequently required to be embellished, are:

  • Cost efficiency and subsequent maintenance – cleaning regimes or further refinishing also routinely required
  • Final appearance
    • Colour
    • Darkening of the wood
    • Gloss, matt or satin finish
  • Level of protection offered
  • Durability
  • Safety, VOCs, application requirements
  • Water-resistance

Water resistance is frequently a key requirement – to protect against spills, splashes and light-cleaning products.

Please refer to product datasheets for further information on:

  • Product thinning
    • Some manufacturers encourage a product to be thinned for improved coverage rates
  • Drying times
  • Recoatable
  • Maintenance requirements
  • Storage of products after use
  • Cleaning of application equipment
  • VOCs and full chemical make-up of a product
  • Whether a product can or must not be stirred

There are so many products and finishes available, that to cover all application and finishing methods per product type would be nearly impossible. So, please visit our blog or contact us for application and ‘best finish’ tips per product.

Bear in mind that water-based and solvent-based products may dry / cure to leave a different result – solvent coatings may be slightly darker, but ultimately are more durable. Wood stains will also soak into the wood or timber and therefore cannot be sanded down, whereas varnishes can be applied as a durable topcoat that can be sanded down or planed to remove it.

Please contact our Technical Support Team if you are unsure which product will deliver the correct finish you require, or test a product on a small off-cut or hidden surface area first, to see to result you will get upon full application.

Finishes for Interior Woodwork

We stock a vast range of surface preparation and finishes for internal use, whether it’s the inside of garden sheds, log cabins, window frames, doors, wooden window trim, wooden floors, kitchen worktops, bar surfaces or furniture.

Depending on your project, you may want to use wood oils which sink deep into the grain of the wood. Often easier to apply than varnishes, wood oils are great for repairs and maintenance on wooden floors and surfaces. Or you may want to choose a heavy-duty varnish if your surface is going to need to be very heard wearing.

Polyurethane clear floor coatings are oil based varnishes that give a good finish to wooden floors, while also being very durable. Coo-Var Polyurethane Clear Floor Coating is particularly good for high traffic areas like restaurant floors, as it gives a hard glaze and a surface that’s easy to clean. Durable and low-maintenance, it’s a good option for floors that need to be hardwearing.

Decorative Wood Finishes

If you’re looking for specific wood paint colours, we have creative options such as Blackfriar Metallic Paint. For interior and exterior wooden surfaces, metallic paint gives an enriched and gilded finish to your woodwork, making your project stand out from the crowd. Particularly good for public areas such as restaurants, pubs, dining areas and anywhere that needs a bit of decorative flair.

Ardenbrite also offer similar wood paints, with a beautiful metallic finish. Choose from Ardenbrite Metallic Paint (Water Based) or Ardenbrite Metallic Paint (Solvent Based) depending on the needs of your specific project.

For a satin-finish wood paint, Mathys Fassilux Aqua XPE Satin can be used on interior and exterior timber and gives a lovely scratch resistant finish.

If you’re not looking to recolour your woodwork, then you could choose a Danish Oil product. Coo-Var Danish Oil gives a very durable, water resistant seal to wood, and can be used on exterior woodwork and interior woodwork. Danish oil brings out the natural beauty of the wood and enhances its appearance, without drastically changing the colour of the finish.

A blend of oils specifically for hardwood, Coo-Var Teak Oil works well on wooden furniture or if you’re looking for a shinier finish, Coo-Var Polyurethane Varnish is a hard wearing, clear varnish that can also be used on interior or exterior timber. With a choice of eggshell, matt and gloss finishes, it’s particularly good for kitchen worktops, furniture and interior doors.

Exterior Woodwork Finishes

Outdoor wooden furniture, fences, sheds and various other timber also needs decorating and protecting. As it’s obviously subject to potentially harsh weather conditions, the protection from Blackfriar's Gold Star wood preservative is different than for indoor woodwork. We stock external varnish, external wood stain and external floor paint for various uses, including waterproofing external walls and floors.

Please note that Jotun Butinox products have now been discontinued by the manufacturer.

Click here for the full range of exterior wood finishes, including products from Ardenbrite, Blackfriar, Coo-Var, Jotun, Mathys, Rust-Oleum, Solignum, Teamac, Wethertex and Zinsser.

Decking Oil and Protection

Timber decking finishes, whether it’s garden decking or boat decking need to be carefully considered based on the requirements of the surface area, usage and environment. If you need more waterproof protection, or want something for specific wood, such as teak decking for boats, then contact our Technical Team for advice.

It’s important to prepare decking properly before applying any kind of timber decking finishes. Non-slip decking properties, fire retardant decking or sprayable decking stain… whatever you’re looking for we can help you out.

Solignum Timber Decking Oil is an oil that can be applied with a brush and provides protection at the same time as enhancing the appearance of the wood. For teak and hardwoods, Teamac Teak Oil gives a good water resistance coating thanks to its blend of natural oils and silicone. You can use this inside and outside to ensure your hardwood is beautiful and protected.