- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Wood Lacquer
Wood lacquer delivers a tough, fast-drying finish for interior timber, offering long-lasting protection and clarity in a variety of finishes from high gloss to matt. It is suitable for furniture, panelling, bannisters, wood floors, and doors. For upcycling projects, wood lacquer can be applied over painted timber to seal and protect the finish. This makes it a practical choice for repurposed furniture, cupboard paints, painted doors, and in particular protecting painted wood floors, offering an extra layer of protection and a polished surface.
HMG Pre Cat AV Clear Lacquer
HMG Pre Cat AV Clear Lacquer is a fast drying 1K lacquer with good film build and excellent application characteristics. Formulated for use on wood substrates For interior use only Available in a range of clear sheen finishes
HMG Acid Cat AC 3000 Lacquer
HMG Acid Cat AC 3000 Lacquer is a medium - high solids acid catalysed system offering outstanding build, exceptionally fast dry, excellent colour retention and low formaldehyde content. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part...
Intercoat Gloss PU Acrylic Lacquer 40280
Intercoat Gloss PU Acrylic Lacquer 40280 is a 2-pack non-yellowing lacquer for use on interior flat surfaces and furniture items in general. Excellent colour stability and surface hardness For most wood surfaces including melamine faced chipboard For professional use only. More Information Delivery Info
Intercoat EnviroLa/c Low Odour A/C Clear Lacquer
Intercoat EnviroLa/c Low Odour A/C Clear Lacquer is a fast drying, 2-component lacquer type formulated with a low-odour solvent and resin combination to minimise emissions. Part of the Intercoat Envirola/c range. Tested to 6250 and meets the Severe Use rating in areas of wet and dry heat, resistance to alcohol and mechanical damage...
Intercoat Fast Dry A/C Clear Lacquer
Intercoat Fast Dry A/C Clear Lacquer is a range of modified acid-catalysed lacquers with a VOC content below 570 grams per litre, making them suitable for Mass Balance applications where the maximum VOC content is 1.6 times the solid content. Very rapid curing lacquer capable of meeting the Severe Use requirements of BS 6250 on horizontal...
Intercoat W/B UVA Lacquer
Intercoat W/B Lacquer is a high viscosity clear lacquer with excellent in-can and dry film transparency, designed for curtain coat application to most wooden and wood based substrates. Based on a high performance acrylic polymer that will achieve 6250 Severe rating on horizontal surfaces Available in 5% - 90% Gloss For professional use...
Intercoat Aqualine Clear W/B Lacquer
Intercoat Aqualine Clear W/B Lacquer is a high viscosity clear lacquer for wood substrates with excellent in-can and dry film transparency. Designed to meet FIRA 6250 General Use Requirements. Contains FDA approved monomers, thus can be used for food related applications without direct contact. For professional use only. More Information...
Polyvine Multi-Surface Lacquer
Polyvine Multi-Surface Lacquer is an ultra hard, high quality, cross linked acrylic, sandable coating with a gloss/satin finish. This coating dries to a crystal clear film with extremely good sanding properties, allowing a very high quality of finish to be obtained. Specially formulated to bond to a wide range of interior and exterior...
Anker Stuy Ankocryl Interior Clear Lacquer
Waterborne clear self sealer in nature matt, matt, or gloss finishes for spray application. Primary use for interior joinery including kitchen cabinets. Fast Drying High scratch and abrasion resistance Low VOC Toy safe Natural appearance More Information Delivery Info
Coo-Var Clear Glaze for Wooden Floors
Water-based clear acrylic glaze designed for wooden and concrete floors. For areas where fast drying and minimal solvent odour are desired. Non-flammable, easy to apply with brush or roller, and cleans up with water.
Flag Pure Button Polish
Flag Pure Button Polish - button shellac is hand made in the villages around Calcutta, it is therefore less refined than machine made shellacs, however this gives added strength to the polish film and for this reason is often used as a finishing coat for a sealing stain. For interior use on wood - Gloss finish - Golden Brown Golden...
HMG AIF630 Button Polish
HMG AIF630 Button Polish is a pale coloured sealer for use on wood and metal surfaces. Its fast drying characteristics and ease of application lends itself to a whole variety of usages. The product is a modified resin type and is non-toxic and thus suitable for food contact. Suitable for use using a rubber for French Polishing purposes....
Tikkurila Merit Topas 10
Tikkurila Merit Topas 10, a two-component acid-catalyzed lacquer recommended for furniture, doors and other wooden surfaces indoors. Its good filling properties, the lacquer gives the finished surface an impression of fullness Dries approximately 20–30% faster than standard acid-catalyzed lacquers resulting in a more efficient production...
