Stain

How do you stain an exterior wood door?

Preparation is key when applying wood stain to joinery such as doors; using the correct techniques and following manufacturer instructions will help ensure the best protection for the surface.

The surface must be clean and dry, and free from any contaminants that could interfere with the application of the stain. It must also be frost-free, with a low moisture content. Dirt, grease, and old coatings that aren't adhering must be removed, sanding the surface down to sound and bright wood. Treat loose knots and resin bleeds appropriately.

Apply the stain in the direction of the wood grain and in line with the application instructions for the product, allowing time for the first coat of stain to dry before applying a second coat, if required.

Some of our wood stains can be coated with other wood products for extra UV protection and against blue stain, rot and insects, ensuring your wood doors and other joinery are fully protected.

How do you stain an exterior window?

The preparation steps above also apply for wood windows and frames. You will want to cover the glass and use masking tape to prevent any stain from coming into contact with the window itself. Window fittings and furnishings such as locks should be removed, or at least masked over.

Once your doors, windows, and joinery are stained to your liking, you can apply a varnish over the top for extra protection against the elements and seasonal changes. Always test a trial spot first to ensure compatibility.