Tikkurila Merit Topas 25
Tikkurila Merit Topas 25 is a two-component acid-catalyzed lacquer that, due to its good filling properties, gives the finished surface an impression of fullness. Dries approximately 20–30% faster than standard acid-catalyzed lacquers - more efficient throughput in production Does not contain any aromatic solvents - more user-friendly than...
Tikkurila Merit Zircon Extra 25
Tikkurila Merit Zircon Extra 25 is a one-component, acid-catalyzed, fast curing, all-round lacquer without aromatic solvents. Easy to sand Suitable for priming and top lacquering of furniture, doors and other wooden surfaces in general Fulfils the requirements of E1 classification for surface treatment materials Tested according to the...
Tikkurila Merit 20
Merit 20 is a two-component, acid-catalyzed, semi-matt all-round lacquer with good filling properties. Recommended for furniture, doors and other similar wooden surfaces Fulfils the requirements of E1 classification for surface treatment materials Tested according to the standard EN 717-1, and its formaldehyde emission rate is less than...
Tikkurila Merit 30
Merit 30 is a two-component, acid-catalyzed, all-round lacquer with good filling properties. Recommended for furniture, doors and other similar wooden surfaces MED (Marine Equipment Directive) certificate no VTT-C-11165-15-14 for painting surfaces inside of ships Use with hardener 006 2098 - purchased separately More Information...
Tikkurila Merit 80
Merit 80 is a two-component acid-catalyzed lacquer recommended for furniture, doors and other similar wooden surfaces. An all-round lacquer with good filling properties for indoor use Tested according to the standard EN 717-1 - its formaldehyde emission rate is less than 0.124 mg/m³ air Use with hardener 006 2098 - purchased separately...
HMG Pre Cat AV Colours
HMG Pre Cat AV Colours is a fast drying 1K lacquer with good film build and excellent application characteristics. Formulated for use on wood substrates For interior use only Available in 5,000+ colours from RAL, NCS, and British Standard Also available as an aerosol, please see HMG Pre Cat AV Colours Aerosol Please note: Colours are...
Rust-Oleum Furniture Lacquer
Clear finish. Durable lacquer for protecting and enhancing painted surfaces. Ideal for furniture, cabinets, and other interior wood surfaces. Long-lasting, durable finish. Quick drying, recoatable in 2 hours.
Need Help?
Need Help?
Clear & Tinted Wood Lacquer for Floors & Furniture
Wood lacquer is a wood finish used across furniture making, cabinetry, and joinery to protect and enhance timber surfaces. It’s especially valued in workshops and commercial fit-outs where fast turnaround and a clean finish are vital. Unlike varnishes, lacquer cures quickly and allows multiple coats within the same day. This speed suits high-output environments like shopfitting and bespoke manufacturing, where appearance and durability must align.
Several lacquer types are available depending on usage. Acrylic lacquers offer non-yellowing clarity, suited to lighter woods or colour-stained surfaces. Catalysed lacquers, either pre- or post-mixed, provide increased toughness for high-traffic areas such as bars, retail counters, or kitchen cabinets. Water-based options reduce odour and environmental impact while still delivering a strong film.
Finish options range from high gloss to ultra-matt, with products selected based on visual requirements and the wood’s natural grain. Lacquer is commonly used on oak, ash, pine, beech, and similar hardwoods and softwoods. It enhances grain definition while forming a sealed, wipeable surface.
To ensure good adhesion and performance, the substrate should be clean, dry, and sanded smooth. Bare timber, stained wood, or primed surfaces can all be suitable bases, depending on the product used. As with all coatings, application by spray is most common, but some water-based lacquers can be brushed. Users are advised to consult product data sheets or request technical guidance before use.
Wood Lacquer FAQs
Can wood lacquer be used outdoors?
Most wood lacquers are formulated for indoor use. For exterior timber, a UV-resistant varnish or specialist exterior wood coating is recommended.
Can I brush on lacquer instead of spraying?
Some water-based lacquers allow brush application, but traditional solvent-based lacquers are best sprayed for an even finish.
Does lacquer yellow over time?
Solvent-based lacquers, especially nitrocellulose types, may yellow with age. Acrylic and water-based lacquers resist discolouration.
Is lacquer heat and chemical resistant?
Catalysed lacquers offer high resistance to heat, moisture, and chemical spills. Check individual product specifications for performance ratings.
Can lacquer be tinted or coloured?
Yes. Some lacquers are pre-tinted, while others can be tinted with compatible dyes. Always verify compatibility before mixing.
Can lacquer be applied over stained wood?
Yes, provided the stain is fully dry and compatible. Always test first to ensure there is no bleeding or reaction.
How many coats are recommended?
Most applications require 2–3 coats. Drying times and recoating intervals vary by product - consult the data sheet for exact guidance.
Does lacquer protect painted wood?
Yes. Lacquer can seal painted wood to prevent scratching or moisture ingress - especially useful when upcycling floors or furniture.